Optimum thermo-hydraulic performance of solar air heater provided with cubical roughness on the absorber surface

References

• A.-M. Ebrahim Momin, J. S. Saini, and S. C. Solanki, “Heat transfer and friction in solar air heater duct with V-shaped rib roughness on absorber plate,” Int. J. Heat Mass Transf., vol. 45, pp. 3383–3396, 2002. DOI:10.1016/S0017-9310(02)00046-7.
   Web of Science ®Google Scholar
• H. K. Ghritlahre and R. K. Prasad, “Prediction of exergetic efficiency of arc shaped wire roughened solar air heater using ANN model,” Int. J. Heat Tech., vol. 36, pp. 1107–1115, 2018b. DOI:10.18280/ijht.360343.
   Web of Science ®Google Scholar
• V. B. Gawande, A. S. Dhoble, D. B. Zodpe, and S. Chamoli, “A review of CFD methodology used in literature for predicting thermo-hydraulic performance of a roughened solar air heater,” Renewable Sustainable Energy Rev., vol. 54, pp. 550–605, 2016a. DOI:10.1016/j.rser.2015.10.025.
   Web of Science ®Google Scholar
• H. K. Ghritlahre and R. K. Prasad, “Exergetic Performance Prediction of a Roughened Solar Air Heater Using Artificial Neural Network,” Stroj. Vestn. J. Mech. E, vol. 64, pp. 195–206, 2018a. DOI:10.5545/sv-jme.2017.4575.
   Web of Science ®Google Scholar
• C. Prakash and R. P. Saini, “Heat transfer and friction in rectangular solar air heater duct having spherical and inclined rib protrusions as roughness on absorber plate,” Exp. Heat Transf., vol. 32, pp. 469–487, 2019. DOI:10.1080/08916152.2018.1543367.
   Web of Science ®Google Scholar
• A. Soi, R. Singh, and B. Bhushan, “Heat transfer and friction characteristics of solar air heater duct having protruded roughness geometry on absorber plate,” Exp. Heat Transf., vol. 31, no. 6, pp. 571–585, 2018. DOI: 10.1080/08916152.2018.1468832.
   Web of Science ®Google Scholar
• R. Nadda, A. Kumar, R. Maithani, and R. Kumar, “Investigation of thermal and hydrodynamic performance of impingement jets solar air passage with protrusion with combination arc obstacle on the heated plate,” Exp. Heat Transf., vol. 31, no. 3, pp. 232–250, 2018. DOI: 10.1080/08916152.2017.1405102.
   Web of Science ®Google Scholar
• A. R. Jaurker, J. S. Saini, and B. K. Gandhi, “Heat transfer and friction characteristics of rectangular solar air heater duct using rib-grooved artificial roughness,” Sol. Energy, vol. 80, pp. 895–907, 2006. DOI:10.1016/j.solener.2005.08.006.
   Web of Science ®Google Scholar
• A. Layek, J. S. Saini, and S. C. Solanki, “Second law optimization of a solar air heater having chamfered rib-groove roughness on absorber plate,” Renew. Energy, vol. 32, pp. 1967–1980, 2007. DOI:10.1016/j.renene.2006.11.005.
   Web of Science ®Google Scholar
• M. K. Gupta and S. C. Kaushik, “Performance evaluation of solar air heater having expanded metal mesh as artificial roughness on absorber plate,” Int. J. Therm. Sci., vol. 48, pp. 1007–1016, 2009. DOI:10.1016/j.ijthermalsci.2008.08.011.
   Web of Science ®Google Scholar
• D. L. Gee and R. L. Webb, “Forced convection heat transfer in helically rib-roughened tubes,” Int. J. Heat Mass Transf., vol. 23, pp. 1127–1136, 2003. DOI:10.1016/0017-9310(80)90177-5.
   Google Scholar
• S. V. Karmare and A. N. Tikekar, “Heat transfer and friction factor correlation for artificially roughened duct with metal grit ribs,” Int. J. Heat Mass Transf., vol. 50, pp. 4342–4351, 2007. DOI:10.1016/j.ijheatmasstransfer.2007.01.065.
   Web of Science ®Google Scholar
• G. J. Zdaniuk, L. M. Chamra, and P. J. Mago, “Experimental determination of heat transfer and friction in helically-finned tubes,” Exp. Therm. Fluid Sci., vol. 32, pp. 761–775, 2008. DOI:10.1016/j.expthermflusci.2007.09.006.
   Web of Science ®Google Scholar
• R. L. Webb, E. R. G. Eckert, and R. J. Goldstein, “Heat transfer and friction in tubes with repeated-rib roughness,” Int. J. Heat Mass Transf., vol. 14, pp. 601–617, 1971. DOI:10.1016/0017-9310(71)90009-3.
   Web of Science ®Google Scholar
• R. Karwa, S. C. Solanki, and J. S. Saini, “Thermo-hydraulic performance of solar air heaters having integral chamfered rib roughness on absorber plates,” Energy, vol. 26, pp. 161–176, 2001. DOI:10.1016/S0360-5442(00)00062-1.
   Web of Science ®Google Scholar
• B. N. Prasad and J. S. Saini, “Optimal thermohydraulic performance of artificially roughened solar air heaters,” Sol. Energy., vol. 47, pp. 91–96, 1991. DOI:10.1016/0038-092X(91)90039-Y.
   Web of Science ®Google Scholar
• S. V. Karmare and A. N. Tikekar, “Experimental investigation of optimum thermohydraulic performance of solar air heaters with metal rib grits roughness,” Sol. Energy, vol. 83, pp. 6–13, 2009. DOI:10.1016/j.solener.2008.05.017.
   Web of Science ®Google Scholar
• S. Singh, S. Chander, and J. S. Saini, “Investigations on thermo-hydraulic performance due to flow-attack-angle in V-down rib with gap in a rectangular duct of solar air heater,” Appl. Energy, vol. 97, pp. 907–912, 2012. DOI:10.1016/j.apenergy.2011.11.090.
   Web of Science ®Google Scholar
• D. Gupta, S. C. Solanki, and J. S. Saini, “Thermohydraueic performance of solar air heaters with roughened absorber plates,” Sol. Energy, vol. 61, pp. 33–42, 1997. DOI:10.1016/S0038-092X(97)00005-4.
   Web of Science ®Google Scholar
• S. K. Verma and B. N. Prasad, “Investigation for the optimal thermohydraulic performance of artificially roughened solar air heaters,” Renew. Energy, vol. 20, pp. 19–36, 2000. DOI:10.1016/S0960-1481(99)00081-6.
   Web of Science ®Google Scholar
• S. W. Ahn, “The effects of roughness types on friction factors and heat transfer in roughened rectangular duct,” Int. Commun. Heat Mass Transf., vol. 28, pp. 933–942, 2001. DOI:10.1016/S0735-1933(01)00297-4.
   Web of Science ®Google Scholar
• S. Ruck, S. Kohler, G. Schlindwein, and F. Arbeiter, “Heat transfer and pressure drop measurements in channels roughened by variously shaped ribs on one wall,” Exp. Heat Transf., vol. 31, no. 4, pp. 334–354, 2018. DOI: 10.1080/08916152.2017.1410506.
   Web of Science ®Google Scholar
• A. Kumar, R. P. Saini, and J. S. Saini, “Experimental investigation on heat transfer and fluid flow characteristics of air flow in a rectangular duct with Multi v-shaped rib with gap roughness on the heated plate,” Sol. Energy, vol. 86, pp. 1733–1749, 2012. DOI:10.1016/j.solener.2012.03.014.
   Web of Science ®Google Scholar
• R. K. Ravi and R. P. Saini, “Effect of roughness elements on thermal and thermohydraulic performance of double pass solar air heater duct having discrete multi V-shaped and staggered rib roughness on both sides of the absorber plate,” Exp. Heat Transf., vol. 31, no. 1, pp. 47–67, 2018. DOI: 10.1080/08916152.2017.1350217.
   Web of Science ®Google Scholar
• B. N. Prasad and J. S. Saini, “Effect of artificial roughness on heat transfer and friction factor in a solar air heater,” Sol. Energy., vol. 41, pp. 555–560, 1988. DOI:10.1016/0038-092X(88)90058-8.
   Web of Science ®Google Scholar
• R. P. Saini and J. Verma, “Heat transfer and friction factor correlations for a duct having dimple-shape artificial roughness for solar air heaters,” Energy, vol. 33, pp. 1277–1287, 2008. DOI:10.1016/j.energy.2008.02.017.
   Web of Science ®Google Scholar
• A. Lanjewar, J. L. Bhagoria, and R. M. Sarviya, “Experimental study of augmented heat transfer and friction in solar air heater with different orientations of W-Rib roughness,” Exp. Therm. Fluid Sci., vol. 35, pp. 986–995, 2011. DOI:10.1016/j.expthermflusci.2011.01.019.
   Web of Science ®Google Scholar
• M. J. Lewis, “Roughness functions, the thermohydraulic performance of rough surfaces and the Hall transformation-an overview,” Int. J. Heat Mass Transf., vol. 17, pp. 809–814, 1974. DOI:10.1016/0017-9310(74)90149-5.
   Web of Science ®Google Scholar
• S. Yadav, M. Kaushal, and S. Varun, “Nusselt number and friction factor correlations for solar air heater duct having protrusions as roughness elements on absorber plate,” Exp. Therm. Fluid Sci., vol. 44, pp. 34–41, 2013. DOI:10.1016/j.expthermflusci.2012.05.011.
   Web of Science ®Google Scholar
• S. Kumar and R. P. Saini, “CFD based performance analysis of a solar air heater duct provided with artificial roughness,” Renew. Energy, vol. 34, pp. 1285–1291, 2009. DOI:10.1016/j.renene.2008.09.015.
   Web of Science ®Google Scholar
• R. L. Webb, R. Narayanamurthy, and P. Thors, “Heat Transfer and Friction Characteristics of Internal Helical-Rib Roughness,” ASME.J. Heat Transf., vol. 122, pp. 134–142, 1999. DOI:10.1115/1.521444.
   Web of Science ®Google Scholar
• V. B. Gawande, A. S. Dhoble, D. B. Zodpe, and S. Chamoli, “Experimental and CFD-based thermal performance prediction of solar air heater provided with right-angle triangular rib as artificial roughness,” J. Braz. Soc. Mech. Sci. Eng., vol. 38, no. 2, pp. 551–579, 2016c. DOI: 10.1007/s40430-015-0391-8.
   Web of Science ®Google Scholar
• ASHRAE, Standard, 9397, Method of Testing to Determine the Thermal Performance of Solar Air Heater. New York: American Society for Heating, Refrigeration and Air Conditioning Engineering, 1977, pp. 1–34.
   Google Scholar
• H. K. Ghritlahre and R. K. Prasad, “Prediction of heat transfer of two different types of roughened solar air heater using Artificial Neural Network technique,” Thermal Sci. Engg. Progress, vol. 8, pp. 145–153, 2018c. DOI:10.1016/j.tsep.2018.08.014.
   Google Scholar
• S. P. Sukhatme and J. K. Nayak. Solar Energy. McGraw-Hill Education, 2017.
   Google Scholar
• S. Bhattacharyya, A. C. Benim, H. Chattopadhyay, and A. Banerjee, “Experimental investigation of heat transfer performance of corrugated tube with spring tape inserts,” Exp. Heat Transf., pp. 1–15, 2018. DOI: 10.1080/08916152.2018.1531955.
   Web of Science ®Google Scholar
• V. B. Gawande, A. S. Dhoble, D. B. Zodpe, and S. Chamoli, “Experimental and CFD investigation of convection heat transfer in solar air heater with reverse L-shaped ribs,” Solar Energy, vol. 131, pp. 275–295, 2016b. DOI:10.1016/j.solener.2016.02.040.
   Web of Science ®Google Scholar
• J. S. Sawhney, R. Maithani, and S. Chamoli, “Experimental investigation of heat transfer and friction factor characteristics of solar air heater using wavy delta winglets,” Appl. Therm. Eng., vol. 117, pp. 740–751, 2017. DOI:10.1016/j.applthermaleng.2017.01.113.
   Web of Science ®Google Scholar
• S. J. Kline and F. A. McClintock, “Describing Uncertainties in Single-Sample Experiments,” Mech. Engg., vol. 75, pp. 3–8, 1953.
   Google Scholar