References
- O. Atear, Storage of Thermal Energy. Encyclopedia of Life Support Systems, ed: EOLSS Publishers, Oxford, UK, 2006.
- A. Gil, M. Medrano, I. Martorell, A. Lazaro, P. Dolado, B. Zalba, et al., State of the Art on High Temperature Thermal Energy Storage for Power Generation. Part 1—Concepts, Materials and Modellization, Renewable Sustainable Energy Rev., vol. 14, pp. 31–55, 2010.
- W. Tao, High Thermal Energy Storage Density Molten Salts for Parabolic through Solar Power Generation, Master of Science, Department of Metallurgical and Materials Engineering, The University of Alabama, Tuscaloosa, Alabama, 2011.
- H. Czichos, T. Saito, and L. E. Smith, Springer Handbook of Materials Measurement Methods, Springer Science & Business Media, 2007.
- G. Höhne, W. F. Hemminger, and H.-J. Flammersheim, Differential Scanning Calorimetry, Springer Science & Business Media, 2013.
- A. Solé, L. Miró, C. Barreneche, I. Martorell, and L. F. Cabeza, Review of the T-history Method to Determine Thermophysical Properties of Phase Change Materials (PCM), Renewable Sustainable Energy Rev., vol. 26, pp. 425–436, 2013.
- A. Hasan, S. McCormack, M. Huang, and B. Norton, Characterization of Phase Change Materials for Thermal Control of Photovoltaics using Differential Scanning Calorimetry and Temperature History Method, Energy Conversion Manage., vol. 81, pp. 322–329, 2014.
- M. M. Kenisarin, High-temperature Phase Change Materials for Thermal Energy Storage, Renewable Sustainable Energy Rev., vol. 14, pp. 955–970, 2010.
- T. Bauer, D. Laing, and R. Tamme, Overview of PCMs for Concentrated Solar Power in the Temperature Range 200 to 350 C, Adv. Sci. Technol., pp. 272–277, 2011.
- G. J. Janz and G. N. Truong, Melting and Premelting Properties of the Potassium Nitrate-Sodium Nitrite-sodium Nitrate Eutectic System, J. Chem. Eng. Data, vol. 28, pp. 201–202, 1983.
- F. Agyenim, N. Hewitt, P. Eames, and M. Smyth, A Review of Materials, Heat Transfer and Phase Change Problem Formulation for Latent Heat Thermal Energy Storage Systems (LHTESS), Renewable Sustainable Energy Rev., vol. 14, pp. 615–628, 2010.
- S. Ushak, A. Fernandez, and M. Gradega, Using Molten Salts and Other Liquid Sensible Storage Media in Thermal Energy Storage (TES) Systems, Adv. Therm. Energy Storage Syst. Methods Appl., p. 49, 2014.
- G. J. Janz, C. B. Allen, N. Bansal, R. Murphy, and R. Tomkins, Physical Properties Data Compilations Relevant to Energy Storage. II. Molten Salts: Data on Single and Multi-component Salt Systems, Rensselaer Polytechnic Inst., Troy, NY (USA). Cogswell Lab. 1979.
- R. Serrano-López, J. Fradera, and S. Cuesta-López, Molten Salts Database for Energy Applications, Chem. Eng. Process., vol. 73, pp. 87–102, 2013.
- G. J. Janz, U. Krebs, H. Siegenthaler, and R. Tomkins, Molten Salts: Volume 3 Nitrates, Nitrites, and Mixtures: Electrical Conductance, Density, Viscosity, and Surface Tension Data, J. Phys. Chem. Ref. Data, vol. 1, pp. 581–746, 1972.
- J. P. da Cunha and P. Eames, Thermal Energy Storage for Low and Medium Temperature Applications using Phase Change Materials–A Review, Appl. Energy, vol. 177, pp. 227–238, 2016.
- J. Waschull, R. Müller, and S. Römer, Investigation of Phase Change Materials for Elevated Temperatures, in Proceedings of the 11th international conference on thermal energy storage (Effstock 2009), 2009, pp. 14–17.
- B. D. Iverson, S. T. Broome, A. M. Kruizenga, and J. G. Cordaro, Thermal and Mechanical Properties of Nitrate Thermal Storage Salts in the Solid-phase, Solar Energy, vol. 86, pp. 2897–2911, 2012.
- L. F. Cabeza, Advances in Thermal Energy Storage Systems: Methods and Applications, Elsevier, 2014.
- Z. Yinping and J. Yi, A Simple Method, the-history Method, of Determining the Heat of Fusion, Specific Heat and Thermal Conductivity of Phase-change Materials, Meas. Sci. Technol., vol. 10, p. 201, 1999.
- A. Ç. Yunus, Heat and Mass Transfer, McGrawHill, New York, 2007.
- J. H. Peck, J.-J. Kim, C. Kang, and H. Hong, A Study of Accurate Latent Heat Measurement for a PCM with a Low Melting Temperature Using T-history Method, Int. J. Refrig., vol. 29, pp. 1225–1232, 2006.
- S. B. Stanković and P. A. Kyriacou, Improved Measurement Technique for the Characterization of Organic and Inorganic Phase Change Materials using the T-history Method, Appl. Energy, vol. 109, pp. 433–440, 2013.
- M. Righetti, G. Salvetti, and E. Tombari, Heat Capacity of Glycerol from 298 to 383K, Thermochim. Acta, vol. 316, pp. 193–195, 1998.
- R. W. Gallant and C. L. Yaws, Physical Properties of Hydrocarbons vol. 1, Houston, TX: Gulf Pub Co, 1993.
- G.-U. Kang, B.-J. Chung, and H.-J. Kim, Natural Convection Heat Transfer on a Vertical Cylinder Submerged in Fluids Having High Prandtl Number, International Journal of Heat and Mass Transfer, vol. 79, pp. 4–11, 2014.
- M. TOLEDO, Information for Users of METTLER TOLEDO Thermal Analysis systems, Mettler Toledo, vol. 11, pp. 30, 2000.
- M. Wagner and G. Widmann, Thermal Analysis in Practice, Mettler-Toledo, 2009.
- R. Al-Shannaq, J. Kurdi, S. Al-Muhtaseb, M. Dickinson, and M. Farid, Supercooling Elimination of Phase Change Materials (PCMs) Microcapsules, Energy, vol. 87, pp. 654–662, 2015.
- M. M. Farid, A. M. Khudhair, S. A. K. Razack, and S. Al-Hallaj, A Review on Phase Change Energy Storage: Materials and Applications, Energy Convers. Manage., vol. 45, pp. 1597–1615, 2004.
- C. Kramer and C. Wilson, The Phase Diagram of NaNO 3—KNO 3, Thermochim Acta, vol. 42, pp. 253–264, 1980.