References
- Bian, Q., S. Sittipod, A. Garg, and R. P. K. Ambrose. 2015. Bulk flow properties of hard and soft wheat flours. Journal of Cereal Science 63:88–94. doi:https://doi.org/10.1016/j.jcs.2015.03.010.
- Bond, F. C. 1961. Crushing and grinding calculations Brit. Chemical Engineering, (8).
- Caballero, B., Trugo, L. C. and Finglas, P. M., 2003. Encyclopedia of food sciences and nutrition. Academic.
- Cheng, F., Y. Feng, Q. Su, D. Wei, B. Wang, and Y. Huang. 2019. Practical strategy to produce ultrafine ceramic glaze: Introducing a polycarboxylate grinding aid to the grinding process. Advanced Powder Technology 30:1655–63. doi:https://doi.org/10.1016/j.apt.2019.05.014.
- Chipakwe, V., P. Semsari, T. Karlkvist, J. Rosenkranz, and S. C. Chelgani. 2020a. A critical review on the mechanisms of chemical additives used in grinding and their effects on the downstream processes. Journal of Materials Research and Technology 9:8148–62. doi:https://doi.org/10.1016/j.jmrt.2020.05.080.
- Chipakwe, V., P. Semsari, T. Karlkvist, J. Rosenkranz, and S. C. Chelgani. 2020b. A comparative study on the e ff ect of chemical additives on dry grinding of magnetite ore. South African Journal of Chemical Engineering 34:135–41. doi:https://doi.org/10.1016/j.sajce.2020.07.011.
- Choi, H., W. Lee, and S. Kim. 2009. Effect of grinding aids on the kinetics of fine grinding energy consumed of calcite powders by a stirred ball mill. Advanced Powder Technology 20:350–54. doi:https://doi.org/10.1016/j.apt.2009.01.002.
- Csoke, B., A. Racz, and G. Mucsi. 2010. Grinding and flowing investigation on dry stirred ball milling in order to determine the influence of grinding aids. In XXV International Mineral Processing Congress 2010, (IMPC) 2010 Proceedings Brisbane, QLD, 629–36. Australia.
- Divya, S., and G. N. Ganesh. 2019. Characterization of powder flowability using FT4-powder rheometer. Journal of Pharmaceutical Sciences and Research 11:25–29. doi:https://doi.org/10.3390/ecps2012-00825.
- El-Shall, H., and P. Somasundaran. 1984. Mechanisms of grinding modification by chemical additives: Organic reagents. Powder Technology 38:267–73. doi:https://doi.org/10.1016/0032-5910(84)85008-1.
- Freeman, R. 2007. Measuring the flow properties of consolidated, conditioned and aerated powders - A comparative study using a powder rheometer and a rotational shear cell. Powder Technology 174:25–33. doi:https://doi.org/10.1016/j.powtec.2006.10.016.
- Freeman, Technology. 2007. Stability & variable flow rate method. Work Instruction.
- Freeman, Technology. 2013. Aeration method.
- Fuerstenau, D. W. 1995. Grinding Aids. KONA Powder and Particle Journal 13:5–18. doi:https://doi.org/10.14356/kona.1995006.
- Gnagne, E. H., J. Petit, C. Gaiani, J. Scher, and G. N. Amani. 2017. Characterisation of flow properties of foutou and foufou flours, staple foods in West Africa, using the FT4 powder rheometer. Journal of Food Measurement and Characterization 11:1128–36. doi:https://doi.org/10.1007/s11694-017-9489-2.
- Hao, S., B. Liu, and X. Yan. 2017. Review on research of cement grinding AIDS and certain problems. Key Engineering Materials 753 KEM 295–99. www.scientific.net https://doi.org/10.4028/KEM.753.295.
- Hare, C., U. Zafar, M. Ghadiri, T. Freeman, J. Clayton, and M. J. Murtagh. 2015. Analysis of the dynamics of the FT4 powder rheometer. Powder Technology 285:123–27. doi:https://doi.org/10.1016/j.powtec.2015.04.039.
- Hartley, J. N., K. A. Prisbrey, and O. J. Wick. 1978. Chemical additives for ore grinding: How effective are they?. Engineering and Mining Journal. 179:10 105-111.
- Hasegawa, M., M. Kimata, M. Shimane, T. Shoji, and M. Tsuruta. 2000. The effect of liquid additives on dry ultrafine grinding of quartz. Powder Technology 114:145–51. doi:https://doi.org/10.1016/S0032-5910(00)00290-4.
- He, M., Y. Wang, and E. Forssberg. 2004. Slurry rheology in wet ultrafine grinding of industrial minerals: A review. Powder Technology 147:94–112. doi:https://doi.org/10.1016/j.powtec.2004.09.032.
- Katsioti, M., P. E. Tsakiridis, P. Giannatos, Z. Tsibouki, and J. Marinos. 2009. Characterization of various cement grinding aids and their impact on grindability and cement performance. Construction and Building Materials 23:1954–59. doi:https://doi.org/10.1016/j.conbuildmat.2008.09.003.
- Klimpel, R. R., and W. Manfroy. 1978. Chemical grinding aids for increasing throughput in the wet grinding of ores. Industrial and Engineering Chemistry Process Design and Development 17:518–23. doi:https://doi.org/10.1021/i260068a022.
- Kojima, T., and J. A. Elliott. 2012. Incipient flow properties of two-component fine powder systems and their relationships with bulk density and particle contacts. Powder Technology 228:359–70. doi:https://doi.org/10.1016/j.powtec.2012.05.052.
- Kojima, T., and J. A. Elliott. 2014. A semi-empirical model relating flow properties to particle contacts in fine binary powder mixtures. Powder Technology 268:191–202. doi:https://doi.org/10.1016/j.powtec.2014.08.013.
- Leturia, M., M. Benali, S. Lagarde, I. Ronga, and K. Saleh. 2014. Characterization of flow properties of cohesive powders: A comparative study of traditional and new testing methods. Powder Technology 253:406–23. doi:https://doi.org/10.1016/j.powtec.2013.11.045.
- Liu, D. H., D. H. Birlingmair, L. E. Burkhart, and R. Markuszewski. 1989. Attrition grinding of coal in the presence of polymeric additives. Coal Preparation 6:195–206. doi:https://doi.org/10.1080/07349348908960529.
- Liu, Y., H. Lu, M. Poletto, X. Guo, and X. Gong. 2017. Bulk flow properties of pulverized coal systems and the relationship between inter-particle forces and particle contacts. Powder Technology 322:226–40. doi:https://doi.org/10.1016/j.powtec.2017.07.057.
- Locher, W. F., and H. M. Seebach. 1972. Influence of Adsoprtion Industrial Grinding. Industrial & Engineering Chemistry Process Design and Development 2:190.
- Mwanga, A., Rosenkranz, J., Lamberg, P., 2017. Development and experimental validation of the Geometallurgical Comminution Test (GCT). Miner. Eng. 108:109–114. doi:https://doi.org/10.1016/j.mineng.2017.04.001
- Nan, W., M. Ghadiri, and Y. Wang. 2017. Analysis of powder rheometry of FT4: Effect of particle shape. Chemical Engineering Science 173:374–83. doi:https://doi.org/10.1016/j.ces.2017.08.004.
- Napier-Munn, T. 2015. Is progress in energy-efficient comminution doomed?. Minerals Engineering 73:1–6. doi:https://doi.org/10.1016/j.mineng.2014.06.009.
- Orumwense, O. A., and E. Forssberg. 1992. Superfine and ultrafine grinding a literature survey. Mineral Processing and Extractive Metallurgy Review 11:107–27. doi:https://doi.org/10.1080/08827509208914216.
- Prziwara, P., S. Breitung-Faes, and A. Kwade. 2018a. Impact of grinding aids on dry grinding performance, bulk properties and surface energy. Advanced Powder Technology 29:416–25. doi:https://doi.org/10.1016/j.apt.2017.11.029.
- Prziwara, P., S. Breitung-Faes, and A. Kwade. 2018b. Impact of the powder flow behavior on continuous fine grinding in dry operated stirred media mills. Minerals Engineering 128:215–23. doi:https://doi.org/10.1016/j.mineng.2018.08.032.
- Rajendran Nair, P. B., and R. Paramasivam. 1999. Effect of grinding aids on the time-flow characteristics of the ground product from a batch ball mill. Powder Technology 101:31–42. doi:https://doi.org/10.1016/S0032-5910(98)00121-1.
- Rehbinder, P. A., and N. A. Kalinkovaskaya. 1932. Decrease in the surface energy of solid bodies and the work of dispersion during formation of an adsorption layer. Journal of Physics (USSR) 2:726–755.
- Schönert, K., 1996. The influence of particle bed configurations and confinements on particle breakage. Int. J. Mineral Process. 44–45, 1–16. doi:https://doi.org/10.1016/0301–7516(95)00017–8
- Shi, H., R. Mohanty, S. Chakravarty, R. Cabiscol, M. Morgeneyer, H. Zetzener, J. Y. Ooi, A. Kwade, S. Luding, and V. Magnanimo. 2018. Effect of particle size and cohesion on powder yielding and flow. KONA Powder and Particle Journal 2018:226–50. doi:https://doi.org/10.14356/kona.2018014.
- Singh, V., P. Dixit, R. Venugopal, and K. B. Venkatesh. 2018. Ore pretreatment methods for grinding: journey and prospects. Mineral Processing and Extractive Metallurgy Review 40:1–15. doi:https://doi.org/10.1080/08827508.2018.1479697.
- Sohoni, S., R. Sridhar, and G. Mandal. 1991. The effect of grinding aids on the fine grinding of limestone, quartz and Portland cement clinker. Powder Technology 67:277–86. doi:https://doi.org/10.1016/0032-5910(91)80109-V.
- Toprak, N. A., O. Altun, and A. H. Benzer. 2018. The effects of grinding aids on modelling of air classification of cement. Construction and Building Materials 160:564–73. doi:https://doi.org/10.1016/j.conbuildmat.2017.11.088.
- Weibel, M., and R. K. Mishra. 2014. Comprehensive understanding of grinding aids. ZKG international (Deutsch-englische Ausgabe. 1995), (6). doi:https://doi.org/10.1007/s00428-014-1656-9.
- Yun, H., L. Dong, W. Wang, Z. Bing, and L. Xiangyun, 2018. Study on the flowability of TC4 alloy powder for 3D printing. In IOP Conference Series: Materials Science and Engineering. doi: https://doi.org/10.1088/1757-899X/439/4/042006.
- Zhang, X., Z. Zhao, Y. Cui, F. Liu, Z. Huang, Y. Huang, R. Zhang, T. Freeman, X. Lu, X. Pan, et al. 2019. Effect of powder properties on the aerosolization performance of nanoporous mannitol particles as dry powder inhalation carriers. Powder Technology 358:46–54. doi:https://doi.org/10.1016/j.powtec.2018.08.058.