Recent developments in the application of microwave energy in process metallurgy at KUST

References

• Al-Harahsheh, M., 2005, “A fundamental investigation into the microwave assisted leaching of sulphide minerals,” Doctoral thesis, University of Nottingham.
   Google Scholar
• Al-Harahsheh, M., Al-Muhtaseb, A. H., and Magee, T. R. A., 2009, “Microwave drying kinetics of tomato pomace: effect of osmotic dehydration.” Chemical Engineering and Processing, 48. pp. 524–531.
   Web of Science ®Google Scholar
• Al-Harahsheh, M., and Kingman, S. W., 2004, “Microwave-assisted leaching—a review.” Hydrometallurgy, 73(3). pp. 189–203.
   Web of Science ®Google Scholar
• Bandosz, T. J., 2006, Activated carbon surfaces in environmental remediation, Academic press.
   Google Scholar
• Binner, J. G. P., and Cross, T. E., 1993, “Applications for microwave heating in ceramic sintering: challenges and opportunities.” Journal of Hardness Material,, 4. pp.177–185.
   Google Scholar
• Bradhurst, D., and Worner, H., 1990, “The application of microwave energy in mineral processing and pyrometallurgy in Australia.” TIZ-Fachberichte, 114(4). pp. 246–249.
   Google Scholar
• Bradshaw, S. M., Van Wyk, E. J., and De Swardt, J. B., 1998, “Microwave heating principles and the application to the regeneration of granular activated carbon.” Journal of the South African Institute of Mining and Metallurgy (South Africa), 98(4). pp. 201–210.
   Google Scholar
• Chen, G., Chang, X., Chen, J., Zhao, W., and Peng, J., 2015, “Investigation of BaCO3 powders synthesized by microwave homogeneous precipitation.” High Temperature Materials and Processes, 34(8).pp. 757–764.
   Web of Science ®Google Scholar
• Church, R. H., Webb, W. E., and Salsman, J. B., 1988, Dielectric Properties of Low-Loss Minerals, Washington DC: US Department of the Interior, RI 9194.
   Google Scholar
• Dai, L., Peng, J., and Zhu, H., 2011, “Optimization of the process variables for making direct reduced iron by microwave heating using response surface methodology.,” Proceedings of TMS 2011. 2nd International Symposium on High-Temperature Metallurgical Processing, pp. 101–110.
   Google Scholar
• Das, S., Mukhopadhyay, A. K., Datta, S., and Basu, D., 2009, “Prospects of microwave processing: an overview.” Bulletin of Materials Science, 32(1). pp. 1–13.
   Web of Science ®Google Scholar
• Duan, X., Srinivasakannan, C., Peng, J., Zhang, L., and Zheng-Yong, Z., 2011, “Preparation of activated carbon from Jatropha hull with microwave heating: optimization using response surface methodology.” Fuel Processing Technology, 92(3). pp. 394–400.
   Web of Science ®Google Scholar
• Ford, J. D., and Pei, D. С. T., 1967, “High temperature chemical processing via microwave absorption.” Journal Microwave Power, 2(2). pp. 61–64.
   Google Scholar
• Gurrath, M., Kuretzky, T., Boehm, H. P., Okhlopkova, L. B., Lisitsyn, A. S., and Likholobov, V. A., 2000, “Palladium catalysts on activated carbon supports: influence of reduction temperature, origin of the support and pretreatments of the carbon surface.” Carbon, 38(8). pp. 1241–1255.
   Web of Science ®Google Scholar
• Haque, K. E., 1999, “Microwave energy for mineral treatment processes—a brief review.” International Journal of Mineral Processing, 57(1). pp. 1–24.
   Web of Science ®Google Scholar
• Henning, K. D., and Schäfer, S., 1993, “Impregnated activated carbon for environmental protection.” Gas Separation and Purification, 7(4). pp. 235–240.
   Google Scholar
• Huang, M., Peng, J., Yang, J., and Wang, J., 2006, “A new equation for the description of dielectric losses under microwave irradiation.” Journal of Physics D: Applied Physics, 39(10). pp. 2255.
   Web of Science ®Google Scholar
• Ju, S., Lu, S., Zhang, L., Peng, J., Wang, Y., and Zheng, Q., 2012a, “Method for treating zinc hydrometallurgy dechlorinated copper residue through microwave continuous roasting,” Chinese patent application No.: 201210368375, 2012.09.28.
   Google Scholar
• Ju, S., Peng, J., Zhang, L., Lu, S., and Wang, Y., 2012b, “Microwave roasting dechlorination method for treating wet-method zinc and copper smelting slag,” Chinese patent application No.: 201210095568, 2012- 08-01.
   Google Scholar
• Katz, J. D., Blake, R. D., and Kenkre, V. M., 1991, Microwave enhanced diffusion (No. LA-UR-91-1559; CONF-910430–10), New Mexico: Los Alamos National Lab, American Ceramic Society.
   Google Scholar
• Kenkre, V. M., 1991, “Theory of microwave interactions with ceramic materials.” Ceramic Transactions, 21. pp. 69–80.
   Google Scholar
• Kingman, S. W., and Rowson, N. A., 1998, “Microwave treatment of minerals-a review.” Minerals Engineering, 11(11). pp. 1081–1087.
   Web of Science ®Google Scholar
• Koleini, S. J., and Barani, K., 2012, Microwave heating applications in mineral processing, In The Development and Application of Microwave Heating, Prof, (W. Cao, Ed.), ISBN: 978-953-51-0835-1, InTech, 10.5772/45750. http://www.intechopen.com/books/the-development-and-application-of-microwave-heating/microwave-heating-applications-in-mineral-processing.
   Google Scholar
• Kumar, P., Sahoo, B. K., De, S., Kar, D. D., Chakraborty, S., and Meikap, B. C., 2010, “Iron ore grindability improvement by microwave pre-treatment.” Journal of Industrial and Engineering Chemistry, 16(5). pp. 805–812.
   Web of Science ®Google Scholar
• Li, W., Peng, J., Zhang, L., Yang, K., Xia, H., Zhang, S., and Guo, S., 2009, “Preparation of activated carbon from coconut shell chars in pilot-scale microwave heating equipment at 60kW.” Waste Management, 29(2). pp. 756–760.
   PubMed Web of Science ®Google Scholar
• Li, Z., Zhang, L., Ma, A., Peng, J., Li, J., and Liu, C., 2015, “Dechlorination of zinc oxide dust from Waelz Kiln by microwave roasting.” High Temperature Materials and Processes, 34(3). pp. 291–297.
   Web of Science ®Google Scholar
• Liu, C., Xu, Y., and Hua, Y., 1990, “Application of microwave radiation to extractive metallurgy.” Chinese JMet Sciences Technological, 6. pp. 121–124.
   Google Scholar
• Liu, J., Peng, J., Zhang, L., Guo, S., Luo, H., Chen, G., Ying., L., and Wang, H., 2010, “Experimental investigation on new type of high temperature hot air system with microwave heating.” Modern Chemical Industry, 30(9). pp. 68–72. (Chinese)
   Google Scholar
• Lovás, M., Znamenáčková, I., Zubrik, A., Kováčová, M., and Dolinská, S., 2011, “The application of microwave energy in mineral processing–a review.” Acta Montanistica Slovaca, 16(2). pp. 137.
   Web of Science ®Google Scholar
• Lu, M., Das, R. P., Li, W., Peng, J., and Zhang, L., 2013a, “Microwave mediated precipitation and aging of iron oxyhydroxides at low temperature for possible hydrometallurgical applications.” Hydrometallurgy, 134–135. pp. 110–116.
   Web of Science ®Google Scholar
• Lu, M. N., Nikoloski, A. N., Singh, P., Parsonage, D., Das, R. P., Zhang, L. B., Li, W., and Peng, J. H., 2013b, Microwave-assisted preparation and physical characterisation of iron oxyhydroxides adsorbents for arsenic removal from aqueous solutions, In Advanced Materials Research, (J. Zeng, H. Zhu and J. Kong, Eds.), Vol. 634, pp. 249–253. Trans Tech Publications.
   Google Scholar
• Mazyck, D. W., and Cannon, F. S., 2000, “Overcoming calcium catalysis during the thermal reactivation of granular activated carbon: part I. Steam-curing plus ramped-temperature N2 treatment.” Carbon, 38(13). pp. 1785–1799.
   Web of Science ®Google Scholar
• Metaxas, A. C., 1991, “Microwave heating.” Power Engineering Journal, 5(5). pp. 237–247.
   Google Scholar
• Mingos, D. M. P., and Baghurst, D. R., 1991, “Applications of microwave dielectric heating effects to synthetic problems in chemistry.” Chemical Society Review, 20(1). pp. 1–47.
   Web of Science ®Google Scholar
• Mingos, D. M. P., and Baghurst, T. W., 1999, “Microwave processing: fundamentals and applications.” Composites Part A: Applied Science and Manufacturing, 30(9). pp. 1055–1071.
   Web of Science ®Google Scholar
• Peng, Z., and Hwang, J. Y., 2015, “Microwave-assisted metallurgy.” International Materials Reviews, 60(1). pp. 30–63.
   Web of Science ®Google Scholar
• Pickles, C. A., 2009, “Microwaves in extractive metallurgy: part 2-A review of applications.” Minerals Engineering, 22(13). pp. 1112–1118.
   Web of Science ®Google Scholar
• Premaratne, W. A. P. J., and Rowson, N. A., 2015, “Microwave assisted dissolution of Sri Lankan Ilmenite: extraction and leaching kinetics of titanium and iron metals.” Journal of Science of the University of Kelaniya Sri Lanka, pp. 9, pp.1–14.
   Google Scholar
• Rosenholtz, J. L., and Dudley, T. S., 1936, The Dielectric Constant of Mineral Powders, Troy, NY:Rensselaer Polytechnic Institute.
   Google Scholar
• Salakjani, N. K., Nikoloski, A. N., and Singh, P., 2017, “Mineralogical transformations of spodumene concentrate from Greenbushes, Western Australia. Part 2: microwave heating.” Minerals Engineering, 100. pp. 191–199.
   Web of Science ®Google Scholar
• Standish, N., and Worner, H., 1991, “Microwave application in the reduction of metal oxides with carbon.” Iron and Steel Maker, 18. pp. 59–61.
   Google Scholar
• Standish, N., Worner, H. K., and Gupta, G., 1990, “Temperature distribution in microwave heated iron ore-carbon composites.” Microwave Power Electromagnet Energy, 25(2). pp. 75–80.
   Web of Science ®Google Scholar
• Sturm, G. S. J., Stefanidis, G. D., Verweij, M. D., Van Gerven, T. D. T., and Stankiewicz, A. I., 2010, “Design principles of microwave applicators for small-scale process equipment.” Chemical Engineering and Processing: Process Intensification, 49(9). pp. 912–922.
   Web of Science ®Google Scholar
• Walker, G. M., and Weatherley, L. R., 2000, “Textile wastewater treatment using granular activated carbon adsorption in fixed beds.” Separation Science and Technology, 35(9). pp. 1329–1341.
   Web of Science ®Google Scholar
• Walkiewicz, J. W., Clark, A. E., and McGill, S. L. 1991, “Microwave-assisted grinding.” IEEE Transactions on industry applications, 27(2). pp. 239–243.
   Web of Science ®Google Scholar
• Xia, D. K., and Pickles, C. A., 2000, “Microwave caustic leaching of electric arc furnace dust.” Minerals Engineering, 13(1). pp. 79–94.
   Web of Science ®Google Scholar
• Yang, J., Peng, J., Liu, B., and Luo, H., 2011, “The rapid preparation of MgO coating at low temperature by microwave liquid process.” Paint and Coatings Industry, 42(11). pp. 31–35. (Chinese)
   Google Scholar
• Yang, K., Li, S., Zhang, L., Peng, J., Chen, W., Xie, F., and Ma, A., 2016, Microwave Roasting, and leaching of an oxide-sulphide zinc ore. Hydrometallurgy, 166. pp. 243–251.
   Google Scholar
• Yang, K., Peng, J., Srinivasakannan, C., Zhang, L., Xia, H., and Duan, X., 2010, “Preparation of high surface area activated carbon from coconut shells using microwave heating.” Bioresource Technology, 101(15). pp. 6163–6169.
   PubMed Web of Science ®Google Scholar
• Zuo, F., Badev, A., Saunier, S., Goeuriot, D., Heuguet, R., and Marinel, S., 2014, “Microwave versus conventional sintering: estimate of the apparent activation energy for densification of α-alumina and zinc oxide.” Journal of the European Ceramic Society, 34(12). pp. 3103–3110.
   Web of Science ®Google Scholar