References
- A. Moosavi, M. Abbasalizadeh, and H. S. Dizaji, “Optimization of heat transfer and pressure drop characteristics via air bubble injection inside a shell and coiled tube heat exchanger,” Exp. Thermal and Fluid Sci., vol. 78, pp. 1–9, 2016. DOI: 10.1016/j.expthermflusci.2016.05.011.
- J. B. B. Rao and V. R. Raju, “Numerical and heat transfer analysis of shell and tube heat exchanger with circular and elliptical tubes,” Int. J. Of Mechanical and Materials Eng., vol. 11, pp. 1–18, 2016. DOI: 10.1186/s40712-016-0059-x.
- Z. He, X. Fang, Z. Zhang, and X. Gao, “Numerical investigation on performance comparison of non – newtonian fluid flow in vertical heat exchangers combined helical baffle with elliptic and circular tubes,” Applied Thermal Eng., vol. 100, pp. 84–97, 2016. DOI: 10.1016/j.applthermaleng.2016.02.033.
- J. –. F. Yang, M. Zeng, and Q. –. W. Wang, “Numerical investigation on shell – side performances of combined parallel and serial two shell – pass shell – and – tube heat exchangers with continuous helical baffles,” Appl. Energy., vol. 139, pp. 163–174, 2015. DOI: 10.1016/j.apenergy.2014.11.029.
- P. Promvonge, S. Tamna, M. Pimsarn, and C. Thianpong, “Thermal characterization in a circular tube fitted with inclined horseshoe baffles,” Applied Thermal Eng., vol. 75, pp. 1147–1155, 2015. DOI: 10.1016/j.applthermaleng.2014.10.045.
- G. Yakar and R. Karabacak, “Investigation of thermal performance of perforated finned heat exchangers,” Exp. Heat Transfer., vol. 28, pp. 354–365, 2015. DOI: 10.1080/08916152.2014.887159.
- D. Pahani, “Evaluation of nusselt number and effectiveness for a vertical shell – coiled tube heat exchanger with air bubble injection into shell side,” Exp. Heat Transfer., vol. 30, pp. 179–191, 2017. DOI: 10.1080/08916152.2016.1233145.
- N. Budak, H. L. Yucel, and Z. Argunhan, “Experimental and numerical investigation of the effect of turbulator on heat transfer in a concentric – type heat exchanger,” Exp. Heat Transfer., vol. 29, pp. 322–336, 2016. DOI: 10.1080/08916152.2014.976723.
- A. E. Zohir, A. A. AbdelAziz, and M. A. Habib, “Heat transfer characteristics and pressure drop of the concentric tube equipped with coiled wires for pulsating turbulent flow,” Exp. Thermal and Fluid Sci., vol. 65, pp. 41–51, 2015. DOI: 10.1016/j.expthermflusci.2015.03.003.
- J.D. Patil and B. S. Gawali, “Experimental Study of Heat Transfer Characteristics in Oscillating Fluid Flow in Tube,” Exp. Heat Transfer., vol. 30, pp. 328–340, 2017. DOI: 10.1080/08916152.2016.1258018.
- J. I. Jia–dong, G. E. Pei–qi and B. I. Wen–bo, “Numerical investigation of flow and heat transfer performances of horizontal spiral – coil pipes,” J. Hydrodynamics., vol. 28, pp. 576–584, 2016. DOI: 10.1016/S1001-6058(16)60661-3.
- A. Swain and M. K. Das, “Convective heat transfer and pressure drop over elliptical and smooth tube,” Heat Transf. – Asian Res., vol. 45, pp. 462–481, 2016. DOI: 10.1002/htj.21172.
- M. R. Salimpour and A. Dehshiri-Parizi “Convective heat transfer of nanofluid flow through conduits with different cross – sectional shapes,” J. Mechanical Sci. Technol., vol. 29, pp. 707–713, 2015. DOI: 10.1007/s12206-015-0130-1.
- H. E. Ahmed, M. I. Ahmed, and M. Z. Yusoff, “Heat transfer enhancement in a triangular duct using compound nanofluids and turbulators,” Applied Thermal Eng., vol. 91, pp. 191–201, 2015. DOI: 10.1016/j.applthermaleng.2015.07.061.
- M. Khoshvaght-Aliabadi, A. Zanganeh, M. H. Akbari and M. Eskandari, “Experimental investigation on thermal – hydraulic characteristics of a tube equipped with modified vortex – generator inserts,” Exp. Heat Transfer., vol. 30, pp. 11–24, 2017. DOI: 10.1080/08916152.2015.1135201.
- Y. A. Çengel, Heat and Mass Transfer: A Practical Approach, 3rd ed. New York, USA: McGraw – Hill, 2006.