Heat transfer and friction factor characteristic of spherical and inclined teardrop dimple channel subjected to forced convection

References

• V. N. Afanasyev, Y. P. Chudnovsky, A. I. Leontiev, and P. S. Roganov, “Turbulent flow friction and heat transfer characteristics for spherical cavities on a flat plate,” Exp. Thermal Fluid Sci., vol. 7, no. 1, pp.1–8, 1993. DOI: 10.1016/0894-1777(93)90075-T.
   Web of Science ®Google Scholar
• H. K. Moon, T. O’Connell, and B. Gletzer, “Channel height effect of heat transfer and friction in a dimpled passage,” ASME J. Eng. Gas Turbines Power, vol. 122, no. 2, pp.307–313, 2000. DOI: 10.1115/1.483208.
   Web of Science ®Google Scholar
• P. M. Ligrani, J. L. Harrison, G. I. Mahmood, and M. L. Hill, “Flow structure due to dimple depression on a channel surface,” Phys. Fluids, vol. 13, no. 11, pp.3442–3451, 2001. DOI: 10.1063/1.1404139.
   Web of Science ®Google Scholar
• G. I. Mahmood, et al., “Local heat transfer and flow structure on and above a dimpled surface in a Channel,” ASME J. Turbomach., vol. 123, no. 1, pp.115–123, 2001. DOI: 10.1115/1.1333694.
   Web of Science ®Google Scholar
• S. A. Isaev and A. I. Leontiev, “Numerical simulation of vortex enhancement of heat transfer under conditions of turbulent flow past a spherical dimple on the wall of a narrow channel,” High Temp., vol. 41, no. 5, pp.665–679, 2003. DOI: 10.1023/A:1026100913269.
   Web of Science ®Google Scholar
• R. S. Bunker and K. F. Donnellan, “Heat transfer and friction factors for flows inside circular tubes with concavity surfaces,” ASME J. Turbomach., vol. 125, no. 4, pp.665–672, 2003. DOI: 10.1115/1.1622713.
   Web of Science ®Google Scholar
• G. I. Mahmood and P. M. Ligrani, “Heat transfer in a dimpled channel: combined influences of aspect ratio, temperature ratio, reynolds number, and flow structure,” Int. J. Heat Mass Transf., vol. 45, no. 10, pp.2011–2020, 2002. DOI: 10.1016/S0017-9310(01)00314-3.
   Web of Science ®Google Scholar
• P. M. Ligrani, N. K. Burgess, and S. Y. Won, “Nusselt numbers and flow structure on and above a shallow dimpled surface within a channel, including the effects of inlet turbulence intensity level,” J. Turbomach., vol. 127, pp. 321–330, 2005. DOI: 10.1115/1.1861913.
   Web of Science ®Google Scholar
• Y. L. Lin, T. I. P. Shih, and M. K. Chyu, “Computations of flow and heat transfer in a channel with rows of hemispherical cavities,” ASME paper No. 99-GT-263, ASME 44th Intl. Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, Indiana, U.S.A, 1999.
   Google Scholar
• A. I. Leontiev, N. A. Kiselev, S. A. Burtsev, M. M. Strongin, and Y. A. Vinogradov, “Experimental investigation of heat transfer and drag on surfaces with spherical dimples,” Exp. Thermal Fluid Sci., vol. 79, pp. 74–84, 2016. DOI: 10.1016/j.expthermflusci.2016.06.024.
   Web of Science ®Google Scholar
• J. Turnow, N. Kornav, N. Zhdanov, and E. Hassel, “Flow structures and heat transfer on dimples in a staggered arrangement,” Int. J. Heat Fluid Flow, vol. 35, pp. 168–175, 2012. DOI: 10.1016/j.ijheatfluidflow.2012.01.002.
   Web of Science ®Google Scholar
• N. K. Burgess and P. M. Ligrani, “Effects of dimple depth on channel Nusselt numbers and friction factors,” J. Heat. Transfer, vol. 127, no. 8, pp.839–847, 2005. DOI: 10.1115/1.1994880.
   Web of Science ®Google Scholar
• M. K. Chyu, Y. Yu, H. Ding, J. P. Downs, and F. Soechting, “Concavity enhanced heat transfer in an internal cooling passage,” ASME Paper No. 97-GT-437 ASME 42nd Intl. Gas Turbine and Aeroengine Congress and Exhibition, Orlando, Florida, U.S.A, 1997.
   Google Scholar
• J. Park and P. M. Ligrani, “Numerical predictions of heat transfer and fluid flow characteristics for even different dimpled surfaces in a channel,” Numer. Heat Transfer, Part A, vol. 47, pp. 209–232, 2005. DOI: 10.1080/10407780590886304.
   Web of Science ®Google Scholar
• Y. Rao, T. Feng, and B. Li, “Heat transfer of turbulent flow over surfaces with spherical dimples and teardrop dimples,” Exp. Thermal Fluid Sci., vol. 61, no. 2, pp.201–209, 2014. DOI: 10.1016/j.expthermflusci.2014.10.030.
   Google Scholar
• Y. Rao, T. Feng, B. Li, and B. Weigand, “Experimental and numerical study of heat transfer and flow friction in channels with dimples of different shapes,” ASME J. Heat Transfer, vol. 137, no. 3, pp.031901(1–10), 2015. DOI: 10.1115/1.4029036.
   PubMed Web of Science ®Google Scholar
• N. Katkhaw, et al. “The heat transfer behaviour of a flat plate having 45° ellipsoidal dimpled surfaces,” Case Stud. Thermal Eng., vol. 2, pp. 67–74, 2014. DOI: 10.1016/j.csite.2013.12.002.
   Google Scholar
• N. Vorayos and N. Katkhaw, “Heat transfer behaviour of a flat plate having spherical dimpled surfaces,” Case Stud. Thermal Eng., vol. 8, pp. 370–377, 2016. DOI: 10.1016/j.csite.2016.09.004.
   Web of Science ®Google Scholar
• C. N. Jordan and L. M. Wright, “Heat transfer enhancement in a rectangular (AR = 3:1) channel with v-shaped dimples,” presented at ASME paper No. GT2011-46128, Pro. of ASME Turbo Expo, Vancouver British Columbia, Canada, 2011.
   Google Scholar
• A. Kumar, R. Kumar, R. Chauhan, and R. Nadda, “Single phase thermal and hydraulic performance analysis of a V-pattern dimpled obstacles air passage,” Exp. Heat Transf., vol. 30, no. 5, pp.393–426, 2016. DOI: 10.1080/08916152.2016.1269139.
   Web of Science ®Google Scholar
• R. K. Ravi and R. P. Saini, “Effect of roughness elements on thermal and thermohydraulic performance of double pass solar air heater duct having discrete multi V-shaped and staggered rib roughness on both sides of the absorber plate,” Exp. Heat Transf., vol. 31, no. 1, pp.47–67, 2017. DOI: 10.1080/08916152.2017.1350217.
   Web of Science ®Google Scholar
• Y. Xie, H. Qu, and D. Zhang, “Numerical investigation of flow and heat transfer in a rectangular channel with teardrop dimple/protrusion,” Int. J. Heat Mass Transf., vol. 84, pp. 486–496, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.01.055.
   Web of Science ®Google Scholar
• T. M. Jeng, S. C. Tzeng, and Q. Y. Huang, “Heat transfer performance of the pin-fin heat sink filled with packed brass beads under a vertical oncoming flow,” Int. J. Heat Mass Transf., vol. 86, pp. 531–554, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.03.049.
   Web of Science ®Google Scholar
• O. B. Kanargi, P. S. Lee, and C. Yap, “A numerical and experimental investigation of heat transfer and fluid flow characteristics of a cross-connected alternating converging-diverging channel heat sink,” Int. J. Heat Mass Transf., vol. 106, pp. 449–464, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.08.057.
   Web of Science ®Google Scholar
• F. Kreith and S. M. Bohn, Principles of Heat Transfer, United States of America: Cengage Learning, 2011.
   Google Scholar
• S. J. Kline and F. A. McClintock, “Describing uncertainties in single sample experiments,” Mech. Eng., vol. 75, pp. 3–8, 1953.
   Google Scholar
• C. Park and C. Silva, “Study of laminar forced convection heat transfer for dimpled heat sinks,” J. Thermophys. Heat Transf., vol. 22, no. 2, pp.262–270, 2008. DOI: 10.2514/1.33497.
   Web of Science ®Google Scholar