References
- Akcil, A., F. Vegliò, F. Ferella, M. D. Okudan, and A. Tuncuk. 2015. A review of metal recovery from spent petroleum catalysts and ash. Waste Management 45:420–33. doi:https://doi.org/10.1016/j.wasman.2015.07.007.
- Amiri, F., S. Yaghmaei, and S. M. Mousavi. 2011. Bioleaching of tungsten-rich spent hydrocracking catalyst using Penicillium simplicissimum. Bioresource Technology 102:1567–73. doi:https://doi.org/10.1016/j.biortech.2010.08.087.
- Anameric, B., and S. K. Kawatra. 2007. Properties and features of direct reduced iron. Mineral Processing and Extractive Metallurgy Review 28:59–116. doi:https://doi.org/10.1080/08827500600835576.
- Angelidis, T. N., E. Tourasanidis, E. Marinou, and G. A. Stalidis. 1995. Selective dissolution of critical metals from diesel and naptha spent hydrodesulphurization catalysts. Resources, Conservation and Recycling 13:269–82. doi:https://doi.org/10.1016/0921-3449(94)00049-B.
- Asghari, I., S. M. Mousavi, F. Amiri, and S. Tavassoli. 2013. Bioleaching of spent refinery catalysts: A review. Journal of Industrial and Engineering Chemistry 19:1069–81. doi:https://doi.org/10.1016/j.jiec.2012.12.005.
- Azapagic, A. 1999. Life cycle assessment and its application to process selection, design and optimisation. Chemical Engineering Journal 73:1–21. doi:https://doi.org/10.1016/S1385-8947(99)00042-X.
- Bagreev, A. A., Y. U. A. Tarasenko, and V. V. Strelko. 1995. Reductive-sorption methods for noble metals extraction from solutions. Mineral Processing and Extractive Metallurgy Review 15:164–164. doi:https://doi.org/10.1080/08827509508936970.
- Bal, Y., K. E. Bal, G. Cote, and A. Lallam. 2004. Characterization of the solid third phases that precipitate from the organic solutions of Aliquat® 336 after extraction of molybdenum(VI) and vanadium(V). Hydrometallurgy 75:123–34. doi:https://doi.org/10.1016/j.hydromet.2004.07.004.
- Banda, R., S. H. Sohn, and M. S. Lee. 2012. Process development for the separation and recovery of Mo and Co from chloride leach liquors of petroleum refining catalyst by solvent extraction. Journal of Hazardous Materials 213–214:1–6. doi:https://doi.org/10.1016/j.jhazmat.2011.12.078.
- Banda, R., T. H. Nguyen, S. H. Sohn, and M. S. Lee. 2013. Recovery of valuable metals and regeneration of acid from the leaching solution of spent HDS catalysts by solvent extraction. Hydrometallurgy 133:161–67. doi:https://doi.org/10.1016/j.hydromet.2013.01.006.
- Beolchini, F., V. Fonti, F. Ferella, and F. Vegliò. 2010. Metal recovery from spent refinery catalysts by means of biotechnological strategies. Journal of Hazardous Materials 178:529–34. doi:https://doi.org/10.1016/j.jhazmat.2010.01.114.
- Beuther, H., and R. A. Flinn. 1963. Technique for removing metal contaminants from catalysts. Industrial & Engineering Chemistry Product Research and Development 2:53–57. doi:https://doi.org/10.1021/i360005a013.
- Biswas, R. K., M. Wakihara, and M. Taniguchi. 1985. Recovery of vanadium and molybdenum from heavy oil desulphurization waste catalyst. Hydrometallurgy 14:219–30. doi:https://doi.org/10.1016/0304-386X(85)90034-9.
- Briand, L., H. Thomas, and E. Donati. 1996. Vanadium(V) reduction in Thiobacillus thiooxidans cultures on elemental sulfur. Biotechnology Letters 18:505–08. doi:https://doi.org/10.1007/BF00140192.
- Busnardo, R. G., N. G. Busnardo, G. N. Salvato, and J. C. Afonso. 2007. Processing of spent NiMo and CoMo/Al2O3 catalysts via fusion with KHSO4. Journal of Hazardous Materials 139:391–98. doi:https://doi.org/10.1016/j.jhazmat.2006.06.015.
- Chaudhary, A. J., J. D. Donaldson, S. C. Boddington, and S. M. Grimes. 1993. Heavy metals in the environment. Part II: A hydrochloric acid leaching process for the recovery of nickel value from a spent catalyst. Hydrometallurgy 34:137–50. doi:https://doi.org/10.1016/0304-386X(93)90031-8.
- Chauhan, G., K. K. Pant, and K. D. P. Nigam. 2013. Metal recovery from hydroprocessing spent catalyst: A green chemical engineering approach. Industrial and Engineering Chemistry Research 52:16724–36. doi:https://doi.org/10.1021/ie4024484.
- Chen, Y., Q. Feng, Y. Shao, G. Zhang, L. Ou, and Y. Lu. 2006a. Research on the recycling of valuable metals in spent Al2O3-based catalyst. Minerals Engineering 19:94–97. doi:https://doi.org/10.1016/j.mineng.2005.06.008.
- Chen, Y., Q. Feng, Y. Shao, G. Zhang, L. Ou, and Y. Lu. 2006b. Investigations on the extraction of molybdenum and vanadium from ammonia leaching residue of spent catalyst. International Journal of Mineral Processing 79:42–48. doi:https://doi.org/10.1016/j.minpro.2005.11.009.
- Chiriță, P. 2016. Aqueous oxidation of iron monosulfide (FeS) by molecular oxygen. Mineral Processing and Extractive Metallurgy Review 37:305–10. doi:https://doi.org/10.1080/08827508.2016.1218866.
- Cibati, A., F. Pagnanelli, and L. Toro. 2015. Metal recovery from end-of-life hydrotreating catalysts by selective precipitation: Laboratory tests and preliminary process analysis. Environmental Progress & Sustainable Energy 34:703–12. doi:https://doi.org/10.1002/ep.v34.3.
- Coman, V., B. Robotin, and P. Ilea. 2013. Nickel recovery/removal from industrial wastes: A review. Resources, Conservation and Recycling 73:229–38. doi:https://doi.org/10.1016/j.resconrec.2013.01.019.
- Dabrowski, A., Z. Hubicki, P. Podkościelny, and E. Robens. 2004. Selective removal of the heavy metal ions from waters and industrial wastewaters by ion-exchange method. Chemosphere 56:91–106. doi:https://doi.org/10.1016/j.chemosphere.2004.03.006.
- Das, G. K., S. Anand, R. P. Das, D. Muir, and P. Singh. 2000. Sulfur dioxide – A leachant for oxidic materials in aqueous and non-aqueous media. Mineral Processing and Extractive Metallurgy Review 20:377–407. doi:https://doi.org/10.1080/08827509908962483.
- Dufresne, P. 2007. Hydroprocessing catalysts regeneration and recycling. Applied Catalysis A: General 322:67–75. doi:https://doi.org/10.1016/j.apcata.2007.01.013.
- Eijsbouts, S., A. A. Battiston, and G. C. van Leerdam. 2008. Life cycle of hydroprocessing catalysts and total catalyst management. Catalysis Today 130:361–73. doi:https://doi.org/10.1016/j.cattod.2007.10.112.
- EPA, U. S. 2001. Hazardous waste management system; identification and listing of hazardous waste: Spent catalysts from dual-purpose petroleum hydroprocessing reactors. Federal Register 66:35379–84.
- Erust, C., A. Akcil, Z. Bedelova, K. Anarbekov, A. Baikonurova, and A. Tuncuk. 2016. Recovery of vanadium from spent catalysts of sulfuric acid plant by using inorganic and organic acids: Laboratory and semi-pilot tests. Waste Management 49:455–61. doi:https://doi.org/10.1016/j.wasman.2015.12.002.
- Farjana, S. H., N. Huda, and M. A. P. Mahmud. 2019. Science of the total environment life cycle analysis of copper-gold-lead-silver-zinc bene fi ciation process. Science of the Total Environment 659:41–52. doi:https://doi.org/10.1016/j.scitotenv.2018.12.318.
- Farjana, S. H., N. Huda, M. A. P. Mahmud, and C. Lang. 2018. Comparative life-cycle assessment of uranium extraction processes. Journal of Cleaner Production 202:666–83. doi:https://doi.org/10.1016/j.jclepro.2018.08.105.
- Ferella, F., A. Ognyanova, I. De Michelis, G. Taglieri, and F. Vegliò. 2011. Extraction of metals from spent hydrotreating catalysts: Physico-mechanical pre-treatments and leaching stage. Journal of Hazardous Materials 192:176–85. doi:https://doi.org/10.1016/j.jhazmat.2011.05.005.
- Ghodrat, M., M. A. Rhamdhani, P. Sharafi, and B. Samali. 2017. A comparative life cycle assessment of recycling the platinum group metals from automobile catalytic converter: An Australian perspective. Metallurgical and Materials Transactions E 4:77–88. doi:https://doi.org/10.1007/s40553-017-0109-1.
- Gholami, R. M., S. M. Borghei, and S. M. Mousavi. 2011. Bacterial leaching of a spent Mo-Co-Ni refinery catalyst using Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. Hydrometallurgy 106:26–31. doi:https://doi.org/10.1016/j.hydromet.2010.11.011.
- Goel, S., K. K. Pant, and K. D. P. Nigam. 2009. Extraction of nickel from spent catalyst using fresh and recovered EDTA. Journal of Hazardous Materials 171:253–61. doi:https://doi.org/10.1016/j.jhazmat.2009.05.131.
- Gutnikov, G., 1971, “Method of recovering metals from spent hydrorefining catalysts.” US Patent No. 3567433.
- Halt, J. A., S. C. Roache, and S. K. Kawatra. 2015. Cold bonding of iron ore concentrate pellets. Mineral Processing and Extractive Metallurgy Review 36:192–97. doi:https://doi.org/10.1080/08827508.2013.873863.
- Hauschild, M. Z., R. K. Rosenbaum, and S. I. Olsen. 2018. Life Cycle Assessment. Theory and practice. Cham, Switzerland: Springer International Publishing AG.
- Huo, Y., Z. Chang, W. Li, S. Liu, and B. Dong. 2015. Reuse and valorization of vanadium and tungsten from waste V2O5–WO3/TiO2 SCR catalyst. Waste and Biomass Valorization 6:159–65. doi:https://doi.org/10.1007/s12649-014-9335-2.
- Hyatt, D. E., 1987, “Value recovery from spent alumina-base catalyst.” US Patent No. 4657745.
- Ilhan, S., A. O. Kalpakli, C. Kahruman, and I. Yusufoglu. 2013. The use of oxalic acid as a chelating agent in the dissolution reaction of calcium molybdate. Metallurgical and Materials Transactions B 44:495–505. doi:https://doi.org/10.1007/s11663-013-9811-2.
- Jafari, M., H. Abdollahi, S. Z. Shafaei, M. Gharabaghi, H. Jafari, A. Akcil, and S. Panda. 2019. Acidophilic bioleaching: A review on the process and effect of organic–inorganic reagents and materials on its efficiency. Mineral Processing and Extractive Metallurgy Review 40:87–107. doi:https://doi.org/10.1080/08827508.2018.1481063.
- Jia, F., K. Ramirez-Muñiz, and S. Song. 2012. Preparation of microporous minerals through thermal treatment: A review. Mineral Processing and Extractive Metallurgy Review 33:404–15. doi:https://doi.org/10.1080/08827508.2011.606342.
- Jolliet, O., M. Margni, R. Charles, S. Humbert, J. Payet, G. Rebitzer, and R. Rosenbaum. 2003. IMPACT 2002+: A new life cycle impact assessment methodology. The International Journal of Life Cycle Assessment 8:324–30. doi:https://doi.org/10.1007/BF02978505.
- Kar, B. B., B. V. R. Murthy, and V. N. Misra. 2005. Extraction of molybdenum from spent catalyst by salt-roasting. International Journal of Mineral Processing 76:143–47. doi:https://doi.org/10.1016/j.minpro.2004.08.017.
- Kar, B. B., P. Datta, and V. N. Misra. 2004. Spent catalyst: Secondary source for molybdenum recovery. Hydrometallurgy 72:87–92. doi:https://doi.org/10.1016/S0304-386X(03)00122-1.
- Kesieme, U. K., H. Aral, M. Duke, N. Milne, and C. Y. Cheng. 2013. Recovery of sulphuric acid from waste and process solutions using solvent extraction. Hydrometallurgy 138:14–20. doi:https://doi.org/10.1016/j.hydromet.2013.06.005.
- Khorfan, S., A. Wahoud, and Y. Reda. 2001. Recovery of vanadium pentoxide from spent catalyst used in the manufacture of sulphuric acid. Periodica Polytechnica Chemical Engineering 45:131–37.
- Kim, D. J., D. Mishra, K. H. Park, J. G. Ahn, and D. E. Ralph. 2008. Metal leaching from spent petroleum catalyst by acidophilic bacteria in presence of pyrite. Materials Transactions 49:2383–88. doi:https://doi.org/10.2320/matertrans.MER2008187.
- Kim, D. J., H. Srichandan, C. S. Gahan, and S. W. Lee. 2012. Thermophilic bioleaching of spent petroleum refinery catalyst using Sulfolobus metallicus. Canadian Metallurgical Quarterly 51:403–12. doi:https://doi.org/10.1179/1879139512Y.0000000031.
- Kim, H. I., K. W. Lee, D. Mishra, K. M. Yi, J. H. Hong, M. K. Jun, and H. K. Park. 2014. Separation and recovery of vanadium from leached solution of spent residuehydrodesulfurization (RHDS) catalyst using solvent extraction. Journal of Industrial and Engineering Chemistry 20:4457–62. doi:https://doi.org/10.1016/j.jiec.2014.02.017.
- Kim, J. W., W. G. Lee, I. S. Hwang, J. Y. Lee, and C. Han. 2015. Recovery of tungsten from spent selective catalytic reduction catalysts by pressure leaching. Journal of Industrial and Engineering Chemistry 28:73–77. doi:https://doi.org/10.1016/j.jiec.2015.02.001.
- Kislik, V. S. 2012. Solvent extraction: Classical and novel approaches. Amsterdam, The Netherlands: Elsevier.
- Lai, Y. C., W. J. Lee, K. L. Huang, and C. M. Wu. 2008. Metal recovery from spent hydrodesulfurization catalysts using a combined acid-leaching and electrolysis process. Journal of Hazardous Materials 154:588–94. doi:https://doi.org/10.1016/j.jhazmat.2007.10.061.
- Lasheen, T. A., M. E. El-Ahmady, H. B. Hassib, and A. S. Helal. 2015. Molybdenum metallurgy review: Hydrometallurgical routes to recovery of molybdenum from ores and mineral raw materials. Mineral Processing and Extractive Metallurgy Review 36:145–73. doi:https://doi.org/10.1080/08827508.2013.868347.
- Le, M. N., and M. S. Lee. 2019. Hydrometallurgical treatment of elemental sulfur in spent catalysts by aqueous and nonaqueous solutions at low temperature. Mineral Processing and Extractive Metallurgy Review 1–10. doi:https://doi.org/10.1080/08827508.2019.1634563.
- Li, J., and J. D. Miller. 2006. A review of gold leaching in acid thiourea solutions. Mineral Processing and Extractive Metallurgy Review 27:177–214. doi:https://doi.org/10.1080/08827500500339315.
- Lozano, L. J., and D. Juan. 2001. Solvent extraction of polyvanadates from sulphate solutions by primene 81R. Its application to the recovery of vanadium from spent sulphuric acid catalysts leaching solutions. Solvent Extraction and Ion Exchange 19:659–76. doi:https://doi.org/10.1081/SEI-100103814.
- Ma, Z. Y., Y. Liu, J. K. Zhou, M. D. Liu, and Z. Z. Liu. 2019. Recovery of vanadium and molybdenum from spent petrochemical catalyst by microwave-assisted leaching. International Journal of Minerals, Metallurgy and Materials 26:33–40. doi:https://doi.org/10.1007/s12613-019-1707-y.
- Madeja, A. S., and W. Mulak. 2009. Comparison of various digestion procedures in chemical analysis of spent hydrodesulfurization catalyst. Journal of Hazardous Materials 164:776–80. doi:https://doi.org/10.1016/j.jhazmat.2008.08.072.
- Marafi, M., 2012, “Process for recovering boehmite and y-Al2O3 from spent hydroprocessing catalysts.” US Patent No. 8282897.
- Marafi, M., and A. Stanislaus. 2008. Spent hydroprocessing catalyst management: A review. Part II. Advances in metal recovery and safe disposal methods. Resources, Conservation and Recycling 53:1–26. doi:https://doi.org/10.1016/j.resconrec.2008.08.005.
- Marafi, M., and A. Stanislaus. 2011. Waste catalyst utilization: Extraction of valuable metals from spent hydroprocessing catalysts by ultrasonic-assisted leaching with acids. Industrial and Engineering Chemistry Research 50:9495–501. doi:https://doi.org/10.1021/ie200789u.
- Marafi, M., A. Stanislaus, and C. J. Mumford. 1993. Studies on rejuvenation of spent residue hydroprocessing catalysts by leaching of foulant metals: Influence of inorganic salt additives on the leaching efficiency of organic acids. Catalysis Letters 18:141–51. doi:https://doi.org/10.1007/BF00769507.
- Marafi, M., A. Stanislaus, C. J. Mumford, and M. Fahim. 1989. Regeneration of spent hydroprocessing catalysts: Metals removal. Applied Catalysis 47:85–96. doi:https://doi.org/10.1016/S0166-9834(00)83265-0.
- Marafi, M., A. Stanislaus, and M. Absi-Halabi. 1994. Heavy oil hydrotreating catalyst rejuvenation by leaching of foulant metals with ferric nitrate-organic acid mixed reagents. Applied Catalysis B: Environmental 4:19–27. doi:https://doi.org/10.1016/0926-3373(94)00010-7.
- Marafi, M., and M. S. Rana. 2018. Metal leaching from refinery waste hydroprocessing catalyst. Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering 53:951–59.
- McKinley, C., and A. Ghahreman. 2018. Hydrochloric acid regeneration in hydrometallurgical processes: A review. Mineral Processing and Extractive Metallurgy: Transactions of the Institute of Mining and Metallurgy 127:157–68. doi:https://doi.org/10.1080/03719553.2017.1330839.
- Meshram, P., and Abhilash. 2019. Recovery and recycling of cerium from primary and secondary resources- a critical review. Mineral Processing and Extractive Metallurgy Review 1–32. doi:https://doi.org/10.1080/08827508.2019.1677647.
- Meshram, P., Abhilash, and B. D. Pandey. 2019. Advanced review on extraction of nickel from primary and secondary sources. Mineral Processing and Extractive Metallurgy Review 40:157–93. doi:https://doi.org/10.1080/08827508.2018.1514300.
- Mishra, D., D. J. Kim, D. E. Ralph, J. G. Ahn, and Y. H. Rhee. 2007. Bioleaching of vanadium rich spent refinery catalysts using sulfur oxidizing lithotrophs. Hydrometallurgy 88:202–09. doi:https://doi.org/10.1016/j.hydromet.2007.05.007.
- Mishra, D., D. J. Kim, D. E. Ralph, J. G. Ahn, and Y. H. Rhee. 2008. Bioleaching of spent hydro-processing catalyst using acidophilic bacteria and its kinetics aspect. Journal of Hazardous Materials 152:1082–91. doi:https://doi.org/10.1016/j.jhazmat.2007.07.083.
- Mishra, D., G. R. Chaudhury, D. J. Kim, and J. G. Ahn. 2010. Recovery of metal values from spent petroleum catalyst using leaching-solvent extraction technique. Hydrometallurgy 101:35–40. doi:https://doi.org/10.1016/j.hydromet.2009.11.016.
- Mishra, D., J. G. Ahn, D. J. Kim, G. RoyChaudhury, and D. E. Ralph. 2009. Dissolution kinetics of spent petroleum catalyst using sulfur oxidizing acidophilic microorganisms. Journal of Hazardous Materials 167:1231–36. doi:https://doi.org/10.1016/j.jhazmat.2009.01.056.
- Moosakazemi, F., M. R. Tavakoli Mohammadi, M. Zakeri, M. J. Esmaeili, and H. Rafiei. 2020. Development of an environmentally friendly flowsheet for the hydrometallurgical recovery of nickel and aluminum from spent methanation catalyst. Journal of Cleaner Production 244:118731–118731. doi:https://doi.org/10.1016/j.jclepro.2019.118731
- Mulak, W., A. Szymczycha, A. Leśniewicz, and W. Żyrnicki. 2006. Preliminary results of metals leaching from a spent hydrodesulphurization (HDS) catalyst. Physicochemical Problems of Mineral Processing 40:69–76.
- Navarro, R., J. Guzman, I. Saucedo, J. Revilla, and E. Guibal. 2007. Vanadium recovery from oil fly ash by leaching, precipitation and solvent extraction processes. Waste Management 27:425–38. doi:https://doi.org/10.1016/j.wasman.2006.02.002.
- Nazemi, M. K., and F. Rashchi. 2012. Recovery of nickel from spent NiO/Al2O3 catalyst through sulfuric acid leaching, precipitation and solvent extraction. Waste Management and Research 30:492–97. doi:https://doi.org/10.1177/0734242X11417984.
- Nguyen, T. H., and M. S. Lee. 2015. Development of a hydrometallurgical process for the recovery of calcium molybdate and cobalt oxalate powders from spent hydrodesulphurization (HDS) catalyst. Journal of Cleaner Production 90:388–96. doi:https://doi.org/10.1016/j.jclepro.2014.11.048.
- Nikoloski, A. N., and M. J. Nicol. 2009. Addition of cobalt to lead anodes used for oxygen evolution—A literature review. Mineral Processing and Extractive Metallurgy Review 31:30–57. doi:https://doi.org/10.1080/08827500903404872.
- Padh, B., P. C. Rout, G. K. Mishra, K. R. Suresh, and B. Ramachandra Reddy. 2019. Recovery of nickel and molybdate from ammoniacal leach liquors of spent HDS catalysts using chelating ion exchange resin. Hydrometallurgy 184:88–94. doi:https://doi.org/10.1016/j.hydromet.2019.01.001.
- Pagnanelli, F., F. Ferella, I. De Michelis, and F. Vegliò. 2011. Adsorption onto activated carbon for molybdenum recovery from leach liquors of exhausted hydrotreating catalysts. Hydrometallurgy 110:67–72. doi:https://doi.org/10.1016/j.hydromet.2011.08.008.
- Painuly, A. S. 2015. Separation and recovery of vanadium from spent vanadium pentaoxide catalyst by Cyanex 272. Environmental Systems Research 4:1–7. doi:https://doi.org/10.1186/s40068-015-0032-3.
- Parhi, P. K., K. H. Park, and G. Senanayake. 2013. A kinetic study on hydrochloric acid leaching of nickel from Ni-Al2O3 spent catalyst. Journal of Industrial and Engineering Chemistry 19:589–94. doi:https://doi.org/10.1016/j.jiec.2012.09.028.
- Park, K. H., B. R. Reddy, D. Mohapatra, and C. W. Nam. 2006b. Hydrometallurgical processing and recovery of molybdenum trioxide from spent catalyst. International Journal of Mineral Processing 80:261–65. doi:https://doi.org/10.1016/j.minpro.2006.05.002.
- Park, K. H., D. Mohapatra, and B. R. Reddy. 2006a. Selective recovery of molybdenum from spent HDS catalyst using oxidative soda ash leach/carbon adsorption method. Journal of Hazardous Materials 138:311–16. doi:https://doi.org/10.1016/j.jhazmat.2006.05.115.
- Park, K. H., D. Mohapatra, and C. W. Nam. 2007. Two stage leaching of activated spent HDS catalyst and solvent extraction of aluminium using organo-phosphinic extractant, Cyanex 272. Journal of Hazardous Materials 148:287–95. doi:https://doi.org/10.1016/j.jhazmat.2007.02.034.
- Park, K. H., D. Mohapatra, C. W. Nam, and H. I. Kim. 2008. A noble process to recover metal values from spent hydrodesulphurization catalyst. Geosystem Engineering 11:7–12. doi:https://doi.org/10.1080/12269328.2008.10541278.
- Park, K. H., H. I. Kim, and P. K. Parhi. 2010. Recovery of molybdenum from spent catalyst leach solutions by solvent extraction with LIX 84-I. Separation and Purification Technology 74:294–99. doi:https://doi.org/10.1016/j.seppur.2010.06.018.
- Paulino, J. F., J. C. Afonso, and J. W. S. D. D. Cunha. 2013. Processing of spent NiW/Al2O3 catalysts. Química Nova 36:711–15. doi:https://doi.org/10.1590/S0100-40422013000500016.
- Pradhan, D., D. Mishra, D. J. Kim, J. G. Ahn, G. R. Chaudhury, and S. W. Lee. 2010. Bioleaching kinetics and multivariate analysis of spent petroleum catalyst dissolution using two acidophiles. Journal of Hazardous Materials 175:267–73. doi:https://doi.org/10.1016/j.jhazmat.2009.09.159.
- Rabah, M. A., I. F. Hewaidy, and F. E. Farghaly. 1997. Recovery of molybdenum and cobalt powders from spent hydrogenation catalyst. Powder Metallurgy 40:283–88. doi:https://doi.org/10.1179/pom.1997.40.4.283.
- Reda, M. R. 1991. Regeneration of spent hydroprocessing catalysts. 1. Effect of the Iron(II)/Iron(III) Redox couple on the selectivity of the removal of metals. Industrial and Engineering Chemistry Research 30:2148–51. doi:https://doi.org/10.1021/ie00057a014.
- Rene, E. R., E. Sahinkaya, A. Lewis, and P. N. L. Lens. 2017. Sustainable heavy metal remediation. Cham, Switzerland: Springer International Publishing AG.
- Rocchetti, L., V. Fonti, F. Vegliò, and F. Beolchini. 2013. An environmentally friendly process for the recovery of valuable metals from spent refinery catalysts. Waste Management and Research 31:568–76. doi:https://doi.org/10.1177/0734242X13476364.
- Rojas-Rodríguez, A. D., O. Flores-Fajardo, F. S. A. González, N. N. L. Castillo, and M. J. C. Gómez. 2012. Chemical treatment to recover molybdenum and vanadium from spent heavy gasoil hydrodesulfurization catalyst. Advances in Chemical Engineering and Science 2:408–12. doi:https://doi.org/10.4236/aces.2012.23050.
- Rokukawa, N., 1983, “Method for selective recovery of molybdenum and vanadium values from spent catalysts.” US Patent No. 4382068.
- Ruiz, M. C., O. Jerez, and R. Padilla. 2016. Kinetics of the cupric catalyzed oxidation of feii by oxygen at high temperature and high pressure. Mineral Processing and Extractive Metallurgy Review 37:160–67. doi:https://doi.org/10.1080/08827508.2016.1168412.
- Ruiz, V., E. Meux, M. Schneider, and V. Georgeaud. 2011. Hydrometallurgical treatment for valuable metals recovery from spent CoMo/Al2O3 Catalyst. 2. Oxidative leaching of an unroasted catalyst using H2O2. Industrial & Engineering Chemistry Research 50:5307–15. doi:https://doi.org/10.1021/ie102428r.
- Rydberg, J., M. Cox, C. Musikas, and G. R. Choppin. 2004. Solvent extraction principles and practice. New York: Marcel Dekker.
- Safarzadeh, M. S., M. S. Moats, and J. D. Miller. 2014. An update to “recent trends in the processing of enargite concentrates”. Mineral Processing and Extractive Metallurgy Review 35:390–422. doi:https://doi.org/10.1080/08827508.2012.725683.
- Sahu, K. K., A. Agarwal, and B. D. Pandey. 2005. Nickel recovery from spent nickel catalyst. Waste Management and Research 23:148–54. doi:https://doi.org/10.1177/0734242X05052334.
- Sahu, K. K., A. Agrawal, and D. Mishra. 2013. Hazardous waste to materials: Recovery of molybdenum and vanadium from acidic leach liquor of spent hydroprocessing catalyst using alamine 308. Journal of Environmental Management 125:68–73. doi:https://doi.org/10.1016/j.jenvman.2013.03.032.
- Sefton, V. B., R. Fox, and W. P. Lorenz, 1989, “Method of separately recovering metal values of petroleum refining catalyst.” US Patent No. 4861565.
- Siddiqi, H., V. K. Chandaliya, A. Suresh, P. S. Dash, and B. C. Meikap. 2019. A scale-up approach to produce highly reactive iron ore catalyzed coke for blast furnace operation. Mineral Processing and Extractive Metallurgy Review 1–11. doi:https://doi.org/10.1080/08827508.2019.1666124.
- Siemens, R. E., B. W. Jong, and J. H. Russell. 1986. Potential of spent catalysts as a source of critical metals. Conservation and Recycling 9:189–96. doi:https://doi.org/10.1016/0361-3658(86)90107-4.
- Singh, B. 2009. Treatment of spent catalyst from the nitrogenous fertilizer industry-A review of the available methods of regeneration, recovery and disposal. Journal of Hazardous Materials 167:24–37. doi:https://doi.org/10.1016/j.jhazmat.2009.01.071.
- Sleeswijk, A. W., L. F. C. M. van Oers, J. B. Guinée, J. Struijs, and M. A. J. Huijbregts. 2008. Normalisation in product life cycle assessment: An LCA of the global and European economic systems in the year 2000. Science of the Total Environment 390:227–40. doi:https://doi.org/10.1016/j.scitotenv.2007.09.040.
- Stojanovic, A., and B. K. Keppler. 2012. Ionic liquids as extracting agents for heavy metals. Separation Science and Technology 47:189–203. doi:https://doi.org/10.1080/01496395.2011.620587.
- Sun, M., Y. Wang, J. Hong, J. Dai, R. Wang, Z. Niu, and B. Xin. 2016. Life cycle assessment of a bio-hydrometallurgical treatment of spent Zn-Mn batteries. Journal of Cleaner Production 129:350–58. doi:https://doi.org/10.1016/j.jclepro.2016.04.058.
- Sun, X., Y. Ji, L. Zhang, J. Chen, and D. Li. 2010. Separation of cobalt and nickel using inner synergistic extraction from bifunctional ionic liquid extractant (Bif-ILE). Journal of Hazardous Materials 182:447–52. doi:https://doi.org/10.1016/j.jhazmat.2010.06.052.
- Sun, X., Z. Liu, W. Yang, S. Gu, and J. Yu. 2019. Solvent extraction of molybdenum (VI) from spent hydroprocessing catalyst. Environmental Progress and Sustainable Energy 38:1–9. doi:https://doi.org/10.1002/ep.v38.5.
- Suri, A. K., and C. K. Gupta. 1995. Studies on processing of nickeliferrous sources in India. Mineral Processing and Extractive Metallurgy Review 15:31–36. doi:https://doi.org/10.1080/08827509508914181.
- Suzuki, I. 2001. Microbial leaching of metals from sulfide minerals. Biotechnology Advances 19:119–32. doi:https://doi.org/10.1016/S0734-9750(01)00053-2.
- Szymczycha-Madeja, A. 2011. Kinetics of Mo, Ni, V and Al leaching from a spent hydrodesulphurization catalyst in a solution containing oxalic acid and hydrogen peroxide. Journal of Hazardous Materials 186:2157–61. doi:https://doi.org/10.1016/j.jhazmat.2010.11.120.
- Tang, K., V. Baskaran, and M. Nemati. 2009. Bacteria of the sulphur cycle: An overview of microbiology, biokinetics and their role in petroleum and mining industries. Biochemical Engineering Journal 44:73–94. doi:https://doi.org/10.1016/j.bej.2008.12.011.
- Thompson, V. S., M. Gupta, H. Jin, E. Vahidi, M. Yim, M. A. Jindra, V. Nguyen, Y. Fujita, J. W. Sutherland, Y. Jiao, et al. 2018. Techno-economic and life cycle analysis for bioleaching rare-earth elements from waste materials. ACS Sustainable Chemistry and Engineering 6:1602–09. doi:https://doi.org/10.1021/acssuschemeng.7b02771.
- Treese, S. A., P. R. Pujadó, and D. S. J. Jones. 2015. Handbook of petroleum processing. Cham, Switzerland: Springer International Publishing.
- Valverde, I. M., J. F. Paulino, and J. C. Afonso. 2008. Hydrometallurgical route to recover molybdenum, nickel, cobalt and aluminum from spent hydrotreating catalysts in sulphuric acid medium. Journal of Hazardous Materials 160:310–17. doi:https://doi.org/10.1016/j.jhazmat.2008.03.003.
- Vasudeva Rao, P. R., and Z. Kolarik. 1996. A review of third phase formation in extraction of actinides by neutral organophosphorus extractants. Solvent Extraction and Ion Exchange 14:955–93. doi:https://doi.org/10.1080/07366299608918378.
- Villarreal, M. S., B. I. Kharisov, L. M. Torres-Martinez, and V. N. Elizondo. 1999. Recovery of vanadium and molybdenum from spent petroleum catalyst of PEMEX. Industrial and Engineering Chemistry Research 38:4624–28. doi:https://doi.org/10.1021/ie980717j.
- Vuyyuru, K. R., K. K. Pant, V. V. Krishnan, and K. D. P. Nigam. 2010. Recovery of nickel from spent industrial catalysts using chelating agents. Industrial and Engineering Chemistry Research 49:2014–24. doi:https://doi.org/10.1021/ie901406e.
- Wu, W., C. Wang, W. Bao, and H. Li. 2018. Selective reduction leaching of vanadium and iron by oxalic acid from spent V2O5-WO3/TiO2 catalyst. Hydrometallurgy 179:52–59. doi:https://doi.org/10.1016/j.hydromet.2018.05.021.
- Yang, Q. Z., G. J. Qi, H. C. Low, and B. Song. 2011. Sustainable recovery of nickel from spent hydrogenation catalyst: Economics, emissions and wastes assessment. Journal of Cleaner Production 19:365–75. doi:https://doi.org/10.1016/j.jclepro.2010.11.007.
- Zeng, L., and C. Y. Cheng. 2009a. A literature review of the recovery of molybdenum and vanadium from spent hydrodesulphurisation catalysts. Part II: Separation and purification. Hydrometallurgy 98:10–20. doi:https://doi.org/10.1016/j.hydromet.2009.03.012.
- Zeng, L., and C. Y. Cheng. 2009b. A literature review of the recovery of molybdenum and vanadium from spent hydrodesulphurisation catalysts. Part I: Metallurgical processes. Hydrometallurgy 98:1–9. doi:https://doi.org/10.1016/j.hydromet.2009.03.010.
- Zhang, P., K. Inoue, K. Yoshizuka, and H. Tsuyama. 1996. Extraction and selective stripping of molybdenum(VI) and vanadium(IV) from sulfuric acid solution containing aluminum(III), cobalt(II), nickel(II) and iron(III) by LIX 63 in Exxsol D80. Hydrometallurgy 41:45–53. doi:https://doi.org/10.1016/0304-386X(95)00015-9.
- Zhao, Z., M. Guo, and M. Zhang. 2015. Extraction of molybdenum and vanadium from the spent diesel exhaust catalyst by ammonia leaching method. Journal of Hazardous Materials 286:402–09. doi:https://doi.org/10.1016/j.jhazmat.2014.12.063.