Wet High-Intensity Magnetic Separators (WHIMS) for Recovering Iron from Tailings Deposited in Dams

References

• Bartinik, J. A., W. H. Zabel, and D. M. Hopstock. 1975. On the production of iron ore superconcentrates by high-intensity wet magnetic separation. International Journal of Mineral Processing 2:117–26. doi:10.1016/0301-7516(75)90016-2.
   Google Scholar
• Chen, L., Z. Qian, S. Wen, and S. Huang. 2013. High-gradient magnetic separation of ultrafine particles with rod matrix. Mineral Processing and Extractive Metallurgy Review 34:340–47. doi:10.1080/08827508.2012.695304.
   Web of Science ®Google Scholar
• Deer, W. A., R. A. Howie, and J. Zusman. 1977. An introduction to the rock-forming minerals, 628 p. London: Logman.
   Google Scholar
• Dwari, R. K., D. S. Rao, and P. S. R. Reddy. 2013. Magnetic separation studies for a low grade siliceous iron ore sample. International Journal of Mining Science and Technology 23:1–5. doi:10.1016/j.ijmst.2013.01.001.
   Google Scholar
• Jena, S. K., H. Sahoo, S. S. Rath, D. S. Rao, S. K. Das, and B. Das. 2015. Characterization and processing of iron ore slimes for recovery of iron values. Mineral Processing and Extractive Metallurgy Review 36 (3):174–82. doi:10.1080/08827508.2014.898300.
   Web of Science ®Google Scholar
• King, R. P. 2001. Magnetic separation. In Modeling & simulation of mineral processing systems, ed. R. P. King, 1st ed., Chapter 8, 269–88. Oxford: Butterworth Heinemann.
   Google Scholar
• Li, C., H. Sun, J. Bai, and L. Li. 2010a. Innovative methodology for comprehensive utilization of iron ore tailings Part 1. The recovery of iron from iron ore tailings using magnetic separation after magnetizing roasting. Journal of Hazardous Materials 174:71–77. doi:10.1016/j.jhazmat.2009.09.018.
   PubMed Web of Science ®Google Scholar
• Li, G., T. Jiang, M. Liu, T. Zhou, X. Fan, and G. Qiu. 2010b. Beneficiation of high-aluminium-content hematite ore by soda ash roasting. Mineral Processing and Extractive Metallurgy Review 31 (3):150–64. doi:10.1080/08827501003727030.
   Web of Science ®Google Scholar
• Martinez, H. A. G., S. Shaoxian, and A. L. Valdivieso. 2011. In situ observation of quartz particles entrained into magnetic coagulates in a uniform magnetic field. Minerals Engineering 24:963–66. doi:10.1016/j.mineng.2011.03.022.
   Web of Science ®Google Scholar
• Mohanty, S., B. Nayak, and J. Konar. 2017. Beneficiation of high-alumina bearing iron-ore slime: A case study from Eastern India. Mineral Processing and Extractive Metallurgy Review 38 (6):403–10. doi:10.1080/08827508.2017.1350955.
   Web of Science ®Google Scholar
• Oberteuffer, J. A., and I. Wechsler. 1980. Recent advances in high gradient magnetic separation. International Symposium on Fine Particle Processing. American Institute of Mining, Metallurgical, and Petroleum Engineering, Inc., vol. 2, 11179–215. Las Vegas, NV: EUA.
   Google Scholar
• Ozcan, O., and I. B. Celik. 2016. Beneficiation routes for upgrading iron ore tailings with a teetered bed separator. Separation Science and Technology 51 (17):2844–55. doi:10.1080/01496395.2016.1218514.
   Web of Science ®Google Scholar
• Pinheiro, W. F., O. B. F. Filho, and C. A. R. Neves. 2016. National department of mineral production. Brazilian mineral yearbook. National Department of Mineral Production, Brasília, Brazil, 31, (in portuguese).
   Google Scholar
• Ramdohr, P. 1980. The ore minerals and their intergrowths, 1202. 2nd ed. Oxford: Pregamon Press Ltd.
   Google Scholar
• Rasool, R., and H. Lieberwirt. 2018. A continuum based numerical modelling approach for the simulation of WHIMS. Minerals Engineering 118:97–105. doi:10.1016/j.mineng.2017.12.020.
   Web of Science ®Google Scholar
• Ribeiro, J. P., and C. H. T. Ribeiro. 2013. New mega-sized WHIMS GHX-1400: A cost effective solution to reclaim iron ore fines from tailing ponds. REM-Revista Escola De Minas 66:300–07.
   Google Scholar
• Ribeiro, J. P., C. H. T. Ribeiro, P. F. Pinto, and R. B. D. Rocha. 2017. The challenge to scavenge iron from tailings produced by flotation. A new approach: The super-WHIMS & the BigFLUX magnetic matrix. International Engineering Journal (REM) 70 (3):357–63.
   Google Scholar
• Roy, S. 2012. Recovery improvement of fine magnetic particles by floc magnetic separation. Mineral Processing and Extractive Metallurgy Review 33 (3):170–79. doi:10.1080/08827508.2011.562948.
   Web of Science ®Google Scholar
• Roy, S., and A. Das. 2008. Characterization and processing of low-grade iron ore slime from the Jilling area of India. Mineral Processing and Extractive Metallurgy Review 29 (3):213–31. doi:10.1080/08827500801997886.
   Web of Science ®Google Scholar
• Silva, J. P. M., A. E. C. Peres, and A. C. Issac. 2018. Process route for low grade itabirites concentration: Magnetic separation preceding flotation. Mineral Processing and Extractive Metallurgy Review 39 (1):68–72. doi:10.1080/08827508.2017.1399888.
   Web of Science ®Google Scholar
• Silva, M. B., and J. A. M. Luz. 2013. Magnetic scavenging of ultrafine hematite from itabirites. International Engineering Journal (REM) 66 (4):499–505.
   Google Scholar
• Srivastava, U., and S. K. Kawatra. 2009. Strategies for processing low-grade iron ore minerals. Mineral Processing and Extractive Metallurgy Review 30 (4):361–71. doi:10.1080/08827500903185208.
   Web of Science ®Google Scholar
• Svoboda, J., and T. Fujita. 2003. Recent developments in magnetic methods of material separation. Minerals Engineering 16:785–92. doi:10.1016/S0892-6875(03)00212-7.
   Web of Science ®Google Scholar
• Tripathy, S. K., Y. R. Murthy, V. Singh, and N. Suresh. 2016. Processing of ferruginous chromite ore by dry high-intensity magnetic separation. Mineral Processing and Extractive Metallurgy Review 37 (3):196–210. doi:10.1080/08827508.2016.1168418.
   Web of Science ®Google Scholar
• Tripathy, S. K., V. Singh, Y. R. Murthy, P. K. Banerjee, and N. Suresh. 2017. Influence of process parameters of dry high intensity magnetic separators on separation of hematite. International Journal of Mineral Processing 160:16–31. doi:10.1016/j.minpro.2017.01.007.
   Web of Science ®Google Scholar
• Uwadiale, G. G. O. O. 1992. Magnetizing reduction of iron ores. Mineral Processing and Extractive Metallurgy Review 11 (1–2):1–19. doi:10.1080/08827509208914211.
   Google Scholar
• Wills, B. A., and T. W. Napier-Munn. 2016. Mineral processing technology: An introduction to the practical aspects of ore treatment and mineral recovery. 7 ed. Oxford: Elselvier.
   Google Scholar
• Wolff, A. P., G. M. Costa, and F. C. Dutra. 2010. A comparative study of ultra-fine iron ore tailings from Brazil. Mineral Processing and Extractive Metallurgy Review 32 (1):47–59. doi:10.1080/08827508.2010.530718.
   Web of Science ®Google Scholar
• Yang, C., S. Li, C. Zhang, J. Bai, and Z. Guo. 2018. Application of superconducting high gradient magnetic separation technology on silica extraction from iron ore beneficiation tailings. Mineral Processing and Extractive Metallurgy Review 39 (1):44–49. doi:10.1080/08827508.2017.1324439.
   Web of Science ®Google Scholar
• Zhang, X., Y. Han, Y. Sun, Y. Lv, L. Y. Li, and Z. Tang. 2019. An novel method for iron recovery from iron ore tailings with pre-concentration followed by magnetization roasting and magnetic separation. Mineral Processing and Extractive Metallurgy Review 1–13. doi:10.1080/08827508.2019.1604522.
   Web of Science ®Google Scholar