References
- S. Satcunanathan and S. Deonarine, A Two Pass Solar Air Heater, Solar Energy, vol. 15, pp. 41–49, 1973.
- R. P. Saini and J. S. Saini, Heat Transfer and Friction Factor Correlations for Artificially Roughened Ducts with Expanded Metal Mesh as Roughened Element, Int. J. Heat Mass Transf., vol. 40, pp. 973–986, 1997.
- C. Choudhary, P. M. Chauhan, H. P. Garg, and S. N. Garg, Cost Benefit Ratio of Triple Pass Solar Air Heaters, Energy Convers. Manage., vol. 37, pp. 95–116, 1996.
- K. Sopian, Supranto, W. R. W. Daud, M. Y. Othman, and B. Yatim, Thermal Performance of the Double-Pass Solar Collector with and Without Porous Media, Renew. Energy, vol. 18, pp. 557–564, 1999.
- N. K. Bansal, M. S. Sodha, and D. Singh, Analysis of a Non Porous Double Flow Solar Air Heater, Appl. Energy, vol. 12, pp. 251–258, 1982.
- H. M. Yeh, C. D. Ho, and J. Z. Hou, Collector Efficiency of Double Pass Solar Air Heater, Energy, vol. 27, pp. 715–727, 2002.
- P. Naphon, Effect of Porous Media on the Performance of the Double-Pass Flat Plate Solar Air Heater, Int. Commun. Heat Mass Transf., vol. 32, pp. 140–150, 2005.
- A. A. El-Sebaii, S. A. Enein, M. R. I. Ramadan, S. M. Shalaby, and B. M. Moharram, Thermal Performance Investigation of Double Pass-Fnned Plate Solar Air Heater, Appl. Energy, vol. 88, pp. 1727–1739, 2011.
- H. M. Yeh and C. D. Ho, Heat-Transfer Enhancement of Double-Pass Solar Air Heaters with External Recycle, J. Taiwan Inst. Chem. Eng., vol. 42, pp. 793–800, 2011.
- P. K. Dhiman, N. S. Thakur, A. Kumar, and S. Singh, An Analytical Model to Predict the Thermal Performance of a Novel Parallel flow Packed Bed Solar Air Heater, Appl. Energy, vol. 88, pp. 2157–2167, 2011.
- A. M. E. Momin, J. S. Saini, and S. C. Solanki, Heat Transfer and Friction in Solar Air Heater Duct with V-Shaped Rib Roughness on Absorber Plate, Int. J. Heat Mass Transf., vol. 45, pp. 3383–3396, 2002.
- R. P. Saini and S. K. Saini, Development of Correlation for Nusselt Number and Friction Factor for Solar Air Heater with Roughened Duct Having Arc-Shaped Wire as Artificial Roughness, Solar Energy, vol. 82, pp. 1118–1130, 2008.
- H. Gul, Enhancement of Heat Transfer in a Circular Tube with Tangential Swirl Generators, Exp. Heat Transf., vol. 19, pp. 81–93, 2006.
- Y. A. F. EI-Samadony, A. S. Abdhullah, and Z. M. Omara, Experimental Study of Stepped Solar Still Integrated with Reflectors and External Condenser, Exp. Heat Transf., vol. 28, pp. 392–404, 2015.
- ASHRAE, Method of Testing to Determine the Thermal Performance of Solar Air Heater, Standard 93–77, pp. 1–34, New York, 1997.
- R. L. Incropera and P. D. Dewitt, Introduction to Heat Transfer, 3rd ed., John Wiley and Sons Inc., New York, 1996.
- S. K. Verma and B. N. Prasad, Investigation for the Optimal Thermohydraulic Performance of Artificially Roughened Solar Air Heaters, Renew. Energy, vol. 20, pp. 19–36, 2000.
- V. S. Hans, R. P. Saini, and J. S. Saini, Performance of Artificially Roughened Solar Air Heaters—A Review, Renew. Sustain. Energy Rev., vol. 13, pp. 1854–1869, 2010.
- R. P. Varun, Saini, and S. K. Singal, A Review on Roughness Geometry Used in Solar Air Heaters, Solar Energy, vol. 81, pp. 1340–1350, 2007.