Experimental determination of enhancement of heat transfer in a multiple square perforated twisted tape inserts heat exchanger tube

References

• R. Thakur, A. R. S. Suri, S. Kumar, and A. Kumar, “A review of integrated renewable energy system in power generation,” IJMPERD, vol. 3, pp. 91–100, 2013.
   Google Scholar
• A. Kumar, R. P. Saini, and J. S. Saini, “Heat and fluid flow characteristics of roughened solar air heater ducts: A review,” Renew. Energy., vol. 47, pp. 77–94, 2012. DOI: 10.1016/j.renene.2012.04.001.
   Web of Science ®Google Scholar
• A. Kumar, R. P. Saini, and J. S. Saini, “A review of thermohydraulic performance of artificially roughened solar air heaters,” Renew. Sustainable Energy Rev., vol. 37, pp. 100–122, 2014. DOI: 10.1016/j.rser.2014.04.063.
   Web of Science ®Google Scholar
• A. Kumar, et al., “Single-phase thermal and hydraulic performance analysis of a V-pattern dimpled obstacles air passage,” Exp. Heat Transfer., vol. 30, pp. 393–426, 03 September 2017. DOI: 10.1080/08916152.2016.1269139.
   Web of Science ®Google Scholar
• S. Liu and M. Sakr, “A comprehensive review on passive heat transfer enhancements in pipe exchangers,” Renew. Sustainable Energy Rev., vol. 19, pp. 64–81, March 2013. DOI: 10.1016/j.rser.2012.11.021.
   Web of Science ®Google Scholar
• A. R. S. Suri, A. Kumar, and R. Maithani, “Convective heat transfer enhancement techniques of heat exchanger tubes: A review,” Int. J. Ambient Energy, pp. 1–22, 2017. DOI: 10.1080/01430750.2017.1324816.
   Google Scholar
• G. Yakar and R. Karabacak, “Investigation of thermal performance of perforated finned heat exchangers,” Exp. Heat Transfer, vol. 28, pp. 354–365, 2014. DOI: 10.1080/08916152.2014.887159.
   Web of Science ®Google Scholar
• S. W. Chang, K.-W. Yu, and M. H. Lu, “Heat transfers in tubes fitted with single, twin, and triple twisted tapes,” Exp. Heat Transfer, vol. 18, pp. 279–294, Oct. 1, 2005. DOI: 10.1080/08916150500201560.
   Web of Science ®Google Scholar
• S. V. Patil and P. V. Vijay Babu, “Laminar heat transfer augmentation through a square duct and circular tube fitted with twisted tapes,” Exp. Heat Transfer., vol. 27, pp. 124–143, Mar. 1, 2014. DOI: 10.1080/08916152.2012.757674.
   Web of Science ®Google Scholar
• S. S. Chougule and S. K. Sahu, “Comparative study on heat transfer enhancement of low volume concentration of Al2o3–water and carbon nano-tube–water nano-fluids in transition regime using helical screw tape inserts,” Exp. Heat Transfer., vol. 29, pp. 17–36, 02 January 2016. DOI: 10.1080/08916152.2014.926432.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard, K. Nanan, C. Thianpong, and P. Eiamsa-Ard, “Thermal performance evaluation of heat exchanger tubes equipped with coupling twisted tapes,” Exp. Heat Transfer., vol. 26, pp. 413–430, 2013. DOI: 10.1080/08916152.2012.704483.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard, C. Nuntadusit, and P. Promvonge, “Effect of twin delta-winged twisted-tape on thermal performance of heat exchanger tube,” Heat Transfer Eng., vol. 34, pp. 1278–1288, 2013. DOI: 10.1080/01457632.2013.793112.
   Web of Science ®Google Scholar
• P. Murugesan, K. Mayilsamy, and S. Suresh, “Heat transfer in tubes fitted with trapezoidal-cut and plain twisted tape inserts,” Chem. Eng. Commun., vol. 198, pp. 886–904, 2011. DOI: 10.1080/00986445.2011.545294.
   Web of Science ®Google Scholar
• A. E. Zohir, M. A. Habib, and M. A. Nemitallah, “Heat transfer characteristics in a double-pipe heat exchanger equipped with coiled circular wires,” Exp. Heat Transfer, vol. 28, pp. 531–545, 2 Nov 2015. DOI: 10.1080/08916152.2014.915271.
   Web of Science ®Google Scholar
• P. Murugesan, K. Mayilsamy, S. Suresh, and H. Transfer, “Friction factor studies in a circular tube fitted with twisted tape consisting of wire-nails,” Chin. J. Chem. Eng., vol. 18, pp. 1038–1042, 2010. DOI: 10.1016/S1004-9541(09)60166-X.
   Web of Science ®Google Scholar
• K. Wongcharee and S. Eiamsa-Ard, “Friction and heat transfer characteristics of laminar swirl flow through the round tubes inserted with alternate clockwise and counter-clockwise twisted-tapes,” Int. Commun. Heat Mass. Transfer., vol. 38, pp. 348–352, 2011. DOI: 10.1016/j.icheatmasstransfer.2010.12.007.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard, C. Thianpong, P. Eiamsa-Ard, and P. Promvonge, “Thermal characteristics in a heat exchanger tube fitted with dual twisted tape elements in tandem,” Int. Commun. Heat Mass. Transfer., vol. 37, pp. 39–46, 01 January 2010. DOI: 10.1016/j.icheatmasstransfer.2009.08.010.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard, C. Thianpong, and P. Promvonge, “Experimental investigation of heat transfer and flow friction in a circular tube fitted with regularly spaced twisted tape elements,” Int. Commun. Heat Mass. Transfer., vol. 33, pp. 1225–1233, 2006. DOI: 10.1016/j.icheatmasstransfer.2006.08.002.
   Web of Science ®Google Scholar
• S. N. Sarada, A. S. R. Raju, K. K. Radha, and L. S. Sunder, “Enhancement of heat transfer using varying width twisted tape inserts,” Int. J. Eng. Sci. Technol., vol. 2, 2010, pp. 107–118.
   Google Scholar
• S. Eiamsa-Ard, “Study on thermal and fluid flow characteristics in turbulent channel flows with multiple twisted tape vortex generators,” Int. Commun. Heat Mass. Transfer, vol. 37, pp. 644–651, 2010. DOI: 10.1016/j.icheatmasstransfer.2010.02.004.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard, K. Nanan, K. Wongcharee, K. Yongsiri, and C. Thianpong, “Thermohydraulic performance of heat exchanger tube equipped with single-, double-, and triple-helical twisted tapes,” Chem. Eng. Commun., vol. 202, pp. 606–615, 2014. DOI: 10.1080/00986445.2013.858038.
   Web of Science ®Google Scholar
• C. Vashistha, A. K. Patil, and M. Kumar, “Experimental investigation of heat transfer and pressure drop in a circular tube with multiple inserts,” Appl. Thermal Eng., vol. 96, pp. 117–129, 2016. DOI: 10.1016/j.applthermaleng.2015.11.077.
   Web of Science ®Google Scholar
• M. M. K. Bhuiya, A. K. Azad, M. S. U. Chowdhury, and M. Saha, “Heat transfer augmentation in a circular tube with perforated double counter twisted tape inserts,” Int. Commun. Heat Mass. Transfer., vol. 74, pp. 18–26, 2016. DOI: 10.1016/j.icheatmasstransfer.2016.03.001.
   Web of Science ®Google Scholar
• M. M. K. Bhuiya, M. S. U. Chowdhury, M. Saha, and M. T. Islam, “Heat transfer and friction factor characteristics in turbulent flow through a tube fitted with perforated twisted tape inserts,” Int. Commun. Heat Mass. Transfer., vol. 46, pp. 49–57, 2013. DOI: 10.1016/j.icheatmasstransfer.2013.05.012.
   Web of Science ®Google Scholar
• C. Thianpong, P. Eiamsa-Ard, and S. Eiamsa-Ard, “Heat transfer and thermal performance characteristics of heat exchanger tube fitted with perforated twisted-tapes,” Heat Mass. Transfer, vol. 48, pp. 881–892, 2011. DOI: 10.1007/s00231-011-0943-0.
   Web of Science ®Google Scholar
• S. Gunes and E. Karakaya, “Thermal characteristics in a tube with loose-fit perforated twisted tapes,” Heat Transfer Eng., vol. 36, pp. 1504–1517, 2015. DOI: 10.1080/01457632.2015.1024985.
   Web of Science ®Google Scholar
• S. R. Shabanian, M. Rahimi, M. Shahhosseini, and A. A. Alsairafi, “CFD and experimental studies on heat transfer enhancement in an air cooler equipped with different tube inserts,” Int. Commun. Heat Mass. Transfer., vol. 38, pp. 383–390, 2011. DOI: 10.1016/j.icheatmasstransfer.2010.12.015.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard and P. Promvonge, “Thermal characteristics in round tube fitted with serrated twisted tape,” Appl. Thermal Eng., vol. 30, pp. 1673–1682, 2010. DOI: 10.1016/j.applthermaleng.2010.03.026.
   Web of Science ®Google Scholar
• V. Kongkaitpaiboon, K. Nanan, and S. Eiamsa-Ard, “Experimental investigation of heat transfer and turbulent flow friction in a tube fitted with perforated conical-rings,” Int. Commun. Heat Mass. Transfer., vol. 37, pp. 560–567, 2010. DOI: 10.1016/j.icheatmasstransfer.2009.12.015.
   Web of Science ®Google Scholar
• C. Thianpong, P. Eiamsa-Ard, P. Promvonge, and S. Eiamsa-Ard, “Effect of perforated twisted-tapes with parallel wings on heat tansfer enhancement in a heat exchanger tube,” Energy Procedia., vol. 14, pp. 1117–1123, 2012. DOI: 10.1016/j.egypro.2011.12.1064.
   Google Scholar
• K. Nanan, C. Thianpong, P. Promvonge, and S. Eiamsa-Ard, “Investigation of heat transfer enhancement by perforated helical twisted-tapes,” Int. Commun. Heat Mass. Transfer., vol. 52, pp. 106–112, 2014. DOI: 10.1016/j.icheatmasstransfer.2014.01.018.
   Web of Science ®Google Scholar
• X. Zhang, Z. Liu, and W. Liu, “Numerical studies on heat transfer and flow characteristics for laminar flow in a tube with multiple regularly spaced twisted tapes,” Int. J. Thermal Sci., vol. 58, pp. 157–167, 2012. DOI: 10.1016/j.ijthermalsci.2012.02.025.
   Web of Science ®Google Scholar
• J. Guo, A. Fan, X. Zhang, and W. Liu, “A numerical study on heat transfer and friction factor characteristics of laminar flow in a circular tube fitted with center-cleared twisted tape,” Int. J. Thermal Sci., vol. 50, pp. 1263–1270, 2011. DOI: 10.1016/j.ijthermalsci.2011.02.010.
   Web of Science ®Google Scholar
• S. Tamna, Y. Kaewkohkiat, S. Skullong, and P. Promvonge, “Heat transfer enhancement in tubular heat exchanger with double V-ribbed twisted-tapes,” Case Stud. Thermal Eng., vol. 7, pp. 14–24, 2016. DOI: 10.1016/j.csite.2016.01.002.
   Web of Science ®Google Scholar
• S. Skullong, P. Promvonge, C. Thianpong, and M. Pimsarn, “Heat transfer and turbulent flow friction in a round tube with staggered-winglet perforated-tapes,” Int. J. Heat Mass Transfer., vol. 95, pp. 230–242, 2016. DOI: 10.1016/j.ijheatmasstransfer.2015.12.007.
   Web of Science ®Google Scholar
• S. W. Chang, T. L. Yang, and J. S. Liou, “Heat transfer and pressure drop in tube with broken twisted tape insert,” Exp. Thermal Fluid Sci., vol. 32, pp. 489–501, 2007. DOI: 10.1016/j.expthermflusci.2007.06.002.
   Web of Science ®Google Scholar
• J. U. Ahamed, et al., “Enhancement and prediction of heat transfer rate in turbulent flow through tube with perforated twisted tape inserts: a new correlation,” J. Heat Transfer., vol. 133, pp. 041903-041903, 2011. DOI: 10.1115/1.4002635.
   Web of Science ®Google Scholar
• P. Murugesan, K. Mayilsamy, S. Suresh, and P. S. S. Srinivasan, “Heat transfer and pressure drop characteristics in a circular tube fitted with and without V-cut twisted tape insert,” Int. Commun. Heat Mass. Transfer., vol. 38, pp. 329–334, 2011. DOI: 10.1016/j.icheatmasstransfer.2010.11.010.
   Web of Science ®Google Scholar
• M. Rahimi, S. R. Shabanian, and A. A. Alsairafi, “Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape inserts,” Chem. Eng. Processing: Intensification, vol. 48, pp. 762–770, 2009. DOI: 10.1016/j.cep.2008.09.007.
   Web of Science ®Google Scholar
• H. S. Dizaji and S. Jafarmadar, “Experiments on new arrangements of convex and concave corrugated tubes through a double-pipe heat exchanger,” Exp. Heat Transfer., vol. 29, pp. 577–592, 2015. DOI: 10.1080/08916152.2015.1046015.
   Web of Science ®Google Scholar
• M. A. Omara, “Heat Transfer Performance through a Flat Tube Using Rotary Helical Screw-tape Inserts,” Exp. Heat Transfer., vol. 29, pp. 691–706, 2015. DOI: 10.1080/08916152.2015.1086842.
   Web of Science ®Google Scholar
• P. Murugesan, K. Mayilsamy, and S. Suresh, “Heat transfer in a tube fitted with vertical and horizontal wing-cut twisted tapes,” Exp. Heat Transfer., vol. 25, pp. 30–47, 2012. DOI: 10.1080/08916152.2011.559567.
   Web of Science ®Google Scholar
• E. Nourafkan, G. Karimi, and J. Moradgholi, “Experimental study of laminar convective heat transfer and pressure drop of cuprous oxide/water nanofluid inside a circular tube,” Exp. Heat Transfer., vol. 28, pp. 58–68, Jan. 02, 2015. DOI: 10.1080/08916152.2013.803178.
   Web of Science ®Google Scholar
• D. MageshBabu, P. K. Nagarajan, R. Sathyamurthy, and S. S. J. Krishnan, “Enhancing the thermal performance of AL2O3/DI water nanofluids in micro-fin tube equipped with straight and left-right twisted tapes in turbulent flow regime,” Exp. Heat Transfer., vol. 30, pp. 267–283, 2016. DOI: 10.1080/08916152.2016.1238857.
   Web of Science ®Google Scholar
• M. Mirzaei, A. Azimi, and H. Transfer, “Pressure drop characteristics of graphene oxide/water nanofluid in a circular tube fitted with wire coil insert,” Exp. Heat Transfer, vol. 29, pp. 173–187, 2015. DOI: 10.1080/08916152.2014.973975.
   Web of Science ®Google Scholar
• S. K. Saha, A. Dutta, and S. K. Dhal, “Friction and heat transfer characteristics of laminar swirl flow through a circular tube fitted with regularly spaced twisted-tape elements,” Int. J. Heat Mass Transfer., vol. 44, pp. 4211–4223, 2001. DOI: 10.1016/S0017-9310(01)00077-1.
   Web of Science ®Google Scholar
• P. Sivashanmugam and S. Suresh, “Experimental studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with helical screw-tape inserts,” Appl. Thermal Eng., vol. 26, pp. 1990–1997, 2006. DOI: 10.1016/j.applthermaleng.2006.01.008.
   Web of Science ®Google Scholar
• P. Sivashanmugam and P. K. Nagarajan, “Studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with right and left helical screw-tape inserts,” Exp. Thermal Fluid Sci., vol. 32, pp. 192–197, Oct. 01, 2007. DOI: 10.1016/j.expthermflusci.2007.03.005.
   Web of Science ®Google Scholar