Investigation of thermal and hydrodynamic performance of impingement jets solar air passage with protrusion with combination arc obstacle on the heated plate

References

• A. Kumar and M. H. Kim. Thermal hydraulic performance in a solar air heater channel with multi V-type perforated baffles. Energies, vol. 9, pp. 554, 2016.
   Web of Science ®Google Scholar
• A. Kumar, R. P. Saini, and J. S. Saini. An experimental investigation of enhanced heat transfer due to a gap in a continuous multiple V-rib arrangement in a solar air channel. J Enhanced Heat Transfer., vol. 21, pp. 21–49, 2014.
   Web of Science ®Google Scholar
• G. Murali and K. Mayilsamy. Spiral phase-change material for enhancing natural circulation solar water heater: an experimental study. Exp Heat Transfer., vol. 30, pp. 151–161, 2016.
   Web of Science ®Google Scholar
• A. Sharma and G. Bharadwaj. Varun, Heat transfer and friction factor correlation development for double pass solar air heater having V-shaped ribs as roughness elements. Exp Heat Transfer., vol. 30, pp. 77–90, 2017.
   Web of Science ®Google Scholar
• A. Kumar, R. P. Saini, and J. S. Saini. Numerical simulation of the thermal performance of a solar air channel having discrete multi v-rib roughness on the absorber plate. Heat Transfer Res., vol. 47, pp. 449–469, 2016.
   Web of Science ®Google Scholar
• S. Kumar, A. D. Kothiyal, M. S. H. Bisht, and A. Kumar. Turbulent heat transfer and nanofluid flow in a protruded ribbed square passage. Results Phys., vol. 7, pp. 3603–3618, 2017.
   Web of Science ®Google Scholar
• A. Kumar, et al. Single phase thermal and hydraulic performance analysis of a V-pattern dimpled obstacles air passage. Exp Heat Transfer., vol. 30, pp. 393–426, 2017.
   Web of Science ®Google Scholar
• R. Kumar, R. Chauhan, M. Sethi, and A. Kumar. Experimental study and correlation development for Nusselt number and friction factor for discretized broken V-pattern baffle solar air channel. Exp. Thermal Fluid Sci., vol. 31, pp. 56–75, 2017.
   Web of Science ®Google Scholar
• A. Kumar and M. H. Kim. Mathematical simulation on thermal performance of packed bed solar energy storage system. Trans Korean Hydrogen New Energy Soci., vol. 26, pp. 331–338, 2015.
   Google Scholar
• R. K. Ravi and R. P. Saini. Effect of roughness elements on thermal and thermo hydraulic performance of double pass solar air heater duct having discrete multi V-shaped and staggered rib roughness on both sides of the absorber plate. Exp Heat Transfer., 31(1), pp. 47–67, 2018.
   Web of Science ®Google Scholar
• R. Thakur, A. R. S. Suri, S. Kumar, and A. Kumar. A Review of integrated renewable energy system in power generation. Int. J. Mech Prod Eng. Res. Dev., vol. 3, pp. 79–88, 2013.
   Google Scholar
• M. Roger, R. Buck, and H. M. Steinhagen. Numerical and experimental investigation of a multiple air jet cooling system for application in a solar thermal receiver. ASME J Heat Transfer., vol. 127, pp. 863–876, 2005.
   Web of Science ®Google Scholar
• J. C. Han. Recent studies in turbine blade cooling. Int. J. Rotat Mach., vol. 10, pp. 443–457, 2004.
   Google Scholar
• K. S. Myung and M. Issam. Experimental and numerical investigation of single phase heat transfer using a hybrid jet impingement/micro channel cooling scheme. Int J Heat Mass Transf., vol. 49, pp. 682–694, 2006.
   Web of Science ®Google Scholar
• A. Kumar, R. P. Saini, and J. S. Saini. Experimental investigations on thermo-hydraulic performance due to flow-attack-angle in multiple V-ribs with gap in a rectangular duct of solar air heaters. J Sustainable Energy Environ., vol. 4, pp. 1–7, 2013.
   Google Scholar
• A. Kumar and M. H. Kim. CFD analysis on the thermal hydraulic performance of an SAH duct with multi V-shape roughened ribs. Energies., vol. 9, pp. 415, 2016.
   Web of Science ®Google Scholar
• K. P. Perry, Heat transfer by convection from a hot gas jet to a plane surface, Proceedings of the Institution of Mechanical Engineering, 168 (1954) 775
   Google Scholar
• N. Zuckerman and N. Lior. Jet impingement heat transfer: physics, correlations and numerical modelling. Adv Heat Transfer., vol. 39, pp. 565–631, 2006.
   Google Scholar
• D. M. Kercher and W. Tabakoff. Heat transfer by a square array of round air jets impinging perpendicular to a flat surface including the effect of spent air. ASME J. Eng. Power., vol. 92, pp. 73–82, 1970.
   Google Scholar
• N. K. Bansal. Solar air heater applications in India. Renewable Energy., vol. 16, pp. 618–623, 1999.
   Web of Science ®Google Scholar
• A. Kumar, et al. Developing heat transfer and pressure loss in an air passage with multi discrete V-blockages. Exp. Thermal Fluid Sci., vol. 84, pp. 266–278, 2017.
   Web of Science ®Google Scholar
• M. Belusko, W. Saman, and F. Bruno. Performance of jet impingement in unglazed air collectors. Solar Energy., vol. 82, pp. 389–398, 2008.
   Web of Science ®Google Scholar
• J. Mustafa, S. Husain, and M. A. Siddiqui. Experimental studies on natural convection of water in a closed loop vertical annulus. Exp Heat Transfer., vol. 30, pp. 25–45, 2017.
   Web of Science ®Google Scholar
• R. S. Gill, V. S. Hans, J. S. Saini, and S. Singh. Investigation on performance enhancement due to staggered piece in a broken arc obstacle roughened solar air heater duct. Renewable Energy., vol. 104, pp. 148–162, 2017.
   Web of Science ®Google Scholar
• M. K. Sahu and R. K. Prasad. Thermo hydrodynamic performance analysis of an arc shape wire roughened solar air heater. Renewable Energy., vol. 96, pp. 233–243, 2016.
   Web of Science ®Google Scholar
• R. Chauhan and N. S. Thakur. Heat transfer and friction factor correlations for impinging jet solar air heater. Exp. Thermal Fluid Sci., vol. 44, pp. 760–767, 2013.
   Web of Science ®Google Scholar
• J. Lee, et al. Cross-flow effects on impingement array heat transfer with varying jet-to-target plate distance and hole spacing. Int J Heat Mass Transf., vol. 75, pp. 534–544, 2014.
   Web of Science ®Google Scholar
• A. Chatterjee and L. J. Deviprasath. Heat transfer in confined laminar axisymmetric impinging jets at small nozzle-plate distances: the role of upstream vorticity diffusion. Numer. Heat Transfer . Appl., vol. 39, pp. 777–800, 2001.
   Web of Science ®Google Scholar
• Tawfek. Heat transfer due to a round jet impinging normal to a circular cylinder. Heat Mass. Transfer., vol. 35, pp. 327–333, 1999.
   Web of Science ®Google Scholar
• A. Bekele, M. Mishra, and S. Dutta. Performance characteristics of solar air heater with surface mounted obstacles. Energy Convers Manage., vol. 85, pp. 603–611, 2014.
   Web of Science ®Google Scholar
• D. Jin, M. Zhang, P. Wang, and S. Xu. Numerical investigation of heat transfer and fluid flow in a solar air heater duct with multi V-shaped obstacles on the absorber plate. Energy., vol. 89, pp. 1–1106, 2015.
   Web of Science ®Google Scholar
• S. M. Kim and K. Y. Kim. Evaluation of cooling performance of impinging jet array over various dimpled surfaces. Heat Mass Transfer, 52(4), pp. 845–854, 2015.
   Web of Science ®Google Scholar
• R. Maithani and J. S. Saini. Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with V-obstacles with symmetrical gaps. Exp. Thermal Fluid Sci., vol. 70, pp. 220–227, 2016.
   Web of Science ®Google Scholar
• S. W. Chang, L. M. Su, and Y. Zheng. Reciprocating impingement jet heat transfer with surface obstacles. Exp Heat Transfer., vol. 13, pp. 275–297, 2000.
   Web of Science ®Google Scholar
• M. Goodro, J. Park, P. Ligrani, M. Fox, and H. K. Moon. Effects of Mach number and Reynolds number on jet array impingement heat transfer. Int J Heat Mass Transf., vol. 50, pp. 367–380, 2007.
   Web of Science ®Google Scholar
• E. A. Handoyo, D. Ichsani, and S. Prabowo. Numerical studies on the effect of delta-shaped obstacles’ spacing on the heat transfer and pressure drop in v-corrugated channel of solar air heater. Solar Energy., vol. 131, pp. 47–60, 2016.
   Web of Science ®Google Scholar
• N. K. Pandey and V. K. Bajpai. Varun, Experimental investigation of heat transfer augmentation using multiple arcs with gap on absorber plate of solar air heater. Solar Energy., vol. 134, pp. 314–326, 2016.
   Web of Science ®Google Scholar
• I. V. Shevchuk, N. Saniei, and X. T. Yan. Impingement heat transfer over a rotating disk: integral method. J Thermo Phys Heat Transfer., vol. 17, pp. 291–293, 2003.
   Web of Science ®Google Scholar
• D. R. Graminho and M. J. De Lemos. Laminar confined impinging jet into a porous layer. Numer. Heat Transfer. Appl., vol. 54, pp. 151–177, 2008.
   Web of Science ®Google Scholar
• ASHRAE, Standard, 93–97. Method of Testing to Determine the Thermal Performance of Solar. New York: Refrigeration and Air Conditioning Engineering, 1977.
   Google Scholar
• A. R. S. Suri, A. Kumar, and R. Maithani. Heat transfer enhancement of heat exchanger tube with multiple square perforated twisted tape inserts: experimental investigation and correlation development. Chem. Eng. Process Intensification., vol. 116, pp. 76–96, 2017.
   Web of Science ®Google Scholar
• M. Sethi and N. S. Thakur. Heat transfer and friction characteristics of dimple shaped roughness element arranged in angular fashion on the absorber plate of solar air heater. J Renewable Sustainable Energy., vol. 4, pp. 023112, 2012.
   Web of Science ®Google Scholar
• R. Kumar, A. Kumar, R. Chauhan, and M. Sethi. Heat transfer enhancement in solar air channel with broken multiple V-type baffle. Case Stud. Thermal Eng., vol. 8, pp. 187–197, 2016.
   Web of Science ®Google Scholar
• S. J. Klein and A. M. Clintock. The description of uncertainties in a single sample experiments. Mech Eng., vol. 75, pp. 3–8, 1953.
   Google Scholar
• M. J. Lewis. Optimizing the thermo hydrodynamic performance of rough surfaces. Int. J. Heat Mass. Transfer., vol. 515, no. 18, pp. 1243–1248, 1975.
   Google Scholar