Heat transfer and friction factor characteristics of annuli formed by the smooth inner tube and corrugated outer tube – An experimental study

References

• A. R. Darzi, M. Farhadi, and K. Sedighi, “Experimental investigation of convective heat transfer and friction factor of Al2O3/water nanofluid in helically corrugated tube,” Exp. Therm. Fluid Sci., vol. 57, pp. 188–199, 2014. DOI: 10.1016/j.expthermflusci.2014.04.024.
   Web of Science ®Google Scholar
• S. Yadav, N. Anand, and S. K. Sahu. Thermal performance in an annuli formed by smooth inner tube and outer corrugated tube for turbulent flow regime in the counter flow. Proce. of the 24th National and 2nd International ISHMT-ASTFE, Heat and Mass Transfer Conference (IHMTC-2017) December 27–30, 2017. BITS-Pilani (Hyderabad campus), Hyderabad, India (Paper ID: IHMTC2017-09-0902).
   Google Scholar
• S. Yadav, M. P. Paulraj, and S. K. Sahu, Experimental investigation of heat transfer and friction factor characteristics using helical surface ring turbulators in an annuli of double pipe heat exchanger, In Proceedings of ASME 2018 Power Conference collocated with the 12th International Conference on Energy Sustainability and the ASME 2018 Nuclear Forum, Florida, USA 24–28 June, 2018, pp. V002T12A006, (DOI: 10.1115/POWER2018-7231)
   Google Scholar
• A. Bartwal, A. Gautam, M. Kumar, C. K. Mangrulkar, and S. Chamoli, “Thermal performance intensification of a circular heat exchanger tube integrated with compound circular ring–metal wire net inserts,” Chem. Eng. Process - Process Intensif., vol. 124, pp. 50–70, 2018. DOI: 10.1016/j.cep.2017.12.002.
   Web of Science ®Google Scholar
• S. K. Singh, M. Kumar, A. Kumar, A. Gautam, and S. Chamoli, “Thermal and friction characteristics of a circular tube fitted with perforated hollow circular cylinder inserts,” Appl. Therm. Eng., vol. 130, pp. 230–241, 2018. DOI: 10.1016/j.applthermaleng.2017.10.090.
   Web of Science ®Google Scholar
• S. Chamoli, R. Lu, and P. Yu, “Thermal characteristic of a turbulent flow through a circular tube fitted with perforated vortex generator inserts,” Appl. Therm. Eng., vol. 121, pp. 1117–1134, 2017. DOI: 10.1016/j.applthermaleng.2017.03.145.
   Web of Science ®Google Scholar
• S. S. Chougule and S. K. Sahu, “Comparative study on heat transfer enhancement of low volume concentration of Al2O3–water and carbon nano-tube–water nano-fluids in transition regime using helical screw tape inserts,” Exp. Heat Transfer, vol. 29, no. 1, pp.17–36, 2016. DOI: 10.1080/08916152.2014.926432.
   Web of Science ®Google Scholar
• S. Chamoli, P. Yu, and S. Yu, “Multi-objective shape optimization of a heat exchanger tube fitted with compound inserts,” Appl. Therm. Eng., vol. 117, pp. 708–724, 2017. DOI: 10.1016/j.applthermaleng.2017.02.047.
   Web of Science ®Google Scholar
• B. Kumar, M. Kumar, A. K. Patil, and S. Jain, “Effect of V cut in perforated twisted tape insert on heat transfer and fluid flow behavior of tube flow: an experimental study,” Exp. Heat Transfer, 2018. DOI: 10.1080/08916152.2018.1545808.
   Web of Science ®Google Scholar
• A. R. S. Suri, A. Kumar, and R. Maithani, “Experimental determination of enhancement of heat transfer in a multiple square perforated twisted tape inserts heat exchanger tube,” Exp. Heat Transfer, vol. 31, no. 2, pp. 85–105, 2018. DOI: 10.1080/08916152.2017.1397814.
   Web of Science ®Google Scholar
• M. K. Bhuiya, A. K. Azad, M. S. U. Chowdhury, and M. Saha, “Heat transfer augmentation in a circular tube with perforated double counter twisted tape inserts,” Int. Commun. Heat Mass Transfer, vol. 74, pp. 18–26, 2016. DOI: 10.1016/j.icheatmasstransfer.2016.03.001.
   Web of Science ®Google Scholar
• R. Bhadouriya, A. Agrawal, and S. V. Prabhu, “Experimental and numerical study of fluid flow and heat transfer in an annulus of inner twisted square duct and outer circular pipe,” Int. J. Therm. Sci., vol. 94, pp. 96–109, 2015. DOI: 10.1016/j.ijthermalsci.2015.02.019.
   Web of Science ®Google Scholar
• R. Bhadouriya and S. V. AAgrawal, “Prabhu. Experimental and numerical study of fluid flow and heat transfer in a twisted square duct,” Int. J. Heat Mass Transfer, vol. 82, pp. 143–158, 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.11.054.
   Web of Science ®Google Scholar
• B. V. Dzyubenko, “Features of heat and mass transfer in bundles of spiral tubes,” J. Eng. Phys., vol. 50, no. 4, pp.373–379, 1986. DOI: 10.1007/BF00871055.
   Google Scholar
• X. H. Tan, D. S. Zhu, G. Y. Zhou, and L. D. Zeng, “Experimental and numerical study of convective heat transfer and fluid flow in twisted oval tubes,” Int. J. Heat Mass Transfer, vol. 55, pp. 4701–4710, 2012. DOI: 10.1016/j.ijheatmasstransfer.2012.04.030.
   Web of Science ®Google Scholar
• X. Tang, X. Dai, and D. Zhu, “Experimental and numerical investigation of convective heat transfer and fluid flow in twisted spiral tube,” Int. J. Heat Mass Transfer, vol. 90, pp. 523–541, 2015.
   Web of Science ®Google Scholar
• S. Yang, L. Zhang, and H. Xu, “Experimental study on convective heat transfer and flow resistance characteristics of water flow in twisted elliptical tubes,” Appl. Therm. Eng., vol. 31, pp. 2981–2991, 2011. DOI: 10.1016/j.applthermaleng.2011.05.030.
   Web of Science ®Google Scholar
• L. B. Wang, W. Q. Tao, Q. W. Wang, and Y. L. He, “Experimental and numerical study of turbulent heat transfer in twisted square ducts,” J. Heat Transfer, vol. 123, no. 5, pp.868–877, 2001. DOI: 10.1115/1.1389464.
   Web of Science ®Google Scholar
• S. Bhattacharyya, A. C. Benim, H. Chattopadhyay, and A. Banerjee, “Experimental investigation of heat transfer performance of corrugated tube with spring tape inserts,” Exp. Heat Transfer, 2018. DOI: 10.1080/08916152.2018.1531955.
   Web of Science ®Google Scholar
• S. Rainieri and G. Pagliarini, “Convective heat transfer to temperature dependent property fluids in the entry region of corrugated tubes,” Int. J. Heat Mass Transfer, vol. 45, pp. 4525–4536, 2002. DOI: 10.1016/S0017-9310(02)00156-4.
   Web of Science ®Google Scholar
• S. W. Ahn, “Experimental studies on heat transfer in the annuli with corrugated inner tubes,” KSME Int. J., vol. 17, no. 8, pp.1226–1233, 2003. DOI: 10.1007/BF03016518.
   Web of Science ®Google Scholar
• P. G. Vicente, A. Garcia, and A. Viedma, “Mixed convection heat transfer and isothermal pressure drop in corrugated tubes for laminar and transition flow,” Int. Comm. Heat Mass Transfer, vol. 31, pp. 651–662, 2004. DOI: 10.1016/S0735-1933(04)00052-1.
   Web of Science ®Google Scholar
• K. Aroonrat, A. S. Dalkilic, and S. Wongwises, “Experimental study on evaporative heat transfer and pressure drop of R-134a flowing downward through vertical corrugated tubes with different corrugation pitches,” Exp. Heat Transfer, vol. 26, pp. 41–63, 2013. DOI: 10.1080/08916152.2011.631080.
   Web of Science ®Google Scholar
• S. Pethkool, S. Eiamsa-Ard, and S. Kwankaomeng, “PPromvonge, Turbulent heat transfer enhancement in a heat exchanger using helically corrugated tube,” Int. Comm. Heat Mass Transfer, vol. 38, pp. 340–347, 2011. DOI: 10.1016/j.icheatmasstransfer.2010.11.014.
   Web of Science ®Google Scholar
• K. Wongcharee and S. Eiamsaard, “Heat transfer enhancement by using CuO/water nanofluid in corrugated tube equipped with twisted tape,” Int. Comm. Heat Mass Transfer, vol. 39, pp. 251–257, 2012. DOI: 10.1016/j.icheatmasstransfer.2011.11.010.
   Web of Science ®Google Scholar
• H. Han, B. Xi, L. H. Wu, and W. Shao, “Multi-objective shape optimization of double pipe heat exchanger with inner corrugated tube using RSM method,” Int. J. Therm. Sci., vol. 90, pp. 173–186, 2015. DOI: 10.1016/j.ijthermalsci.2014.12.010.
   Web of Science ®Google Scholar
• H. S. Dizaji, S. Jafarmadar, and F. Mobadersani, “Experimental studies on heat transfer and pressure drop characteristics for new arrangements of corrugated tubes in a double pipe heat exchanger,” Int. J. Therm. Sci., vol. 96, pp. 211–220, 2015. DOI: 10.1016/j.ijthermalsci.2015.05.009.
   Web of Science ®Google Scholar
• A. Herleb, E. Franz, and M. Breuer, “Experimental investigation of heat transfer and friction factor characteristic of fully developed gas flow in single-start and three-start corrugated tubes,” Int. J. Heat Mass Transfer, vol. 103, pp. 538–547, 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.07.087.
   Web of Science ®Google Scholar
• H. S. Dizaji and S. Jafarmadar, “Experiments on new arrangements of convex and concave corrugated tubes through a double pipe heat exchanger,” Exp. Heat Transfer, vol. 29, pp. 1–16, 2016. DOI: 10.1080/08916152.2015.1046015.
   Web of Science ®Google Scholar
• L. Jianfeng, S. Xiangyang, D. Jing, and Y. Jianping, “Transition and turbulent convective heat transfer of molten salt in spirally grooved tube,” Exp. Therm. Fluid Sci., vol. 47, pp. 180–185, 2013. DOI: 10.1016/j.expthermflusci.2013.01.014.
   Web of Science ®Google Scholar
• W. R. Vanzyl, J. Dirker, and J. P. Meyer, “Single-phase convective heat transfer and pressure drop coefficients in concentric annuli,” Heat Transfer Eng., vol. 34, no. 13, pp.1112–1123, 2013. DOI: 10.1080/01457632.2013.763550.
   Web of Science ®Google Scholar
• J. Dirker and J. P. Meyer, “Convection heat transfer in concentric annuli,” Exp. Heat Transfer, vol. 17, no. 1, pp. 19–29. DOI:10.1080/08916150490246528.
   Web of Science ®Google Scholar
• S. Yadav and S. K. Sahu, “Heat transfer augmentation in double pipe water to air counter flow heat exchanger with helical surface disc turbulators,” Chem. Eng. Process - Process Intensif., vol. 135, pp. 120–132, 2019. DOI: 10.1016/j.cep.2018.11.018.
   Web of Science ®Google Scholar
• F. P. Incropera and D. P. Dewitt, Fundamentals of Heat and Mass Transfer, fourthed. John Wiley and Sons, 1996, pp. 419–481.
   Google Scholar
• R. J. Moffat, “Describing the uncertainties in experimental results,” Exp. Therm. Fluid Sci., vol. 1, pp. 3–17, 1988. DOI: 10.1016/0894-1777(88)90043-X.
   Web of Science ®Google Scholar
• ANSI/ASME, measurement uncertainty. PTC 19, 1-1985, 1986.
   Google Scholar
• W. N. Rohsenow, J. P. Hartnett, and Y. I. Cho, Handbook of Heat Transfer, 3rded. McGraw- Hill, 1998, pp. 5.32–5.33.
   Google Scholar
• R. L. Webb and E. R. G. Eckert, “Application of rough surfaces to heat exchanger design,” Int. J. Heat Mass Transfer, vol. 15, pp. 1647–1658, 1972. DOI: 10.1016/0017-9310(72)90095-6.
   Web of Science ®Google Scholar
• R. L. Webb and M. J. Scott, “A parametric analysis of the performance of internally finned tubes for heat exchanger application,” ASME J. Heat Transf., vol. 102, pp. 38–43, 1980. DOI: 10.1115/1.3244245.
   Web of Science ®Google Scholar
• Y. Hong, J. Dua, S. Wang, and S. Huang, “Heat transfer and flow behaviors of a wavy corrugated tube,” Appl. Therm. Eng., vol. 126, pp. 151–166, 2017. DOI: 10.1016/j.applthermaleng.2017.07.135.
   Web of Science ®Google Scholar
• W. Wang, Y. Zhang, B. Li, and Y. Li, “Numerical investigation of tube-side fully developed turbulent flow and heat transfer in outward corrugated tubes,” Int. J. Heat Mass Transfer, vol. 116, pp. 115–126, 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.09.003.
   Web of Science ®Google Scholar
• V. Srinivasan and R. N. Christensen, “Experimental investigation of heat transfer and pressure drop characteristics of flow through spirally fluted tubes,” Exp. Therm. Fluid Sci., vol. 5, pp. 820–827, 1992. DOI: 10.1016/0894-1777(92)90126-P.
   Web of Science ®Google Scholar
• M. Sun and M. Zeng, “Investigation on turbulent flow and heat transfer characteristics and technical economy of corrugated tube,” Appl. Therm. Eng., vol. 129, pp. 1–11, 2018. DOI: 10.1016/j.applthermaleng.2017.09.136.
   Web of Science ®Google Scholar
• P. Bharadwaj, A. D. Khondge, and A. W. Date, “Heat transfer and pressure drop in a spirally grooved tube with twisted tape insert,” Int. J. Heat Mass Transfer, vol. 52, pp. 1938–1944, 2009. DOI: 10.1016/j.ijheatmasstransfer.2008.08.038.
   Web of Science ®Google Scholar
• J. Meng, X. Liang, Z. Chen, and Z. Li, “Experimental study on convective heat transfer in alternating elliptical axis tubes,” Exp. Therm. Fluid Sci., vol. 29, pp. 457–465, 2005. DOI: 10.1016/j.expthermflusci.2004.04.006.
   Web of Science ®Google Scholar
• P. Kumar, A. Kumar, S. Chamoli, and M. Kumar, “Experimental investigation of heat transfer enhancement and fluid flow characteristics in a protruded surface heat exchanger tube,” Exp. Therm. Fluid Sci., vol. 71, pp. 42–51, 2016. DOI: 10.1016/j.expthermflusci.2015.10.014.
   Web of Science ®Google Scholar
• P. Naphon, M. Nuchjapo, and J. Kurujareon, “Tube side heat transfer coefficient and friction factor characteristics of horizontal tubes with helical rib,” Energ. Convers. Manage., vol. 47, pp. 3031–3044, 2006. DOI: 10.1016/j.enconman.2006.03.023.
   Web of Science ®Google Scholar
• A. Barba, S. Rainieri, and M. Spiga, “Heat transfer enhancement in corrugated tube,” Int. Commun. Heat Mass Transf., vol. 29, no. 3, pp.313–322, 2002. DOI: 10.1016/S0735-1933(02)00321-4.
   Web of Science ®Google Scholar