Role of water temperature in case of high mass flux spray cooling of a hot AISI 304 steel plate at different initial surface temperatures

References

• J. M. Ramilison and J. H. Lienhard, Transition Boiling Heat Transfer and the Film Transition Regime, J. Heat Transfer, vol. 109, pp. 2–4, 1987.
   Web of Science ®Google Scholar
• D. Dix and J. Orozco, Film Boiling Heat Transfer from a Sphere in Natural and Forced Convection of Freon-113, Exp. Heat Transfer, vol. 3, pp. 129–148, 1990.
   Web of Science ®Google Scholar
• T. Orzechowski and S. Wciślik, Experimental Analysis of the Drop Film Boiling at Ambient Pressure, Energy Convers. Manage., vol. 76, pp. 918–924, 2013.
   Web of Science ®Google Scholar
• E. F. Crafton and W. Z. Black, Heat Transfer and Evaporation Rates of Small Liquid Droplets on Heated Horizontal Surfaces, Int. J. Heat Mass Transfer, vol. 47, pp. 1187–1200, 2004.
   Web of Science ®Google Scholar
• S. S. Mohapatra, S. Chakraborty, and S. K. Pal, Experimental Studies on Different Cooling Processes to Achieve Ultra-Fast Cooling Rate for Hot Steel Plate, Exp. Heat Transfer, vol. 25, pp. 111–126, 2012.
   Web of Science ®Google Scholar
• S. V. Ravikumar, J. M. Jha, I. Sarkar, S. S. Mohapatra, S. K. Pal, and S. Chakraborty, Achievement of Ultrafast Cooling Rate in a Hot Steel Plate by Air-Atomized Spray with Different Surfactant Additives, Exp. Therm. Fluid Sci., vol. 50, pp. 79–89, 2013.
   Web of Science ®Google Scholar
• K. Kim and G. Son, Numerical Analysis of Film Boiling in Liquid Jet Impingement, Numer. Heat Transfer Part A Appl., vol. 64, pp. 695–709, 2013.
   Web of Science ®Google Scholar
• A. Sugianto, M. Narazaki, M. Kogawara, A. Shirayori, S. Y. Kim and S. Kubota, Numerical Simulation and Experimental Verification of Carburizing-Quenching Process of SCr420H Steel Helical Gear, J. Mater. Process Technol., vol. 209, pp. 3597–3609, 2009.
   Web of Science ®Google Scholar
• P. Bhattacharya, A. N. Samanta, and S. Chakraborty, Spray Evaporative Cooling to Achieve Ultra Fast Cooling in Runout Table, Int. J. Therm. Fluid Sci., vol. 48, pp. 1741–1747, 2009.
   Web of Science ®Google Scholar
• S. Deb and S. C. Yao, Analysis on Film Boiling Heat Transfer of Impacting Sprayst, Int. J. Heat Mass Transfer, vol. 32, pp. 2099–2112, 1989.
   Web of Science ®Google Scholar
• E. Cabrera and J. E. Gonzalez, A Heat Flux Correlation for Spray Cooling in the Nucleate Boiling Regime, ASME-Publ.-HTD, vol. 366, pp. 123–132, 2000.
   Google Scholar
• M. Visaria and I. Mudawar, Effects of High Sub-Cooling on Two-Phase Spray Cooling and Critical Heat Flux, Int. J. Heat Mass Transfer, vol. 51, pp. 5269–5278, 2008.
   Web of Science ®Google Scholar
• R. Refiners, U. Jeschar, and R. Scholoz, Heat Transfer During Continuous Casting Cooling Because of Spray Water, Steel Res. Int., vol. 60, pp. 442–450, 1989.
   Google Scholar
• G. Suryanarayana and P. Ghosh, Adsorption and Coalescence in Mixed-Surfactant Systems: Air-Water Interface, Ind. Eng. Chem. Res., vol. 49, pp. 1711–1724, 2010.
   Web of Science ®Google Scholar
• A. Esmaeeli and G. Tryggvason, Computations of Film Boiling. Part II: Multi-Mode Film Boiling, Int. J. Heat Mass Transfer, vol. 47, pp. 5463–5476, 2004.
   Web of Science ®Google Scholar
• Y. M. Qiao and S. Chandra, Boiling of Droplets on a Hot Surface in Low Gravity, Int. J. Heat Mass Trans., vol. 39, pp. 1379–1393, 1996.
   Web of Science ®Google Scholar
• G. Nasr, R. Sharief, and A. Yule, High Pressure Spray Cooling of a Moving Surface, J. Heat Transfer, vol. 128, pp. 752, 2006.
   Web of Science ®Google Scholar
• M. Aamir, L. Qiang, Z. Xun, H. Wang, R. Ullah, and M. Zubair, Study on Ultra Fast Cooling Behaviors of Water Spray Cooled Stainless Steel Plates, Exp. Heat Transfer, vol. 29, pp. 1–10, 2015.
   Web of Science ®Google Scholar
• Deendarlianto, Y. Takata, S. Hidaka, Indarto, A. Widyaparaga, S. Kamal, Purnomo, M. Kohno, Effect of Static Contact Angle on the Droplet Dynamics During the Evaporation of a Water Droplet on the Hot Walls, Int. J. Heat Mass Transfer, vol. 71, pp. 691–705, 2014.
   Web of Science ®Google Scholar
• S. Whitaker, Elementary Heat Transfer Analysis: Pergamon Unified Engineering Series, Pergamon Press Incorporation, New York, 1975.
   Google Scholar
• J. C. Sturgis and I. Mudawar, Critical Heat Flux in a Long, Rectangular Channel Subjected to Onesided Heating – II. Analysis of Critical Heat Flux Data, Int. J. Heat Mass Transfer, vol. 42, pp. 1849–1862, 1999.
   Web of Science ®Google Scholar
• D. I. Li and M. A. Wells, Effect of Subsurface Thermocouple Installation on the Discrepancy of the Measured Thermal History and Predicted Surface Heat Flux During a Quench Operation, Metall Mater. Trans. B, vol. 36, pp. 343–354, 2005.
   Web of Science ®Google Scholar
• D. M. Trujillo and H. R. Busby, INTEMP-Inverse Heat Transfer Analysis User’s Manual. Fountain Valley, Trucomp corporation, Canada, 2003.
   Google Scholar
• D. Peckner and I. M. Bernstein, Handbook of Stainless Steels, New York, NY, McGraw-Hill Book Company, 1977.
   Google Scholar
• S. S. Mohapatra, Satya V. Ravikumar, Surjya K. Pal, and S. Chakraborty, Ultra Fast Cooling of a Hot Steel Plate by using High Mass Flux Air Atomized Spray, Steel Res. Int., vol. 84, pp. 229–236, 2013.
   Web of Science ®Google Scholar
• G. G. Nasr and A. J. Yule, Studies of High Pressure Water Sprays from Full-Cone Atomizers, Conference Proceedings, ILASS, 1999.
   Google Scholar
• N. B. Vargaftik, B. N. Volkov, and L. D. Voljak, International Tables of the Surface Tension of Water, J. Phys. Chem. Ref. Data, vol. 12, pp. 817–820, 1983.
   Web of Science ®Google Scholar
• S. Deb and S. C. Yao, Analysis of Film Boiling Heat Transfer of Impacting Sprays, Int. J. Heat Mass Transfer, vol. 32, pp. 2099–2112, 1989.
   Web of Science ®Google Scholar
• U. Alam, J. Krol, E. Specht, and J. Schmidt, Enhancement and Local Regulation of Metal Quenching using Air Atomized Sprays, ASTM Int., vol. 5, pp. 1–10, 2008.
   Google Scholar
• S. S. Mohapatra, S. V. Ravikumar, J. M. Jha, A. K. Singh, C. Bhattacharya, S. K. Pal, and S. Chakraborty, Ultra Fast Cooling of Hot Steel Plate by Air Atomized Spray with Salt Solution, J. Heat Mass Transfer, vol. 50, pp. 587–601, 2013.
   Web of Science ®Google Scholar
• Z. Yan, R. Zhao, F. Duan, T. N. Wong, K. C. Toh, K. F. Choo, P. K. Chan, and Y. S. Chua, Two Phase Flow, Phase Change and Numerical Modeling, InTech, Ch- 13 Spray Cool., pp. 295, 2011. DOI: 10.5772/21076.
   Google Scholar
• A. Labergue, M. Gradeck, and F. Lemoine, Experimental Investigation of Spray Impingement Hydrodynamicon a Hot Surface at High Flow Rates using Phase Doppler Analysis and Infrared Thermography, Int. J. Heat Mass Transfer, vol. 100, pp. 65–78, 2015.
   Web of Science ®Google Scholar
• D. M. Trujillo and H. R. Busby, Optimal Regularization of Inverse Heat Conduction Problem using the L-curve, Int. J. Numer. Methods Heat Fluid Flow, vol. 4, pp. 447–452, 1994.
   Web of Science ®Google Scholar
• H. R. Busby and D. M. Trujillo, Numerical Solution to a Two Dimensional Inverse Heat Conduction Problem, Int. J. Numer. Methods Eng., vol. 21, pp. 349–359, 1985.
   Web of Science ®Google Scholar
• R. B. Abernethy, R. P. Benedict, and R. B. Dowdell, ASME Measurement Uncertainty, J. Fluids Eng., vol. 107, pp. 161–164, 1985.
   Web of Science ®Google Scholar