An experimental study on convective heat transfer performance of steam and air flow in V-shaped rib roughened channels

References

• J. C. Han, “Heat transfer and friction in channels with two opposite Rib-roughened walls,” ASME J. Heat Transfer, vol. 106, pp. 774–781, 1984. DOI: 10.1115/1.3246751.
   Web of Science ®Google Scholar
• J. C. Han, “Heat transfer and friction characteristics in rectangular channels with Rib turbulators,” ASME J. Heat Transfer, vol. 110, pp. 321~328, 1988. DOI: 10.1115/1.3250487.
   Web of Science ®Google Scholar
• J. C. Han, Y. M. Zhang, and C. Lee, “Augmented heat transfer in square channels with parallel,” Crossed, V-Shaped Ribs ASME J. Heat Transfer, vol. 113, pp. 590–596, 1991. DOI: 10.1115/1.2910606.
   Web of Science ®Google Scholar
• S. V. Ekkad and J. C. Han, “Local heat transfer measurements near a sharp 180º turn of a two-pass smooth square channel with a transient liquid crystal image technique,” J. Flow. Visualization. Image Process., vol. 2, pp. 285~297, 1995. DOI: 10.1615/JFlowVisImageProc.v2.i3.80.
   Google Scholar
• X. Gao and B. Sunden, “Heat transfer distribution in rectangular ducts with V-shaped ribs,” Heat Mass. Transfer, vol. 37, pp. 315–320, 2001. DOI: 10.1007/s002310000148.
   Web of Science ®Google Scholar
• W. L. Fu, L. M. Wright, and J. C. Han, “Heat transfer in two-pass rotating rectangular channels (AR=1.2 and AR=1.4) with 45°Angled Rib Turbulators,” Proceedings of ASME Turbo Expo 2004, June 14-17, 2004, Vienna, Austria, GT2004–53261, 2004.
   Google Scholar
• D. H. Lee, D. H. Rhee, K. M. Kim, H. H. Cho, and H. K. Moon, “Detailed measurement of heat/mass transfer with continuous and multiple V-shaped ribs in rectangular channel,” Energy, vol. 34, pp. 1770–1778, 2009. DOI: 10.1016/j.energy.2009.07.011.
   Web of Science ®Google Scholar
• H. Zhang; et al., “A simplified approach to design transverse ribs which array alternately in rectangular channel,”Proceedings of ASME Turbo Expo 2010, June 14-18, 2010, Glasgow, UK, GT2010–22562, 2010.
   Google Scholar
• R. Sebastian; et al., “Heat transfer and pressure drop measurements in channels roughened by variously shaped ribs on one wall,” Exp. Heat Transfer, vol. 31, no. 4, pp. 334–354, 2017.
   Web of Science ®Google Scholar
• J. C. Corman, (1995) H gas turbine combined cycle power generation system for the future, Proceedings of the yokohama gas turbine congress. IGTC-paper-143.
   Google Scholar
• B. Facchini, L. Innocentiand, and E. Carnevale (2001) Comparison of different blade cooling solutions to improve cooling efficiency and gas turbine performances, Proceedings of ASME Turbo Expo 2001, June 4-7, New Orleans, Louisiana, 2001-GT-0571.
   Google Scholar
• B. Facchini; et al., “Blade cooling improvement for heavy duty gas turbine: the air coolant temperature reduction and the introduction of steam and mixed steam/air cooling,” Int. J. Thermal Sci., vol. 39, no. 1, pp. 74~84,2000, DOI:10.1016/S1290-0729(00)00194-X.
   Web of Science ®Google Scholar
• Y. S. H. Najjar, A. S. Alghamdi, and M. H. Al-Beirutty, “Comparative performance of combined gas turbine systems under three different blade cooling schemes,” Appl. Thermal. Eng., vol. 24, pp. 1919–1934, 2004. DOI: 10.1016/j.applthermaleng.2003.12.002.
   Web of Science ®Google Scholar
• D. Bohn et al. (2002) Experimental and numerical investigation of a steam-cooled vane, Proceedings of ASME Turbo Expo, Amsterdam, The Netherlands, GT2002–30210.
   Google Scholar
• D. Bohn, J. Ren, and K. Kusterer (2005) Cooling performance of the steam-cooled vane in A steam turbine cascade, Proceeding of ASME Turbo Expo, Reno Tahoe, Nevada, USA, GT2005–68148.
   Google Scholar
• J. Z. Liu, J. M. Gao, and T. Y. Gao, “Heat transfer characteristics in steam cooled rectangular channels with two opposite rib-roughened walls,” Appl. Thermal. Eng., vol. 50, pp. 104–111, 2013. DOI: 10.1016/j.applthermaleng.2012.05.003.
   Web of Science ®Google Scholar
• L. Q. Shui, J. M. Gao, and X. J. Shi, “Effects of duct aspect ratio on heat transfer and friction in steam-cooled ducts with 60-angled rib turbulators,” Exp. Thermal Fluid Sci., vol. 49, pp. 123–134, 2013. DOI: 10.1016/j.expthermflusci.2013.04.010.
   Web of Science ®Google Scholar
• L. Q. Shui, et al. (2010) Numerical investigation of heat transfer and flow characteristics in a steam-cooled square ribbed duct. Proceedings of ASME Turbo Expo, Glasgow, UK, GT 2010–22407.
   Google Scholar
• W. Wang and J. M. Gao, “Flow and heat transfer characteristics in rotating two-pass channels cooled by superheated steam,” Chin. J. Aeronautics, vol. 25, pp. 524–532, 2012. DOI: 10.1016/S1000-9361(11)60416-0.
   Web of Science ®Google Scholar
• C. Ma; et al., “An experimental investigation of heat transfer characteristics for steam cooling in a rectangular channel with parallel Ribs,” J. Thermal Sci., vol. 5, pp. 454–464, 2014, DOI: 10.1007/s11630-014-0729-z.
   Google Scholar
• T. Hiyama; et al., “Development of the 1600ºC J class gas turbines operating experience of M501J gas turbine (60Hz),” Acgt, vol. 2014, no. ACGT, pp. 2014–2124, 2014.
   Google Scholar
• W. D. Shen, Z. M. Jiang, and J. G. Tong, Engineering Thermodynamics, the Third. Beijing: Higher Education Press, 2001.
   Google Scholar
• J. L. Kline and F. A. Mcclintock, “Describing uncertainties in single-sample experiments,” Mechanical Eng., vol. 75, pp. 3–8, 1953.
   Google Scholar
• Y. Rao, C. Y. Wan, and S. S. Zang (2009) An experimental study of transitional flow friction and heat transfer performance of a channel with staggered arrays of mini-scale short pin fins. In Proceedings of ASME Turbo Expo, Orlando, USA, GT2009–59341.
   Google Scholar
• W. Peng; et al., “Experimental and numerical investigation of convection heat transfer in channels with different types of ribs,” Appl. Thermal. Eng., vol. 31, pp. 2702–2708, 2011, DOI: 10.1016/j.applthermaleng.2011.04.040.
   Web of Science ®Google Scholar
• G. N. Xie; et al., “A numerical study of flow structure and heat transfer in a square channel with ribs combined downstream half-size or same-size ribs,” Appl. Thermal. Eng., vol. 61, pp. 289–300, 2013, DOI: 10.1016/j.applthermaleng.2013.07.054.
   Web of Science ®Google Scholar
• G. Tanda, “Heat transfer in rectangular channels with transverse and V-shaped broken ribs,” Int. J. Heat Mass. Transf, vol. 47, no. 2, pp. 229–243, 2004. DOI:10.1016/S0017-9310(03)00414-9.
   Web of Science ®Google Scholar
• P. Singh and S. V. Ekkad (2017) Experimental investigation of rotating Rib roughened two-pass square duct with different channel orientations. Proceedings of ASME Turbo Expo 2017, Charlotte, NC, USA, GT2017–64225.
   Google Scholar
• S. V. Karmare and A. N. Tikekar, “Heat transfer and friction factor correlation for artificially roughened duct with metal grit ribs,” Int. J. Heat Mass. Transf, vol. 50, pp. 4342–4351, 2007. DOI: 10.1016/j.ijheatmasstransfer.2007.01.065.
   Web of Science ®Google Scholar
• A. E. Momin, J. S. Saini, and S. C. Solanki, “Heat transfer and friction in solar air heater duct with V-shaped rib roughness on absorber plate,” Int. J. Heat Mass. Transf, vol. 45, pp. 3383–3396, 2002. DOI: 10.1016/S0017-9310(02)00046-7.
   Web of Science ®Google Scholar
• S. Singh, S. Chander, and J. S. Saini, “Heat transfer and friction factor correlations of solar air heater ducts artificially roughened with discrete V-down ribs,” Energy, vol. 36, pp. 5053–5064, 2011. DOI: 10.1016/j.energy.2011.05.052.
   Web of Science ®Google Scholar