EXPERIMENTAL STUDY ON THE EFFECT OF LIQUID METAL SUPERHEAT AND CASTING HEIGHT ON INTERFACIAL HEAT TRANSFER COEFFICIENT

REFERENCES

• Fortin , G. , Louchez , P. and Samuel , F. H. 1992 . Factors Controlling Heat Transfer Coefficients at the Metal-Mold Interface during Solidification of Aluminum Alloys: An Analytical Study . AFS Tran. , vol. 100 : 863 – 871 .
   Google Scholar
• Griffiths , W. D. 1999 . The Heat-Transfer Coefficient during the Unidirectional Solidification of an Al-Si Alloy Casting . Metall. Mater. Trans. B , vol. 30 : 473 – 482 .
   Web of Science ®Google Scholar
• Woodbury , K. A. , Ke , Q. and Piwonke , T. S. 2000 . Mold-Metal Interfacial Heat Transfer Coefficients during Resin-Bonded Sand Casting of Aluminum A356 . AFS Trans. , vol. 108 : 259 – 265 .
   Google Scholar
• Santos , C. A. , Quaresma , J. M. V. , Garcia , A. , Siqueria , C. A. and Spim , J. A. Metal/Mold Heat Transfer Coefficients During Horizontal and Vertical Unsteady-State Solidification of Al-Cu and Sn-Pb Alloys . 4th Int. Conf. Problems in Eng. Rio de Janerio , Brazil.
   Google Scholar
• Santos , C. A. , Quaresma , J. M. V. and Garcia , A. 2001 . Determination of Transient Interfacial Heat Transfer Coefficients in Chill Mold Casting . J. Alloys Compounds , vol. 319 : 174 – 186 .
   Web of Science ®Google Scholar
• Krishnan , M. and Sharma , D. G. R. 1994 . Determination Of Heat Transfer Coefficient between Casting and Chill in Unidirectional Heat Flow . AFS Trans. , vol. 102 : 769 – 774 .
   Google Scholar
• Hwang , J. C. , Chuang , H. T. , Jong , S. H. and Hwang , W. S. 1994 . Measurement of Heat Transfer Coefficient at Metal/Mold Interface during Casting . AFS Trans. , vol. 102 : 877 – 883 .
   Google Scholar
• Krishnan , M. and Sharma , D. G. R. 1996 . Determination of the Interfacial Heat Transfer Coefficient h in Unidirectional Heat Flow by Beck's Non Linear Estimation Procedure . Int. Commun. Heat Mass Transf. , vol. 23 : 203 – 214 .
   Web of Science ®Google Scholar
• Ho , K. and Pehlke , R. D. 1983 . Transient Methods for Determination of Metal-Mold Interfacial Heat Transfer . AFS Trans. , vol. 91 : 689 – 698 .
   Google Scholar
• Ho , K. and Pehlke , R. D. 1984 . Mechanisms of Heat Transfer at a Metal-Mold Interface . AFS Trans. , vol. 92 : 587 – 598 .
   Google Scholar
• Isaac , J. , Reddy , G. P. and Sharma , G. K. 1985 . Experimental Investigation of the Influence of Casting Parameters on the Formation and Distribution of Air Gap during the Solidification of Casting in Metallic Molds . AFS Trans. , vol. 93 : 29 – 34 .
   Google Scholar
• Narayam-Prabhu , K. , Srinivas , G. and Venkataraman , N. 1993 . Modeling Heat Transfer and Solidification Behavior of Gravity Diecast Al-Cu-Si Alloy (LM21) Plates . AFS Trans. , vol. 101 : 653 – 659 .
   Google Scholar
• Kim , T. G. and Lee , Z. H. 1997 . Time-Varying Heat Transfer Coefficients between Tube-Shaped Casting and Metal Mold . Int. J. Heat Mass Transf. , vol. 40 : 3513 – 3525 .
   Web of Science ®Google Scholar
• Beck , J. V. 1970 . Nonlinear Estimation Applied to the Nonlinear Inverse Heat Conduction Problem . Int. J. Heat Mass Transf. , vol. 13 : 703 – 716 .
   Web of Science ®Google Scholar
• Kayıkcı , R. and Griffiths , W. D. 1999 . The Influence of Surface Roughness on Interfacial Heat Transfer during Casting Solidification . Foundryman , : 267 – 273 .
   Google Scholar
• Şahin , H. M. , Kocatepe , K. , Kayıkcı , R. and Akar , N. 2006 . Determination of Unidirectional Heat Transfer Coefficient during Unsteady State Solidification at Metal Chill Interface . Energy Convers. Manage. , vol. 47 : 19 – 34 .
   Web of Science ®Google Scholar
• Muojekwu , C. A. , Samarasekera , I. V. and Brimacombe , J. K. 1995 . Heat Transfer and Microstructure during the Early Stages of Metal Solidification . Metall. Mat. Trans. B , vol. 26 : 361 – 382 .
   Web of Science ®Google Scholar
• Sully , L. J. D. 1976 . The Thermal Interface between Castings and Chill Molds . AFS Trans. , vol. 84 : 735 – 744 .
   Google Scholar
• Ho , K. and Pehlke , R. D. 1985 . Metal-Mold Interfacial Heat Transfer . Metall. Trans. B , vol. 16 : 585 – 595 .
   Google Scholar
• Nishida , Y. , Droste , W. and Engler , S. 1986 . Air-Gap Formation Process at the Casting-Mold Interface and the Heat Transfer Mechanism through the Gap . Metall. Trans. B , vol. 17 : 833 – 844 .
   Google Scholar
• Chiesa , F. 1990 . Measurement of the Thermal Conductance at the Mold/Metal Interface of Permanent Molds . AFS Trans. , vol. 98 : 193 – 200 .
   Google Scholar
• El-Mahallawy , N. A. and Assar , A. M. 1991 . Effect of Melt Superheat on Heat Transfer Coefficient for the Aluminium Solidifying against Copper Chill . J. Mater. Sci. , vol. 26 : 1729 – 1733 .
   Web of Science ®Google Scholar
• Isaac , J. , Reddy , G. and Sharma , G. K. 1985 . Variations of Heat Transfer Coefficients during Solidification of Castings in Metallic Moulds . British Foundryman , vol. 78 : 465 – 468 .
   Google Scholar
• Kim , T. G. and Lee , Z. H. 1997 . Time-varying heat transfer coefficients between tube-shaped casting and metal mold . Int. J. Heat Mass. Tran. , vol. 40 : 3513 – 3525 .
   Web of Science ®Google Scholar
• Hallam , C. P. and Griffiths , W. D. 2004 . A Model of the Interfacial Heat-Transfer Coefficient for the Aluminum Gravity Die-Casting Process . Metall. Mater. Trans. , vol. 35 : 721 – 733 .
   Web of Science ®Google Scholar
• Sekhar , J. A. , Abbaschian , G. J. and Mehrabian , R. 1979 . Effect of Pressure on Metal-Die Heat Transfer Coefficient during Solidification . Mater. Sci. Eng. , vol. 40 : 105 – 110 .
   Google Scholar
• Hines , J. A. 2004 . Determination of Interfacial Heat-Transfer Boundary Condition in Aluminum Low-Pressure Permanent Mold Test Casting . Metall. Mater. Trans , vol. 35 : 299 – 311 .
   Web of Science ®Google Scholar
• Kayıkcı , R. 1999 . Metal-Mold Contact and Heat Transfer during Casting Solidification , Ph.D. Thesis Manchester , UK : The University of Manchester .
   Google Scholar
• Şahin , H. M. , Kocatepe , K. , Kayıkcı , R. and Akar , N. 2006 . The Effect of Surface Roughness of Chill on the Interfacial Heat Transfer Coefficient in Eutectic Al-Si Casting . J. Faculty Eng. Architecture Gazi Univ , vol. 21 : 473 – 481 .
   Google Scholar
• Arpaci , V. S. , Kao , S-H and Selamet , A. 1999 . Introduction to Heat Transfer , Englewood Cliffs , NJ : Prentice Hall .
   Google Scholar
• Özişik , M. N. 1994 . Finite Difference Methods in Heat Transfer , Boca Raton , FL : CRC Press .
   Google Scholar
• Incropera , F. P. and DeWitt , D. P. 1996 . Fundamentals of Heat and Mass Transfer, , 4th ed. , New York : John Wiley & Sons .
   Google Scholar
• Gafur , M. A. , Nasrul-Haque , M. and Narayan-Prabhu , K. 2003 . Effect of Chill Thickness and Superheat on Casting/Chill Interfacial Heat Transfer During Solidification of Commercially Pure Aluminum . J. Mater. Proces. Technol , vol. 133 : 257 – 265 .
   Web of Science ®Google Scholar
• Wang , G. X. and Matthys , E. F. Interfacial Thermal Contact During Rapid Solidification on a Substrate, Heat Transfer 1994 . Proc. Tenth Int. Heat Transf. Conf . Brighton , United Kingdom. vol. 4 , pp. 169 – 174 .
   Google Scholar
• Wang , G.-X. and Matthys , E. F. 2002 . Experimental Determination of the Interfacial Heat Transfer During Cooling and Solidification of Molten Metal Droplets Impacting on a Metallic Substrate: Effect of Roughness and Superheat . Int. J. Heat Mass Transf , vol. 45 : 4967 – 4981 .
   Web of Science ®Google Scholar
• Taha , M. A. , El-Mahallawy , N. A. , El-Mestekawi , M. T. and Hassan , A. A. 2001 . Estimation of Air Gap and Heat Transfer Coefficient at Different Faces of Al and Al-Si Castings Solidifying in Permanent Mould . Mater. Sci. Technol , vol. 17 ( 9 ) : 1093 – 1101 .
   Web of Science ®Google Scholar