Experimental investigation of heat transfer from different pin fin in a rectangular channel

References

• C. Falsetti, H. Jafarpoorchekab, M. Magnini, N. Borhani, and J. R. Thome, “Two-phase operational maps, pressure drop, and heat transfer for flow boiling of R236fa in a micro-pin fin evaporator,” Int. J. Heat. Mass. Transf., vol. 107, pp. 805–819, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.11.038.
   Web of Science ®Google Scholar
• M. Qian, D. Mei, Z. Yi, Y. Feng, and Z. Chen, “Fluid flow and heat transfer performance in a micro-reactor with non-uniform micro-pin-fin arrays for hydrogen production at low Reynolds number,” Int. J. Hydrogen. Energy., vol. 42, no. 1, pp.553–561, 2017. DOI: 10.1016/j.ijhydene.2016.10.150.
   Web of Science ®Google Scholar
• J. Zhao, S. Huang, L. Gong, and Z. Huang, “Numerical study and optimizing on micro square pin-fin heat sink for electronic cooling,” Appl. Therm. Eng., vol. 93, pp. 1347–1359, 2016. DOI: 10.1016/j.applthermaleng.2015.08.105.
   Web of Science ®Google Scholar
• M. Kim, Y. H. Man, and J. K. Min, “A numerical study on various pin-fin shaped surface air-oil heat exchangers for an aero gas-turbine engine,” Int. J. Heat. Mass. Transf., vol. 93, pp. 637–652, 2016. DOI: 10.1016/j.ijheatmasstransfer.2015.10.035.
   Web of Science ®Google Scholar
• D. Yang, et al., “Numerical and experimental analysis of cooling performance of single-phase array microchannel heat sinks with different pin-fin configurations,” Appl. Therm. Eng., vol. 112, pp. 1547–1556, 2017. DOI: 10.1016/j.applthermaleng.2016.08.211.
   Web of Science ®Google Scholar
• S. Ndao, Y. Peles, and M. K. Jensen, “Effects of pin fin shape and configuration on the single-phase heat transfer characteristics of jet impingement on micro pin fins,” Int. J. Heat. Mass. Transf., vol. 70, pp. 856–863, 2014. DOI: 10.1016/j.ijheatmasstransfer.2013.11.062.
   Web of Science ®Google Scholar
• I. Kotcioglu, S. Caliskan, and S. Baskaya, “Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin–fin arrays,” Heat Mass. Transfer, vol. 47, pp. 1133–1142, 2011. DOI: 10.1007/s00231-011-0779-7.
   Web of Science ®Google Scholar
• J. Hua, G. Li, X. Zhao, Q. Li, and J. Hu, “Study on the flow resistance performance of fluid cross various shapes of micro-scale pin fin,” Appl. Therm. Eng., vol. 107, pp. 768–775, 2016. DOI: 10.1016/j.applthermaleng.2016.07.048.
   Web of Science ®Google Scholar
• Q. Li, Z. Chen, U. Flechtner, and H.-J. Warnecke, “Heat transfer and pressure drop characteristics in rectangular channels with elliptic pin fins,” Int. J. Heat. Fluid. Flow., vol. 19, no. 3, pp.245–250, 1998. DOI: 10.1016/S0142-727X(98)00003-4.
   Web of Science ®Google Scholar
• K. Chyu, S. C. Siw, and H. K. Moon, Effects of Height-to-Diameter Ratio of Pin Element on Heat Transfer from Staggered Pin-Fin Arrays. ASME, Orland, FL, USA: June 8-12, 2009.
   Google Scholar
• K. A. Moores, J. Kim, and Y. K. Joshi, “Heat transfer and fluid flow in shrouded pin fin arrays with and without tip clearance,” Int. J. Heat. Mass. Transf., vol. 52, pp. 5978–5989, 2009. DOI: 10.1016/j.ijheatmasstransfer.2009.08.005.
   Web of Science ®Google Scholar
• A. Indi, S. V. Prabhu, and R. P. Vedula, “Local heat transfer distribution in a rectangular pin channel with and without vortex generators,” Exp. Heat. Transfer., vol. 24, pp. 34–58, 2011. DOI: 10.1080/08916151003628556.
   Web of Science ®Google Scholar
• M. Liu, D. Liu, S. Xu, and Y. Chen, “Experimental study on liquid flow and heat transfer in micro square pin fin heat sink,” Int. J. Heat. Mass. Transf., vol. 54, pp. 5602–5611, 2011. DOI: 10.1016/j.ijheatmasstransfer.2011.07.013.
   Web of Science ®Google Scholar
• N. Guan, G. Jiang, Z. G. Liu, and C. W. Zhang, “Effects of heating load on flow resistance and convective heat transfer in micro-pin-fin heat sinks with different cross-section shapes,” Exp. Heat. Transfer., vol. 29, pp. 673–690, 2016. DOI: 10.1080/08916152.2015.1086841.
   Web of Science ®Google Scholar
• S. Caliskan, Experimental and numerical investigation of heat transfer from rib-roughened surfaces with different impinging jets, PhD thesis, Gazi University, Ankara, Turkey, 2012.
   Google Scholar
• L. P. B. M. Janssen and M. M. C. G. Warmoeskerken, “Transport Phenomena-Data Companion,” DUM, Delft, vol. 2, 1991, pp. 1–154.
   Google Scholar
• D. Lytle and B. W. Webb, “Air jet impingement heat transfer at low nozzle plate spacings,” Int. J. Heat. Mass. Transfer., vol. 37, pp. 1687–1697, 1994. DOI: 10.1016/0017-9310(94)90059-0.
   Web of Science ®Google Scholar
• Z. Xu, Z. Han, J. Wang, and Z. Liu, “The characteristics of heat transfer and flow resistance in a rectangular channel with vortex generators,” Int. J. Heat. Mass. Transf., vol. 116, pp. 61–72, 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.08.083.
   Web of Science ®Google Scholar
• K. Yakut and B. Sahin, “The effects of vortex characteristics on performance of coiled wire turbulators used for heat transfer augmentation,” Appl. Thermal. Eng., vol. 24, no. 16, pp.2427–2438, 2004. DOI: 10.1016/j.applthermaleng.2004.03.008.
   Web of Science ®Google Scholar
• S. J. Kline, “The purposes of uncertainty analysis,” J. Fluids. Eng., vol. 107, pp. 153–160, 1985. DOI: 10.1115/1.3242449.
   Web of Science ®Google Scholar
• S. J. Kline and F. A. McClintock, “Describing uncertainties in single-sample experiments,” Mech. Eng., vol. 73, pp. 3–8, 1953.
   Google Scholar
• F. Incropera and P. D. Dewitt, Introduction to Heat Transfer. third. New York: John Wiley & Sons Inc, 1996.
   Google Scholar
• A. Seth, A. Lawson, A. Thrift, K. A. Thole, and A. Kohli, “Heat transfer from multiple row arrays of low aspect ratio pin fins,” Int. J. Heat. Mass. Transf., vol. 54, pp. 4099–4109, 2011. DOI: 10.1016/j.ijheatmasstransfer.2011.04.001.
   Web of Science ®Google Scholar
• M. E. Lyall, A. A. Thrift, K. A. Thole, and A. Kohli, “Heat transfer from low aspect ratio pin fins,” ASME. J. Turbomach., vol. 133, no. 011001, pp.1–10, 2011. DOI: 10.1115/1.2812951.
   Google Scholar
• J. J. Yeh and M. K. Chyu, Heat Transfer of Staggered Pin Fin Arrays, Masters Presentations/Papers and Bennett Poster Competition, Springer, Berlin, 1998.
   Google Scholar
• M. K. Chyu, Y. C. Hsing, T. I.-P. Shih, and V. Natarajan, Heat Transfer Contributions of Pins and End wall in Pin-Fin Arrays: effects of Thermal Boundary Condition Modeling, ASME Paper 98-GT-175, 1998.
   Google Scholar
• A. A. Zukauskas, “Heat transfer from tubes in cross flow,” Adv. Heat. Transfer, vol. 8, pp. 93–160, 1972.
   Google Scholar