References
- Aktas, Z., J. Cilliers, and A. Banford. 2008. Dynamic froth stability: Particle size, airflow rate and conditioning time effects. International Journal of Mineral Processing 87:65–71. doi:https://doi.org/10.1016/j.minpro.2008.02.001.
- Al, R., C. R. Behera, A. Zubov, and G. Sin. 2018. Systematic framework development for the construction of surrogate models for wastewater treatment plants. Computer Aided Chemical Engineering 44:1909–14.
- Aldrich, J. 1997. R.A. Fisher and the making of maximum likelihood 1912–1922. Statistical Science. doi:https://doi.org/10.1214/ss/1030037906.
- Ali, M. M. 2007. Differential evolution with preferential crossover. European Journal of Operational Research 181:1137–47. doi:https://doi.org/10.1016/j.ejor.2005.06.077.
- Almusaied, Z., B. Asiabanpour, and S. Aslan. 2018. Optimization of solar energy harvesting: An empirical approach. Journal of Solar Energy 2018:1–8. doi:https://doi.org/10.1155/2018/9609735.
- Arancibia-Bravo, M. P., F. A. Lucay, J. López, and L. A. Cisternas. 2019. Modeling the effect of air flow, impeller speed, frother dosages, and salt concentrations on the bubbles size using response surface methodology. Minerals Engineering 132:142–48. doi:https://doi.org/10.1016/j.mineng.2018.12.001.
- Atakulreka, A., and D. Sutivong, 2007. Avoiding local minima in feedforward neural networks by simultaneous learning. In AI 2007: Advances in Artificial Intelligence. AI 2007. Lecture Notes in Computer Science, ed. M. A. Orgun and J. Thornton, vol. 4830. Berlin, Heidelberg:Springer.
- Azpurua, M. A., and K. D. Ramos. 2010. A comparison of spatial interpolation methods for estimation of average electromagnetic field magnitude. Progress In Electromagnetics Research M 14:135–45. doi:https://doi.org/10.2528/PIERM10083103.
- Bai, X., S. Wen, J. Liu, and Y. Lin. 2018. Response surface methodology for optimization of copper leaching from refractory flotation tailings. Minerals 8:165. doi:https://doi.org/10.3390/min8040165.
- Baldi, P., and P. Sadowski. 2016. A theory of local learning, the learning channel, and the optimality of backpropagation. Neural Networks 83:51–74. doi:https://doi.org/10.1016/j.neunet.2016.07.006.
- Barbian, N., E. Ventura-Medina, and J. J. Cilliers. 2003. Dynamic froth stability in froth flotation. Minerals Engineering 16:1111–16. doi:https://doi.org/10.1016/j.mineng.2003.06.010.
- Bayram, S., M. E. Ocal, E. Laptali Oral, and C. D. Atis. 2015. Comparison of multi layer perceptron (MLP) and radial basis function (RBF) for construction cost estimation: The case of Turkey. Journal of Civil Engineering and Management 22:480–90. doi:https://doi.org/10.3846/13923730.2014.897988.
- Behera, S. K., H. Meena, S. Chakraborty, and B. C. Meikap. 2018. Application of response surface methodology (RSM) for optimization of leaching parameters for ash reduction from low-grade coal. International Journal of Mining Science and Technology 28:621–29. doi:https://doi.org/10.1016/j.ijmst.2018.04.014.
- Beliakov, G., and A. Abraham. 2002. Global optimisation of neural networks using a deterministic hybrid approach. In Hybrid information systems. Advances in Soft Computing, ed. A. Abraham, M. Köppen, 79–92. Springer-Verlag Berlin Heidelberg GmbH.
- Bezerra, M. A., R. E. Santelli, E. P. Oliveira, L. S. Villar, and L. A. Escaleira. 2008. Response surface methodology (RSM) as a tool for optimization in analytical chemistry. Talanta 76:965–77. doi:https://doi.org/10.1016/j.talanta.2008.05.019.
- Bingöl, D., M. Hercan, S. Elevli, and E. Kiliç. 2012. Comparison of the results of response surface methodology and artificial neural network for the biosorption of lead using black cumin. Bioresource Technology 112:111–15. doi:https://doi.org/10.1016/j.biortech.2012.02.084.
- Box, G. E. P., and K. B. Wilson. 1951. On the Experimental Attainment of Optimum Conditions. Journal of Royal Statistical Society. Series B (Methodological) 13:1–38.
- Cai, Z., Y. Feng, H. Li, and X. Liu. 2015. Response surface optimization of reductive leaching manganese from low-grade pyrolusite using biogas residual as reductant. Mineral Processing and Extractive Metallurgy Review 36:1–6. doi:https://doi.org/10.1080/08827508.2012.762915.
- Castillo, C., C. F. Ihle, and R. I. Jeldres. 2019. Chemometric optimisation of a copper sulphide tailings flocculation process in the presence of clays. Minerals 9:582. doi:https://doi.org/10.3390/min9100582.
- Castro, S., C. Miranda, P. Toledo, and J. Laskowski. 2013. Effect of frothers on bubble coalescence and foaming in electrolyte solutions and seawater. International Journal of Mineral Processing 124:8–14. doi:https://doi.org/10.1016/j.minpro.2013.07.002.
- Charte, F., I. Romero, M. D. Pérez-Godoy, A. J. Rivera, and E. Castro. 2017. Comparative analysis of data mining and response surface methodology predictive models for enzymatic hydrolysis of pretreated olive tree biomass. Computers & Chemical Engineering 101:23–30. doi:https://doi.org/10.1016/j.compchemeng.2017.02.008.
- Chilès, J. P., and P. Delfiner. 2012. Geostatistics: Modeling spatial uncertainty, ed. D. J. Balding, N. A. C. Cressie, G. M. Fitzmaurice, H. Goldstein, Iain M. Johnstone, G. Molenberghs, D. W. Scott, A. F.M. Smith, R. S. Tsay, S. Weisberg, 2nd. Hoboken, NJ: John Wiley & Sons, Inc.
- Chin, S. H. L., and J. Berger. 2010. Analysis of pitch perception of inharmonicity in pipa strings using response surface methodology. Journal of New Music Research 39:63–73. doi:https://doi.org/10.1080/09298210903477260.
- Cisternas, L. A., F. A. Lucay, and Y. L. Botero. 2019. trends in modeling, design, and optimization of multiphase systems in minerals processing. Minerals 10:22. doi:https://doi.org/10.3390/min10010022.
- Costa, N. R., and J. Lourenço. 2016. Gaussian process model – An exploratory study in the response surface methodology. Quality and Reliability Engineering International 32:2367–80. doi:https://doi.org/10.1002/qre.1940.
- Davis, S. E., S. Cremaschi, and M. R. Eden. 2018. Efficient surrogate model development: Impact of sample size and underlying model dimensions. Computer Aided Chemical Engineering 44:979–84. doi:https://doi.org/10.1016/B978-0-444-64241-7.50158-0.
- Daya, A. A. 2015. Ordinary kriging for the estimation of vein type copper deposit: A case study of the Chelkureh. Journal of Mining and Metallurgy 51:1–14. doi:https://doi.org/10.5937/JMMA1501001D.
- Daya Sagar B. S., Q. Cheng, and F. Agterberg eds. 2018. Handbook of Mathematical Geosciences. 2018. Handbook of mathematical geosciences. Switzerland: Springer Open.
- Dehghani, A., A. Azizi, S. H. Mojtahedzadeh, and K. Gharibi. 2012. Optimizing rougher flotation parameters of the Esfordi phosphate ore. Mineral Processing and Extractive Metallurgy Review 33:260–68. doi:https://doi.org/10.1080/08827508.2011.584092.
- Deutsch, C. V., and A. G. Journel, eds. 1998. GSLIB: Geostatistical software library and user’s guide. 2nd ed, 369. New York: Oxford University Press.
- Drzymala, J., and P. Kowalczuk. 2018. Classification of flotation frothers. Minerals 8:1–24. doi:https://doi.org/10.3390/min8020053.
- Dumitru, P. D., M. Plopeanu, and D. Badea. 2013. Comparative study regarding the methods of interpolation. Recent Advances in Geodesy and Geomatics Engineering Comparative 45–52.
- E Silva, B. B., E. R. da Cunha, R. M. de Carvalho, and L. M. Tavares. 2019. Improvement in roller screening of green iron ore pellets by statistical analysis and discrete element simulations. Mineral Processing and Extractive Metallurgy Review 1–12. doi:https://doi.org/10.1080/08827508.2019.1635473.
- Ellis, S., and G. Senanayake. 2004. The effects of dissolved oxygen and cyanide dosage on gold extraction from a pyrrhotite-rich ore. Hydrometallurgy 72:39–50. doi:https://doi.org/10.1016/S0304-386X(03)00131-2.
- Eswaraiah, C., R. K. Soni, S. K. Tripathy, and L. O. Filippov. 2019. Particle classification optimization of a circulating air classifier. Mineral Processing and Extractive Metallurgy Review 40:314–22. doi:https://doi.org/10.1080/08827508.2019.1643340.
- Farrokhpay, S. 2011. The significance of froth stability in mineral flotation - A review. Advances in Colloid and Interface Science 166:1–7. doi:https://doi.org/10.1016/j.cis.2011.03.001.
- Farrokhpay, S., and M. Zanin. 2012. An investigation into the effect of water quality on froth stability. Advanced Powder Technology 23:493–97. doi:https://doi.org/10.1016/j.apt.2012.04.012.
- Feng, S., H. Zhou, and H. Dong. 2019. Using deep neural network with small dataset to predict material defects. Materials and Design 162:300–10. doi:https://doi.org/10.1016/j.matdes.2018.11.060.
- Fernandez-Redondo, M., J. Torres-Sospedra, and C. Hernandez-Espinosa, 2006. Training radial basis functions by gradient descent. The 2006 IEEE International Joint Conference on Neural Network Proceedings, Vancouver, BC, Canada.
- Fitzpatrick, R., P. Hegarty, K. Fergusson, G. Rollinson, W. Xie, and T. Mildren. 2018. Optimisation of a multi-gravity separator with novel modifications for the recovery of Ferberite. Minerals 8:191. doi:https://doi.org/10.3390/min8050191.
- Garud, S. S., I. A. Karimi, and M. Kraft. 2017. Design of computer experiments: A review. Computers and Chemical Engineering 106:71–95. doi:https://doi.org/10.1016/j.compchemeng.2017.05.010.
- Gilmour, S. G. 2006. Response surface designs for experiments in bioprocessing. Biometrics 62:323–31. doi:https://doi.org/10.1111/j.1541-0420.2005.00444.x.
- Giunta, A., S. Wojtkiewicz, and M. Eldred, 2003. Overview of modern design of experiments methods for computational simulations (Invited). 41st Aerospace Sciences Meeting and Exhibit, Reno, Nevada.
- Gong, W., Z. Cai, and D. Liang. 2014. Engineering optimization by means of an improved constrained differential evolution. Computer Methods in Applied Mechanics and Engineering 268:884–904. doi:https://doi.org/10.1016/j.cma.2013.10.019.
- Gong, W., Z. Cai, and D. Liang. 2015. Adaptive ranking mutation operator based differential evolution for constrained optimization. IEEE Transactions on Cybernetics 45:716–27. doi:https://doi.org/10.1109/TCYB.2014.2334692.
- Gong, W., Z. Cai, and Y. Wang. 2014. Repairing the crossover rate in adaptive differential evolution. Applied Soft Computing Journal 15:149–68. doi:https://doi.org/10.1016/j.asoc.2013.11.005.
- Gupta, T., T. Ghosh, G. Akdogan, and S. Bandopadhyay. 2019. Maximizing REE enrichment by froth flotation of Alaskan coal using box-behnken design. Mining, Metallurgy & Exploration 36:571–78. doi:https://doi.org/10.1007/s42461-019-0048-8.
- Hansen, T. M., n.d. http://mgstat.sourceforge.net/[online].
- Harman, B. I., H. Koseoglu, and C. O. Yigit. 2016. Performance evaluation of IDW, Kriging and multiquadric interpolation methods in producing noise mapping: A case study at the city of Isparta, Turkey. Applied Acoustics 112:147–57. doi:https://doi.org/10.1016/j.apacoust.2016.05.024.
- Hassanzadeh, A., A. Azizi, S. Kouachi, M. Karimi, and M. S. Celik. 2019. Estimation of flotation rate constant and particle-bubble interactions considering key hydrodynamic parameters and their interrelations. Minerals Engineering 141:105836. doi:https://doi.org/10.1016/j.mineng.2019.105836.
- Helton, J. C., and D. E. Burmaster. 1996. Treatment of aleatory and epistemic uncertainty in performance assesments for complex systems. Reliability Engineering & System Safety 54:91–94. doi:https://doi.org/10.1016/S0951-8320(96)00066-X.
- Helton, J. C., and W. L. Oberkampf. 2004. Alternative representations of epistemic uncertainty. Reliability Engineering and System Safety 85:1–10. doi:https://doi.org/10.1016/j.ress.2004.03.001.
- Henwood, D. 1995. The effect of conditioning on froth flotation. Master of Science in Engineering thesis, University of Cape Town, South Africa.
- Hiji, M., and M. Sospeter. 2015. Application of response surface methodology for optimization of vat leaching parameters in small scale mines: Case study of Tanzania. American Journal of Engineering, Technology and Society 2:21–25.
- Homma, T., and A. Saltelli. 1996. Importance measures in global sensitivity analysis of nonlinear models. Reliability Engineering & System Safety 52:1–17. doi:https://doi.org/10.1016/0951-8320(96)00002-6.
- Hornik, K. 1991. Approximation capabilities of multilayer feedforward networks. Neural Networks 4:251–57. doi:https://doi.org/10.1016/0893-6080(91)90009-T.
- Idri, A., A. Zakrani, and A. Zahi. 2010. Design of radial basis function neural networks for software effort estimation. International Journal of Computer Science 7:11–17.
- Ilankoon, N. D., C. Aldrich, E. A. Oraby, and J. J. Eksteen. 2019. Extraction of gold and copper from a gold ore thiosulfate leachate by use of functionalized magnetic nanoparticles. Mineral Processing and Extractive Metallurgy Review 1–12. doi:https://doi.org/10.1080/08827508.2019.1636048.
- Jacobs, R. A. 1988. Increased rates of convergence through learning rate adaptation. Neural Networks 1:295–307. doi:https://doi.org/10.1016/0893-6080(88)90003-2.
- Karayiannis, N. B. 1999. Reformulated radial basis neural networks trained by gradient descent. IEEE Transactions on Neural Networks 10:657–71. doi:https://doi.org/10.1109/72.761725.
- Karimi, P., H. Abdollahi, N. Aslan, M. Noaparast, and S. Z. Shafaei. 2010. Application of response surface method and central composite design for modeling and optimization of gold and silver recovery in cyanidation process. Mineral Processing and Extractive Metallurgy Review 32:1–16. doi:https://doi.org/10.1080/08827508.2010.508828.
- Khajeh, M., M. Kaykhaii, and A. Sharafi. 2013. Application of PSO-artificial neural network and response surface methodology for removal of methylene blue using silver nanoparticles from water samples. Journal of Industrial and Engineering Chemistry 19:1624–30. doi:https://doi.org/10.1016/j.jiec.2013.01.033.
- Kondos, P. D., G. Deschênes, and R. M. Morrison. 1995. Process optimization studies in gold cyanidation. Hydrometallurgy 39:235–50. doi:https://doi.org/10.1016/0304-386X(95)00032-C.
- Kurban, T., and E. Beşdok. 2009. A comparison of RBF neural network training algorithms for inertial sensor based terrain classification. Sensors 9:6312–29. doi:https://doi.org/10.3390/s90806312.
- Lane, W. A., and E. M. Ryan. 2018. Verification, validation, and uncertainty quantification of a sub-grid model for heat transfer in gas-particle flows with immersed horizontal cylinders. Chemical Engineering Science 176:409–20. doi:https://doi.org/10.1016/j.ces.2017.11.018.
- Li, C., and P. Somasundaran. 1992. Reversal of bubble charge in multivalent inorganic salt solutions-effect of aluminum. Journal of Colloid and Interface Science 148:587–91. doi:https://doi.org/10.1016/0021-9797(92)90193-P.
- Li, D. Q., D. Zheng, Z. J. Cao, X. S. Tang, and K. K. Phoon. 2016. Response surface methods for slope reliability analysis: Review and comparison. Engineering Geology 203:3–14. doi:https://doi.org/10.1016/j.enggeo.2015.09.003.
- Lilburne, L., and S. Tarantola. 2009. Sensitivity analysis of spatial models. International Journal of Geographical Information Science 23:151–68. doi:https://doi.org/10.1080/13658810802094995.
- Liu, W., J. Ji, H. Chen, and C. Ye. 2014. Optimal color design of psychological counseling room by design of experiments and response surface methodology. PloS One. doi:https://doi.org/10.1371/journal.pone.0090646.
- McKay, M. D., R. J. Beckman, and W. J. Conover. 2000. A comparison of three methods for selecting values of input variables in the analysis of output from a computer code. Technometrics 42:55–61. doi:https://doi.org/10.1080/00401706.2000.10485979.
- Mellado, M., L. Cisternas, F. Lucay, E. Gálvez, and F. Sepúlveda. 2018. A posteriori analysis of analytical models for heap leaching using uncertainty and global sensitivity analyses. Minerals 8:1–16. doi:https://doi.org/10.3390/min8020044.
- Melo, C. E. 2012. Análisis geoestadístico espacio tiempo basado en distancias y splines con aplicaciones. Doctor in Statistics. Universidad de Barcelona, Barcelona, Spain.
- Montgomery, D. C. 2012. Design and analysis of experiments, ed. W. Anderson, S. Russell, E. Aiello, 5th edn. New York: John Wiley & Sons, Inc.
- Moscato, P., 1989. On evolution, search, optimization, genetic algorithms and martial arts: Towards memetic algorithms. Technical report Caltech concurrent computation program, report 826. Pasadena, CA, USA.
- Nienaber, E. C., and L. Auret. 2019. Experimental modelling and plant simulation of spiral concentrators: Comparing response surface methodology and extended Holland-Batt models. Minerals Engineering 141:105833. doi:https://doi.org/10.1016/j.mineng.2019.105833.
- Nunna, V., S. Hapugoda, S. G. Eswarappa, S. K. Raparla, R. Kumar, and N. K. Nanda. 2019. Beneficiation of low-grade iron ore fines by using a circulating-type air classifier. Mineral Processing and Extractive Metallurgy Review 40:356–67. doi:https://doi.org/10.1080/08827508.2019.1635468.
- O’Hagan, A. 2006. Bayesian analysis of computer code outputs: A tutorial. Reliability Engineering and System Safety 91:1290–300. doi:https://doi.org/10.1016/j.ress.2005.11.025.
- Ofori, P., B. Firth, C. McNally, and A. Nguyen, 2009. Working effectively with saline water in coal preparation, ACARP Project Report C17046.
- Ofori, P., B. Firth, G. Franks, A. Nguyen, and G. Jameson, 2005. Impact of saline water on coal flotation. ACARP Project C13051 final report.
- Ojha, V. K., A. Abraham, and V. Snásel. 2017. Metaheuristic design of feedforward neural networks: A review of two decades of research. Engineering Applications of Artificial Intelligence 60:97–116. doi:https://doi.org/10.1016/j.engappai.2017.01.013.
- Onay, Ö., and H. Koca. 2019. Modelling and optimization of the pyrolysis of low-rank lignite by central composite design (CCD) method. International Journal of Coal Preparation and Utilization 1–11. doi:https://doi.org/10.1080/19392699.2019.1656201.
- Pasini, A., M. Lorè, and F. Ameli. 2006. Neural network modelling for the analysis of forcings/temperatures relationships at different scales in the climate system. Ecological Modelling 191:58–67. doi:https://doi.org/10.1016/j.ecolmodel.2005.08.012.
- Pianosi, F., K. Beven, J. Freer, J. W. Hall, J. Rougier, D. B. Stephenson, and T. Wagener. 2016. Sensitivity analysis of environmental models: A systematic review with practical workflow. Environmental Modelling and Software 79:214–32. doi:https://doi.org/10.1016/j.envsoft.2016.02.008.
- Porvali, A., V. Agarwal, and M. Lundström. 2019. Circulation of sodium sulfate solution produced during NiMH battery waste processing. Mining, Metallurgy & Exploration 36:979–91. doi:https://doi.org/10.1007/s42461-019-0086-2.
- Qu, J., X. Tao, L. Tang, N. Xu, and H. He. 2015. Flotation characteristics and particle size distribution of micro-fine low rank coal. Procedia Engineering 102:159–66. doi:https://doi.org/10.1016/j.proeng.2015.01.120.
- Qu, X., L. Wang, and A. V. Nguyen. 2013. Correlation of air recovery with froth stability and separation efficiency in coal flotation. Minerals Engineering 41:25–30. doi:https://doi.org/10.1016/j.mineng.2012.10.013.
- Quiñónez-Barraza, G., F. Cruz-Cobo, B. Vargas-Larreta, and F. J. Hernández. 2012. Diameter, height and volume estimation from the stump of forest species of Durango state. Revista Mexicana De Ciencias Forestales 3:23–39.
- R Core Team. 2015. R: A language and environment for statistical computing. Vienna Austria: R Foundation for Statistical Computing.
- Rahmati, S., A. Ahmadi, M. R. Hosseini, and M. M. Nasab. 2019. Optimization of continuous air-assisted solvent extraction for treating dilute Cu leach solutions using response surface methodology. Minerals Engineering 131:154–63. doi:https://doi.org/10.1016/j.mineng.2018.11.018.
- Raman, G. S. S., and M. S. Klima. 2019. Application of statistical and machine learning techniques for laboratory-scale pressure filtration: Modeling and analysis of cake moisture. Mineral Processing and Extractive Metallurgy Review 40:148–55. doi:https://doi.org/10.1080/08827508.2018.1497628.
- Razavi, S., B. A. Tolson, and D. H. Burn. 2012. Review of surrogate modeling in water resources. Water Resources Research 48. doi:https://doi.org/10.1029/2011WR011527.
- Reza, S. K., D. Sarkar, U. Daruah, and T. H. Das. 2010. Evaluation and comparison of ordinary kriging and inverse distance weighting methods for prediction of spatial variability of some chemical parameters of Dhalai district, Tripura. Agropedology 20:38–48.
- Rumelhart, D. E., G. E. Hinton, and R. J. Williams. 1986. Learning representations by back-propagating errors. Nature 323:533–36. doi:https://doi.org/10.1038/323533a0.
- Sacks, J., W. J. Welch, J. S. B. Mitchell, and P. W. Henry. 1989. Design and experiments of computer experiments. Statistical Science 4:409–23. doi:https://doi.org/10.2307/2245858.
- Sahoo, S. K., N. Suresh, and A. K. Varma. 2019. Kinetic studies on petrographic components of coal in batch flotation operation. International Journal of Coal Preparation and Utilization 39:259–80. doi:https://doi.org/10.1080/19392699.2017.1314966.
- Saltelli, A. 2002. Sensitivity analysis for importance assessment. Risk Analysis 22:579–90. doi:https://doi.org/10.1111/0272-4332.00040.
- Saltelli, A., M. Ratto, T. Andres, F. Campolongo, J. Cariboni, D. Gatelli, M. Saisana, and S. Tarantola, eds. 2008. Global sensitivity analysis. The primer. UK: John Wiley & Sons, Ltd.
- Saltelli, A., P. Annoni, I. Azzini, F. Campolongo, M. Ratto, and S. Tarantola. 2010. Variance based sensitivity analysis of model output. Design and estimator for the total sensitivity index. Computer Physics Communications 181:259–70. doi:https://doi.org/10.1016/j.cpc.2009.09.018.
- Santander, C., P. A. Robles, L. A. Cisternas, and M. Rivas. 2014. Technical-economic feasibility study of the installation of biodiesel from microalgae crops in the Atacama Desert of Chile. Fuel Processing Technology 125:267–76. doi:https://doi.org/10.1016/j.fuproc.2014.03.038.
- Schwenker, F., H. A. Kestler, and G. Palm. 2001. Three learning phases for radial-basis-function networks. Neural Networks 14:439–58. doi:https://doi.org/10.1016/S0893-6080(01)00027-2.
- Segura-Garcia, J., J. M. Navarro-Ruiz, J. J. Perez-Solano, J. Montoya-Belmonte, S. Felici-Castell, M. Cobos, and A. M. Torres-Aranda. 2018. Spatio-temporal analysis of urban acoustic environments with binaural psycho-acoustical considerations for IoT-based applications. Sensors (Switzerland) 18:690. doi:https://doi.org/10.3390/s18030690.
- Setianto, A., and T. Triandini. 2013. Comparison of Kriging and Inverse Distance Weighted (IDW) interpolation methods in lineament extraction and analysis. Journal of Southeast Asian Applied Geology 5:21–29. doi:https://doi.org/10.22146/jag.7204.
- Sezer, R., and C. Arslan. 2019. Mechano-chemical conversion of celestite in highly concentrated sodium carbonate media. Physicochemical Problems of Mineral Processing 55:324–35. doi:https://doi.org/10.5277/ppmp18134.
- Shepard, D., 1968. A two-dimensional interpolation function for irregularly-spaced data. Proceedings of the 1968 23rd ACM national conference, New York, pp. 517–24, doi:https://doi.org/10.1145/800186.810616.
- Shojaeimehr, T., F. Rahimpour, M. A. Khadivi, and M. Sadeghi. 1995. A modeling study by response surface methodology (RSM) and artificial neural network (ANN) on Cu2+ adsorption optimization using light expended clay aggregate (LECA). Journal of Industrial and Engineering Chemistry 20:870–80. doi:https://doi.org/10.1016/j.jiec.2013.06.017.
- Singh, G., R. S. Pai, and V. Kusum Devi. 2012. Response surface methodology and process optimization of sustained release pellets using Taguchi orthogonal array design and central composite design. Journal of Advanced Pharmaceutical Technology and Research. doi:https://doi.org/10.4103/2231-4040.93565.
- Storn, R., and K. Price, 1995. Differential evolution- A simple and efficient adaptive scheme for global optimization over continuous spaces. Technical Report TR-95-012.
- Storn, R., and K. Price. 1997. Differential evolution - A simple and efficient heuristic for global optimization over continuous spaces. Journal of Global Optimization 11:341–59. doi:https://doi.org/10.1023/A:1008202821328.
- Tang, Q., L. Y. Bin, S. Hu, W. Yan, Y. Yang, and T. Chen. 2010. Response surface methodology using Gaussian processes: Towards optimizing the trans-stilbene epoxidation over Co2+-NaX catalysts. Chemical Engineering Journal 156:423–31. doi:https://doi.org/10.1016/j.cej.2009.11.002.
- Turan, N. G., B. Mesci, and O. Ozgonenel. 2011. Artificial neural network (ANN) approach for modeling Zn(II) adsorption from leachate using a new biosorbent. Chemical Engineering Journal 173:98–105. doi:https://doi.org/10.1016/j.cej.2011.07.042.
- Varouchakis, E. A., D. T. Hristopulos, and G. P. Karatzas. 2012. Improving kriging of groundwater level data using nonlinear normalizing transformations—a field application. Hydrological Sciences Journal 57:1404–19. doi:https://doi.org/10.1080/02626667.2012.717174.
- Villatoro, M., C. Henríquez, and F. Sancho. 2008. Comparación de los interpoladores idw y kriging en la variación espacial de pH, CA, CICE y P del suelo. Agronomia Costarricence, San José, CR 32:1–12. doi:https://doi.org/10.1177/1094428108327450.
- Wang, X. G., Z. Tang, H. Tamura, and M. Ishii. 2004. A modified error function for the backpropagation algorithm. Neurocomputing 57:477–84. doi:https://doi.org/10.1016/j.neucom.2003.12.006.
- Wei, T., Y. Peng, and S. Vink. 2016. The joint action of saline water and flotation reagents in stabilizing froth in coal flotation. International Journal of Mineral Processing 148:15–22. doi:https://doi.org/10.1016/j.minpro.2016.01.005.
- Wen, J., T. Jiang, Y. Liu, and X. Xue. 2018. Extraction behavior of vanadium and chromium by calcification roasting-acid leaching from high chromium vanadium slag: Optimization using response surface methodology. Mineral Processing and Extractive Metallurgy Review. doi:https://doi.org/10.1080/08827508.2018.1481059.
- Werbos, P. J., 1974. Beyond Regression: New Tools for Prediction and Analysis in the Behavioral Sciences. PhD thesis, Harvard University.
- Xia, W. 2016. Biodiesel as a renewable collector for coal flotation in the future. Energy Sources, Part A: Recovery, Utilization and Environmental Effects 38:1938–43. doi:https://doi.org/10.1080/15567036.2015.1020461.
- Yasrebi, J., M. Saffari, H. Fathi, and N. Karimian. 2009. Evaluation and comparison of ordinary kriging and inverse distance weighting methods for prediction of spatial variability of some chemical parameters. Research Journal of Biological Science 4:93–102.
- Ye, G., L. Ma, L. Li, J. Liu, S. Yuan, and G. Huang. 2017. Application of Box–Behnken design and response surface methodology for modeling and optimization of batch flotation of coal. International Journal of Coal Preparation and Utilization 1–15. doi:https://doi.org/10.1080/19392699.2017.1350657.
- Ye, K. Q., W. Li, and A. Sudjianto. 2000. Algorithmic construction of optimal symmetric Latin hypercube designs. Journal of Statistical Planning and Inference 90:145–59. doi:https://doi.org/10.1016/S0378-3758(00)00105-1.
- Yeşilyurt, Z., B. Vaziri Hassas, F. Karakaş, and F. Boylu. 2017. Ultrafine coal flotation and dewatering: Selecting the surfactants of proper hydrophilic–lipophilic balance (HLB). International Journal of Coal Preparation and Utilization 1–17. doi:https://doi.org/10.1080/19392699.2017.1383246.
- Yin, F., H. Mao, and L. Hua. 2011. A hybrid of back propagation neural network and genetic algorithm for optimization of injection molding process parameters. Materials and Design 32:3457–64. doi:https://doi.org/10.1016/j.matdes.2011.01.058.
- Zhang, P., Y. C. Cheng, J. L. Tao, and Y. B. Jiao. 2016. Molding process design for asphalt mixture based on response surface methodology. Journal of Materials in Civil Engineering 28:04016120. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0001640.
- Zhao, Z. 2007. A mended hybrid learning algorithm for radial basis function neural networks to improve generalization capability. Applied Mathematical Modelling 31:1271–81. doi:https://doi.org/10.1016/j.apm.2006.04.014.