530
Views
21
CrossRef citations to date
0
Altmetric
Original Articles

Application of Knelson Concentrator for Beneficiation of Copper–Cobalt Ore Tailings

, ORCID Icon, , ORCID Icon & ORCID Icon

References

  • Ancia, P., Frenay, J., Dandois, P., and Piette, F., 1997, Comparison of the Knelson and Falcon centrifugal separators - Innovation in physical separation technologies, In Mozley International Symposium, Falmouth, Cornwall, UK, 4–5 June, pp. 53–62.
  • Angadi, S. I., Eswaraiah, C., Jeon, H. S., Mishra, B. K., and Miller, J. D., 2017, “Selection of gravity separators for the beneficiation of the Uljin Tin Ore.” Mineral Processing and Extractive Metallurgy Review, 38. pp. 54–61.
  • Chen, L., Ren, N., and Xiong, D., 2008, “Experimental study on performance of a continuous centrifugal concentrator in reconcentrating fine hematite.” International Journal Of Mineral Processing, 87 (1–2). pp. 9–16.
  • Das, A., and Sarkar, B., 2018, “Advanced gravity concentration of fine particles: A review.” Mineral Processing and Extractive Metallurgy Review. doi:10.1080/08827508.2018.1433176.
  • Das, A., Vidyadhar, A., and Mehrotra, S. P., 2009, “A novel flowsheet for the recovery of metal values from waste printed circuit boards. Resources.” Conservation and Recycling, 53. pp. 464–469.
  • Gupta, A. K., Banerjee, P. K., Dutta, A., and Mishra, A., 2007, “Recovery of clean coal fines through a combination of gravity concentrator and flotation processes.” Mineral Processing and Extractive Metallurgy Review, 28. pp. 299–319.
  • Huang, L., 1996. Upgrading of gold gravity concentrates – a study of Knelson concentrator. D.Phil. Dissertation, Mining and Metallurgical Engineering, McGill University, Montreal, Canada.
  • Jordens, A., Marion, C., Kuzmina, O., and Waters, K. E., 2014, “Surface chemistry considerations in the flotation of Bastnäsite.” Minerals Engineering, 68. pp. 119–129.
  • Jordens, A., Ying, P. C., and Waters, K. E., 2013, “A review of the beneficiation of rare earth element bearing minerals.” Minerals Engineering, 41. pp. 97–114.
  • Kime, M. B., and Kaniki, A. T., 2017, “Determination of the milling parameters of a pear–shaped ball mill for grinding a high-talc oxidised copper-cobalt ore.” CIM Journal, 8. pp. 75–86. doi:10.15834/cimj.2017.13.
  • Kime, M. B., Ntambwe, J., and Mwamba, J., 2015, “Laboratory evaluation of the flotation response of a copper cobalt oxide ore to gasoil-Rinkalore mixtures.” International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering, 9. pp. 252–258.
  • Klein, B., Altun, N. E., and Ghaffari, H., 2016, “Use of centrifugal-gravity concentration for rejection of talc and recovery improvement in base-metal flotation.” International Journal of Minerals Metallurgy, and Materials, 23. pp. 859–867.
  • Knelson, K. C., 2003, MD3 Concentrator, Operator’s manual, p. 38.
  • Laplante, A. R., Huang, L., Noaparast, M., and Nickelotopoulos, N., 1995a, A philosohper’s stone: turning tungsten and lead into gold – the use of synthetic ores to study gold gravity separation. In Proceedings of the 27th Annual Canadian Mineral Processors Conference, Ottawa, ON, Canada, pp. 379–382.
  • Laplante, A. R., Vincent, F., and Luinstra, W. F., 1996. A laboratory procedure to determine the amount of gravity recoverable gold – a case study at Hemlo gold mines. In Proceedings of the 28th Annual Canadian Mineral Processors Conference, Ottawa, ON, Canada, pp. 69–82.
  • Laplante, A. R., Woodcock, F., and Noaparast, M., 1995b, “Predicting gravity separation gold recoveries.” Minerals and Metallurgical Processing, 12. pp. 74–79.
  • Majumder, K., and Barnwal, J. P., 2006, “Modeling of enhanced gravity concentrators–present status.” Mineral Processing and Extractive Metallurgy Review, 27. pp. 61–86.
  • Meza, S. L. A., Hartmann, W., and Escobar, C. A., 1994. Recovery of placer gold using the Knelson concentrator, In Proc. Innovations in Mineral Processing Conference, June 6–8, 1994, Sudbury, Canada, pp. 339–347.
  • Patchejieff, B., Gaidarjiev, S. T., and Lazarov, D., 1994, “Technical note opportunities for fine gold recovery from a copper flotation circuit using a knelson concentrator.” Minerals Engineering, 7. pp. 405–409.
  • Poulter, S., Fitzmaurice, C., and Steward, G. 1994. The Knelson concentrator: application and operation at rosebery, In Presented at 5th Mill Operators Conf. Oct. 1994, Roxby Downs, Australia
  • Pugh, P. J., 1988, “Macromolecular organic depressants in sulphide flotation –A review 1: principles, types and applications.” International Journal of Mineral Processing, 25. pp. 101–130.
  • Ramakokovhu, M. M., Kasaini, H., and Mbaya, R. K. K., 2012, “Leaching characteristics of upgraded copper flotation tailings.” International Journal of Materials and Metallurgical Engineering, 6. p. 8.
  • Schriner, D., and Anderson, C., 2015, “Centrifugal concentration of rare earth minerals from calcitic gangue.” Journal of Metallurgical Engineering, 4. pp. 69–77. doi:10.14355/me.2015.04.009.
  • Uslu, T., Sahinoglu, E., and Yavuz, M., 2012, “Desulphurization and deashing of oxidized fine coal by knelson concentrator.” Fuel Processing Technology, 101. pp. 94–100.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.