Heat transfer and Marangoni flow in a circular heat pipe using self-rewetting fluids

References

• A. Sözen, M. Gürü, T. Menlik, and M. Akta¸, Utilization of Blast Furnace Slag Nano-Fluids in Two-Phase Closed Thermo-Syphon Heat Pipes for Enhancing Heat Transfer, Exp. Heat Transfer, 2016.
   Web of Science ®Google Scholar
• Y. Barzi and M. Assadi, Evaluation of a Thermosyphon Heat Pipe Operation and Application in a Waste Heat Recovery System, Exp. Heat Transfer, vol. 28, pp. 493–510, 2015.
   Web of Science ®Google Scholar
• R. Savino, A. Cecere, and R. Paola, Surface Tension-Driven Flow in Wickless Heat Pipes with Self-Rewetting Fluids, Int. J. Heat Fluid Flow, vol. 30, pp. 380–388, 2009.
   Web of Science ®Google Scholar
• B. Poling, J. Prausnitz, and J. O'Connell, The Properties of Gases and Liquids, 5th ed., McGraw-Hill, New York, 2000.
   Google Scholar
• K. Armijo and V. Carey, An Analytical and Experimental Study of Heat Pipe Performance With a Working Fluid Exhibiting Strong Concentration Marangoni Effects, Int. J. Heat Mass Transfer, vol. 64, pp. 70–78, 2013.
   Web of Science ®Google Scholar
• Y. Zhu, X. Cui, H. Han, and S. Sun, The Study on the Difference of the Start-Up and Heat-Transfer Performance of the Pulsating Heat Pipe With Water–Acetone Mixtures, Int. J. Heat Mass Transfer, vol. 77, pp. 834–842, 2014.
   Web of Science ®Google Scholar
• R. Pachghare and A. Mahalle, Effect of Pure and Binary Fluids on Closed Loop Pulsating Heat Pipe Thermal Performance, Procedia Eng., vol. 51, pp. 624–629, 2013.
   Google Scholar
• A. Nuntaphan, J. Tiansuwan, and T. Kiatsiriroat, Enhancement of Heat Transport in Thermosyphon Air Preheater at High Temperature With Binary Working Fluid: A Case Study of TEG–water, Appl. Therm. Eng., vol. 22, pp. 251–266, 2002.
   Web of Science ®Google Scholar
• G. Burban, V. Ayel, A. Alexandre, P. Lagonotte, Y. Bertin, and C. Romestant, Experimental Investigation of a Pulsating Heat Pipe for Hybrid Vehicle Applications, Appl. Therm. Eng., vol. 50, pp. 94–103, 2013.
   Web of Science ®Google Scholar
• K. M. Armijo and V. P. Carey, Prediction of Binary Mixture Boiling Heat Transfer in Systems With Strong Marangoni Effects, Front. Heat Mass Transfer, vol. 2, pp. 23003, 2010.
   Google Scholar
• R. Senthilkumar, S. Vaidyanathan, and B. Sivaraman, Study of Heat Pipe Performance Using an Aqueous Solution of n-Butanol, Indian J. Sci. Technol., vol. 3, pp. 702–706, 2010.
   Google Scholar
• Y. Hu, T. Liu, X. Li, and S. Wang, Heat Transfer Enhancement of Micro Oscillating Heat Pipes with Self-Rewetting Fluid, Int. J. Heat Mass Transfer, vol. 70, pp. 496–503, 2014.
   Web of Science ®Google Scholar
• R. Savino, N. Francescantonio, R. Fortezza, and Y. Abe, Heat Pipes with Binary Mixtures and Inverse Marangoni Effects for Microgravity Applications, Acta Astronaut., vol. 61, pp. 16–26, 2007.
   Web of Science ®Google Scholar
• R. C. Reid, J. M. Prausnitz, and B. E. Poling, The Properties of Gases and Liquids, 4th ed., Ch. 12, McGraw-Hill, New York, 1987.
   Google Scholar
• R. Monti, Physics of Fluid in Microgravity, 1st ed., Ch. 3, Taylor and Francis, New York, 2001.
   Google Scholar
• R. Savino, A. Cecere, S. Van Vaerenbergh, Y. Abe, G. Pizzirusso, W. Tzevelecos, M. Mojahed, and Q. Galand, Some Experimental Progresses in the Study of Self-Rewetting Fluids for the SELENE Experiment to be Carried in the Thermal Platform 1 Hardware, Acta Astronaut., vol. 89, pp. 179–188, 2013.
   Web of Science ®Google Scholar
• S. M. Peyghambarzadeh, S. Shahpouri, N. Aslanzadeh, and M. Rahimnejad, Thermal Performance of Different Working Fluids in a Dual Diameter Circular Heat Pipe, Ain Shams Eng. J., vol. 4, pp. 855–861, 2013.
   Google Scholar
• J. Mustafa, S. Husain, and M. Altamush Siddiqui, Experimental Studies on Natural Convection of Water in a Closed Loop Vertical Annulus, Exp. Heat Transfer, 2016.
   Google Scholar
• M. Sarafraz, F. Hormozi, and S. M. Peyghambarzadeh, Thermal Performance and Efficiency of a Thermosyphon Heat Pipe Working with a Biologically Ecofriendly Nanofluid, Int. Commun. Heat Mass Transfer, vol. 57, pp. 297–303, 2014.
   Web of Science ®Google Scholar
• Y. Chang, C. Cheng, J. Wang, and S. Chen, Heat Pipe for Cooling of Electronic Equipment, Energy Convers. Manage., vol. 49, pp. 3398–3404, 2008.
   Web of Science ®Google Scholar
• G. Mousa, Effect of Nanofluid Concentration on the Performance of Circular Heat Pipe, Ain Shams Eng. J., vol. 2, pp. 63–69, 2011.
   Google Scholar
• R. Moffat, Describing the Uncertainties in Experimental Results, Exp. Therm. Fluid Sci., vol. 1, pp. 3–17, 1988.
   Web of Science ®Google Scholar
• Z. H. Liu and Q. Z. Zhu, Application of Aqueous Nanofluids in a Horizontal Mesh Heat Pipe, Energy Convers. Manage., vol. 52, pp. 292–300, 2011.
   Web of Science ®Google Scholar
• X. Wang, T. Yong, and C. Ping, Investigation into Performance of a Heat Pipe with Micro Grooves Fabricated by Extrusion–Ploughing Process, Energy Convers. Manage., vol. 50, pp. 1384–1388, 2009.
   Web of Science ®Google Scholar
• L. Jiang, J. Ling, L. Jiang, Y. Tang, Y. Li, W. Zhou, and J. Gao, Thermal Performance of a Novel Porous Crack Composite Wick Heat Pipe, Energy Convers. Manage., vol. 81, pp. 10–18, 2014.
   Web of Science ®Google Scholar