Effects of anodic oxidation for combustion chamber on heat transfer of the piston in an aero-engine

References

• B. Karthikeyan and K. Srithar, Performance Characteristics of a Glowplug Assisted Low Heat Rejection Diesel Engine Using Ethanol, Appl. Energy, vol. 88, pp. 323–329, 2011.
   Web of Science ®Google Scholar
• M. J. Abedin, H. H. Masjuki, M. A. Kalam, A. Sanjid, and A. M. Ashraful, Combustion, Performance, and Emission Characteristics of Low Heat Rejection Engine Operating on Various Biodiesels and Vegetable Oils, Energy Convers. Manage, vol. 85, pp. 173–189, 2014.
   Web of Science ®Google Scholar
• H. A. Jalaludin, S. Abdullah, M. J. Ghazali, B. Abdullah, and N. R. Abdullah, Experimental Study of Ceramic Coated Piston Crown for Compressed Natural Gas Direct Injection Engines, Proc. Eng., vol. 68, pp. 505–511, 2013.
   Google Scholar
• S. H. Chan, Performance and Emissions Characteristics of a Partially Insulated Gasoline Engine, Int. J. Thermal Sci., vol. 40, pp. 255–261, 2001.
   Web of Science ®Google Scholar
• A. Gazis, D. Panousakis, J. Patterson, W. H. Chen, R. Chen, and J. Turner, Using In-Cylinder Gas Internal Energy Balance to Calibrate Cylinder Pressure Data and estimate Residual Gas Amount in Gasoline Homogeneous Charge Compression Ignition Combustion, Exp. Heat Transf., vol. 21, pp. 257–280, 2008.
   Web of Science ®Google Scholar
• R. Feng, J. Yang, D. Zhang, B. Deng, J. Fu, J. Liu, and X. Liu, Experimental Study on SI Engine Fuelled With Butanol–Gasoline Blend and H2O Addition, Energy Convers. Manage., vol. 74, pp. 192–200, 2013.
   Web of Science ®Google Scholar
• B. Deng, J. Yang, D. Zhang, R. Feng, J. Fu, J. Liu, K. Li, and X. Liu, The Challenges and Strategies of Butanol Application in Conventional Engines: The Sensitivity Study of Ignition and Valve Timing, Appl. Energy, vol. 108, pp. 248–260, 2013.
   Web of Science ®Google Scholar
• M. Cerit, V. Ayhan, A. Parlak, and H. Yasar, Thermal Analysis of a Partially Ceramic Coated Piston: Effect on Cold Start HC Emission in a Spark Ignition Engine, Appl. Thermal Eng., vol. 31, pp. 336–341, 2011.
   Web of Science ®Google Scholar
• M. Cerit and M. Coban, Temperature and Thermal Stress Analyses of a Ceramic-Coated Aluminum Alloy Piston Used in a Diesel Engine, Int. J. Thermal Sci., vol. 77, pp. 11–18, 2014.
   Web of Science ®Google Scholar
• M. I. Najafabadi, M. Mirsalim, V. Hosseini, and S. Alaviyoun, Experimental and Numerical Study of Piston Thermal Management Using Piston Cooling Jet, J. Mechan. Sci. Technol., vol. 28, pp. 1079–1087, 2014.
   Web of Science ®Google Scholar
• L. Zhou, M.-Z. Xie, and K. H. Luo, Numerical Study of Heat Transfer and Combustion in IC Engine with a Porous Media Piston Region, Appl. Thermal Eng., vol. 65, pp. 597–604, 2014.
   Web of Science ®Google Scholar
• M. Cerit and H. S. Soyhan, Thermal Analysis of a Combustion Chamber Surrounded by Deposits in an HCCI Engine, Appl. Thermal Eng., vol. 50, pp. 81–88, 2013.
   Web of Science ®Google Scholar
• X. Lu, Q. Li, W. Zhang, Y. Guo, T. He, and D. Zou, Thermal Analysis on Piston of Marine Diesel Engine, Appl. Thermal Eng., vol. 50, pp. 168–176, 2013.
   Web of Science ®Google Scholar
• M. J. Colaço, C. V. Teixeira, and L. M. Dutra, Thermal Analysis of a Diesel Engine Operating with Diesel–Biodiesel Blends, Fuel, vol. 89, pp. 3742–3752, 2010.
   Web of Science ®Google Scholar
• E. Buyukkaya, Thermal Analysis of Functionally Graded Coating AlSi Alloy and Steel Pistons, Surface Coatings Technol., vol. 202, pp. 3856–3865, 2008.
   Web of Science ®Google Scholar
• V. Esfahanian, A. Javaheri, and M. Ghaffarpour, Thermal Analysis of an SI Engine Piston Using Different Combustion Boundary Condition Treatments, Appl. Thermal Eng., vol. 26, pp. 277–287, 2006.
   Web of Science ®Google Scholar
• Y. Zhu, H. Liao, and C. Coddet, Transient Thermal Analysis and Coating Formation Simulation of Thermal Spray Process by Finite Difference Method, Surface Coatings Technol., vol. 200, pp. 4665–4673, 2006.
   Web of Science ®Google Scholar
• H. A. Mohammed, H. Salleh, and M. Z. Yusoff, Dynamic Calibration and Performance of Reliable and Fast-Response Coaxial Temperature Probes in a Shock Tube Facility, Exp. Heat Transf., vol. 24, pp. 109–132, 2011.
   Web of Science ®Google Scholar
• M. Cerit, Thermo Mechanical Analysis of a Partially Ceramic Coated Piston Used in an SI Engine, Surface Coatings Technol., vol. 205, pp. 3499–3505, 2011.
   Web of Science ®Google Scholar
• Y. Liu and R. D. Reitz, Modeling of Heat Conduction Within Chamber Walls for Multidimensional Internal Combustion Engine Simulations, Int. J. Heat Mass Transf., vol. 41, pp. 859–869, 1998.
   Web of Science ®Google Scholar
• Y. Li and S.-C. Kong, Coupling Conjugate Heat Transfer with In-Cylinder Combustion Modeling for Engine Simulation, Int. J. Heat Mass Transf., vol. 54, pp. 2467–2478, 2011.
   Web of Science ®Google Scholar
• J. Xin, S. Shih, E. Itano, Y. Maeda, Integration of 3D Combustion Simulations and Conjugate Heat Transfer Analysis to Quantitatively Evaluate Component Temperatures. SAE Technical Paper, Pittsburgh, Pennsylvania, USA 2003-01-3128, 2003.
   Google Scholar
• H.-W. Song, G. Yu, A. F. H. Kaplan, J.-S. Tan, and X.-L. Yu, Thermal Fatigue on Pistons Induced by Shaped High Power Laser. Part II: Design of Spatial Intensity Distribution via Numerical Simulation, Int. J. Heat Mass Transf., vol. 51, pp. 768–778, 2008.
   Web of Science ®Google Scholar
• W. J. Kim and B. Y. Lee, Thermal Analysis of a Liquid-Petroleum-Liquid Injection Engine Piston Using the Inverse Heat Conduction Method, Proc. Inst. Mechan. Eng. Part D J. Auto. Eng., vol. 222, pp. 1033–1045, 2008.
   Web of Science ®Google Scholar
• H. Aydin, Combined Effects of Thermal Barrier Coating and Blending with Diesel Fuel on Usability of Vegetable Oils in Diesel Engines, Appl. Thermal Eng., vol. 51, pp. 623–629, 2013.
   Web of Science ®Google Scholar
• V. Kumar Domakonda and R. Kumar Puli, Application of Thermal Barrier Coatings in Diesel Engines: A Review, Energy Power, vol. 2, pp. 9–17, 2012.
   Google Scholar
• T. M. Yonushonis, Overview of Thermal Barrier Coatings in Diesel Engines, J. Thermal Spray Technol., vol. 6, pp. 50–56, 1997.
   Web of Science ®Google Scholar
• H. T. D. Graeve and G. E. Thompson, Influence of Heat Transfer on Anodic Oxidation of Aluminium, J. Appl. Electrochem., vol. 32, pp. 73–83, 2002.
   Web of Science ®Google Scholar
• L. E. Fratila-Apachitei, I. De Graeve, I. Apachitei, H. Terryn, and J. Duszczyk, Electrode Temperature Evolution During Anodic Oxidation of AlSi(Cu) Alloys Studied in the Wall-Jet Reactor, Surface Coatings Technol., vol. 200, pp. 5343–5353, 2006.
   Web of Science ®Google Scholar
• H. J. M. d. C. E. V. Rebrov and J. C. Schouten, Design of a Microstructured Reactor with Integrated Heat-Exchanger for Optimum Performance of a Highly Exothermic Reaction, Catalysis Today, vol. 69, pp. 183–192, 2001.
   Web of Science ®Google Scholar
• O. O. K. N. M. Chigrinova and V. E. Chigrinov, Influence of Heat Shielding Coatings Formed by Means of Anodic Micro-Arc Oxidation on the Service Life Characteristics of Piston Engines, Powder Metallurgy Metal Ceram., vol. 443, pp. 120–124.
   Google Scholar
• M. Mosiałek, G. Nawrat, L. Szyk-Warszyńska, J. Żak, A. Maciej, K. Radwański, A. Winiarski, J. Szade, P. Nowak, and W. Simka, Anodic Oxidation of the Ti–13Nb–13Zr Alloy, J. Solid State Electrochem., vol. 18, pp. 3073–3080, 2014.
   Web of Science ®Google Scholar
• D. P. Madison, S. A. Miers, G. L. Barna, J, and L. Richerson, Comparison of Piston Temperature Measurement Methods: Templugs Versus Wireless Telemetry with Thermocouples, J. Eng. Gas Turbines Power, vol. 135, pp. 061602, 2013.
   Web of Science ®Google Scholar
• H. H. Lee, H. W. Bang, S. K. Kauh, and S. I. Kim, Piston-Temperature Measuring System Using Electromagnetic Induction with Verification by a Telemetry System, Int. J. Automot. Technol., vol. 12, pp. 351–358, 2011.
   Web of Science ®Google Scholar
• A. Gilbert, K. Kokini, and S. Sankarasubramanian, Thermal Fracture of Zirconia–Mullite Composite Thermal Barrier Coatings under Thermal Shock: An Experimental Study, Surface Coatings Technol., vol. 202, pp. 2152–2161, 2008.
   Web of Science ®Google Scholar
• T. Hejwowski, Comparative Study of Thermal Barrier Coatings for Internal Combustion Engine, Vacuum, vol. 85, pp. 610–616, 2010.
   Web of Science ®Google Scholar
• S. Aydın and C. Sayın, Impact of Thermal Barrier Coating Application on the Combustion, Performance and Emissions of a Diesel Engine Fueled with Waste Cooking Oil Biodiesel–Diesel Blends, Fuel, vol. 136, pp. 334–340, 2014.
   Web of Science ®Google Scholar