References
- G. Spinato, N. Borhani, and J. R. Thome, “Operational regimes in a closed loop pulsating heat pipe,” Int. J. Thermal Sci., vol. 102, pp. 78−88, 2016. DOI: 10.1016/j.ijthermalsci.2015.11.006.
- B. Markal, O. Aydın, and M. Avcı, “Exergy analysis of a counter-flow Ranque-Hilsch vortex tube having different helical vortex generators,” Int. J. Exergy, vol. 10, pp. 228−238, 2012. DOI: 10.1504/IJEX.2012.045867.
- O. Aydin, M. Avci, B. Markal, and M. Y. Yazici, “An experimental study on the decaying swirl flow in a tube,” Int. Commun. Heat Mass Transfer, vol. 55, pp. 22–28, 2014. DOI: 10.1016/j.icheatmasstransfer.2014.04.012.
- A. Kosar, C. J. Kuo, and Y. Peles, “Boiling heat transfer in rectangular microchannels with reentrant cavities,” Int. J. Heat Mass Transfer, vol. 48, pp. 4867–4886, 2005. DOI: 10.1016/j.ijheatmasstransfer.2005.06.003.
- C. J. Kuo and Y. Peles, “Local measurement of flow boiling in structured surface microchannels,” Int. J. Heat Mass Transfer, vol. 50, pp. 4513–4526, 2007. DOI: 10.1016/j.ijheatmasstransfer.2007.03.047.
- S. G. Singh, A. Kulkarni, S. P. Duttagupta, B. P. Puranik, and A. Agrawal, “Impact of aspect ratio on flow boiling of water in rectangular microchannels,” Exp. Therm. Fluid Sci., vol. 33, no. 1, pp.153–160, 2008. DOI: 10.1016/j.expthermflusci.2008.07.014.
- T. Harirchian and S. V. Garimella, “Microchannel size effects on local flow boiling heat transfer to a dielectric fluid,” Int. J. Heat Mass Transfer, vol. 51, no. 15–16, pp.3724–3735, 2008. DOI: 10.1016/j.ijheatmasstransfer.2008.03.013.
- T. Harirchian and S. V. Garimella, “Effects of channel dimension, heat flux, and mass flux on flow boiling regimes in microchannels,” Int. J. Multiphase Flow, vol. 35, no. 4, pp.349–362, 2009. DOI: 10.1016/j.ijmultiphaseflow.2009.01.003.
- T. Harirchian and S. V. Garimella, “The critical role of channel cross-sectional area in microchannel flow boiling heat transfer,” Int. J. Multiphase Flow, vol. 35, no. 10, pp.904–913, 2009. DOI: 10.1016/j.ijmultiphaseflow.2009.06.005.
- W. Qu and A. Siu-Ho, “Experimental study of saturated flow boiling heat transfer in an array of staggered micro-pin-fins,” Int. J. Heat Mass Transfer, vol. 52, no. 7–8, pp.1853–1863, 2009. DOI: 10.1016/j.ijheatmasstransfer.2008.10.008.
- U. Soupremanien, S. L. Person, M. Favre-Marinet, and Y. Bultel, “Influence of the aspect ratio on boiling flows in rectangular mini channels,” Exp. Therm. Fluid Sci., vol. 35, no. 5, pp.797–809, 2011. DOI: 10.1016/j.expthermflusci.2010.06.014.
- R. Zhuan and W. Wang, “Boiling heat transfer characteristics in a microchannel array heat sink with low mass flow rate,” Appl. Therm. Eng., vol. 511, pp. 65–74, 2013. DOI: 10.1016/j.applthermaleng.2012.09.001.
- M. Law, P. S. Lee, and K. Balasubramanian, “Experimental investigation of flow boiling heat transfer in novel oblique-finned microchannels,” Int. J. Heat Mass Transfer, vol. 76, pp. 419–431, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.04.045.
- M. Law and P. S. Lee, “A comparative study of experimental flow boiling heat transfer and pressure characteristics in straight- and oblique-finned microchannels,” Int. J. Heat Mass Transfer, vol. 85, pp. 797–810, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.01.137.
- Y. K. Prajapati, M. Pathak, and M. K. Khan, “A comparative study of flow boiling heat transfer in three different configurations of microchannels,” Int. J. Heat Mass Transfer, vol. 85, pp. 711–722, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.02.016.
- D. Deng, W. Wan, Y. Tang, Z. Wan, and D. Liang, “Experimental investigations on flow boiling performance of reentrant and rectangular microchannels – a comparative study,” Int. J. Heat Mass Transfer, vol. 82, pp. 435–446, 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.11.074.
- D. Deng, Q. Huang, W. Wan, W. Zhou, and Y. Lian, “Experimental study on flow boiling pressure drop and flow instabilities of reentrant microchannels,” Exp. Heat Transfer, vol. 29, pp. 811–832, 2016. DOI: 10.1080/08916152.2016.1161677.
- B. Markal, O. Aydin, and M. Avci, “Effect of aspect ratio on saturated flow boiling in microchannels,” Int. J. Heat Mass Transfer, vol. 93, pp. 130–143, 2016. DOI: 10.1016/j.ijheatmasstransfer.2015.10.024.
- J. Zeng, S. Zhang, Y. Tang, Y. Sun, and W. Yuan, “Flow boiling characteristics of micro-grooved channels with reentrant cavity array at different operational conditions,” Int. J. Heat Mass Transfer, vol. 114, pp. 1001–1012, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.06.128.
- W. Wan, D. Deng, Q. Huang, T. Zeng, and Y. Huang, “Experimental study and optimization of pin fin shapes in flow boiling of micro pin fin heat sinks,” Appl. Therm. Eng., vol. 114, pp. 436–449, 2017. DOI: 10.1016/j.applthermaleng.2016.11.182.
- D. F. Sempertegui-Tapia and G. Ribatski, “The effect of the cross-sectional geometry on saturated flow boiling heat transfer in horizontal micro-scale channels,” Exp. Therm. Fluid Sci., vol. 89, pp. 98–109, 2017. DOI: 10.1016/j.expthermflusci.2017.08.001.
- C. Choi, J. S. Shin, D. I. Yu, and M. H. Kim, “Flow boiling behaviors in hydrophilic and hydrophobic microchannels,” Exp. Therm. Fluid Sci., vol. 35, pp. 816–824, 2011. DOI: 10.1016/j.expthermflusci.2010.07.003.
- D. Deng, Y. Tang, D. Liang, H. He, and S. Yang, “Flow boiling characteristics in porous heat sink with reentrant microchannels,” Int. J. Heat Mass Transfer, vol. 70, pp. 463–477, 2014. DOI: 10.1016/j.ijheatmasstransfer.2013.10.057.
- D. Deng, et al., “Effects of structural parameters on flow boiling performance of reentrant porous microchannels,” J. Micromech. Microeng., vol. 24, no. 065025, pp.14, 2014. DOI: 10.1088/0960-1317/24/6/065025.
- D. Deng, et al., “Effects of operation parameters on flow boiling characteristics of heat sink cooling systems with reentrant porous microchannels,” Energ. Convers. Manage., vol. 96, pp. 340–351, 2015. DOI: 10.1016/j.enconman.2015.02.072.
- D. Deng, et al., “Effects of heat flux, mass flux and channel size on flow boiling performance of reentrant porous microchannels,” Exp. Therm. Fluid Sci., vol. 64, pp. 13–22, 2015. DOI: 10.1016/j.expthermflusci.2015.01.015.
- C. Haas, F. Kaiser, T. Schulenberg, and T. Wetzel, “Critical heat flux for flow boiling of water on micro-structured Zircaloy tube surfaces,” Int. J. Heat Mass Transfer, vol. 120, pp. 793–806, 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.12.077.
- B. Markal, O. Aydin, and M. Avci, “An experimental investigation of saturated flow boiling heat transfer and pressure drop in square microchannels,” Int. J. Refrig., vol. 65, pp. 1–11, 2016. DOI: 10.1016/j.ijrefrig.2015.12.013.
- S. J. Kline and F. A. McClintock, “Describing uncertainties in single-sample experiments,” Mech. Eng., vol. 75, pp. 3–8, 1953.
- B. Markal, O. Aydin, and M. Avci, “M., Prediction of heat transfer coefficient in saturated flow boiling heat transfer in parallel rectangular microchannel heat sinks: an experimental study,” Heat Transfer Eng., vol. 38, pp. 1415–1428, 2017. DOI: 10.1080/01457632.2016.1255038.
- B. Markal, O. Aydin, and M. Avci, “Prediction of pressure drop for flow boiling in rectangular multi-microchannel heat sinks,” Heat Transfer Eng., 2017. DOI:10.1080/01457632.2017.1404552.
- N. Tran, M. W. Wambsganss, and D.M. France, “Small circular and rectangular channel boiling with two refrigerants,” Int. J. Multiphase Flow, vol. 22, no. 3, pp. 485–498, 1996. DOI:10.1016/0301-9322(96)00002-X.
- G. M. Lazarek, and S. H. Black, “Evaporative heat transfer, pressure drop and critical heat flux in a small vertical tube with R-113,” Int. J. Heat Mass Transfer, vol. 25, no. 7, pp. 945–960, 1982. DOI:10.1016/0017-9310(82)90070-9.
- C. B. Tibiriçá, and G. Ribatski, “Flow patterns and bubble departure fundamental characteristics during flow boiling in microscale channels,” Exp. Therm. Fluid Sci., vol. 59, pp. 152–165, 2014. DOI:10.1016/j.expthermflusci.2014.02.017.