References
- R. H. Perry, D. W. Green, and J. O. Maloney,Perry’s Chemical Engineers Handbook. New York: McGraw–Hill, 1997.
- W. M. Kays and A. L. London, Compact Heat Exchangers (in German). Berlin: Akademie – Verlag, 1973.
- M. Otović, et al., “Reconsideration of data and correlations for plate finned–tube heat exchangers,” Heat Mass Transfer, 2018. DOI: 10.1007/s00231-018-2328-0.
- D. G. Rich, “The effect of fin spacing on the heat transfer and friction performance of multi row, smooth plate fin–and–tube heat exchangers,” ASHRAE Trans., vol. 79, pp. 135–145, 1973.
- D. G. Rich, “The effect of the number of tube rows on heat transfer performance of smooth plate fin–and–tube heat exchangers,” ASHRAE Trans., vol. 81, pp. 307–317, 1975.
- F. C. McQuiston and D. R. Tree, “Heat–transfer and flow–friction data for two fin–tube surfaces,” J Heat Transfer, vol. 93, pp. 249–250, 1971. DOI: 10.1115/1.3449802.
- F. C. McQuiston, “Heat, mass and momentum transfer data for five plate–fin–tube heat transfer surfaces,” ASHRAE Trans., vol. 84, pp. 266–293, 1978.
- F. C. McQuiston, “Correlation of heat, mass and momentum transport coefficients for plate–fin–tube heat transfer surfaces with staggered tubes,” ASHRAE Trans., vol. 84, pp. 294–309, 1978.
- F. Haliçi, I. Taymaz, and M. Gunduz, “The effect of the number of tube rows on heat, mass and momentum transfer in flat–plate finned tube heat exchangers,” Energy, vol. 26, pp. 963–972, 2001. DOI: 10.1016/S0360-5442(01)00048-2.
- P. W. Eckels and T. J. Rabas, “Dehumidification: on the correlation of wet and dry transport processes in plate finned–tube heat exchangers,” J Heat Transfer, vol. 109, pp. 575–582, 1987. DOI: 10.1115/1.3248127.
- L. H. Tang, Z. Min, G. N. Xie, and Q. W. Wang, “Fin pattern effects on air–side heat transfer and friction characteristics of fin–and–tube heat exchangers with large number of large–diameter tube rows,” Heat Transfer Eng., vol. 30, no. 3, pp.171–180, 2009. DOI: 10.1080/01457630802304253.
- Y. C. Liu, I. Y. Chen, R. Hu, C. C. Wang, and B. C. Yang, “Sensible airside performance of fin–and–tube heat exchangers – data with larger diameter tube,” ASHRAE Trans., vol. 114, pp. 379–386, 2008.
- C. C. Wang and K. Y. Chi, “Heat transfer and friction characteristics of plain fin–and–tube heat exchangers, part I: new experimental data,” Int J Heat Mass Transf, vol. 43, no. 15, pp.2681–2691, 2000. DOI: 10.1016/S0017-9310(99)00332-4.
- S. B. Genić, et al., “Thermal performances of a “black box” heat exchanger in district heating system,” Heat Mass Transf., vol. 54, no. 3, pp. 867–873, March. 1 2018. DOI: 10.1007/s00231-017-2182-5.
- S. Genić, B. Jaćimović, and L. Vladić, “Heat transfer rate of direct–contact condensation on baffle trays,” Int. J. Heat Mass Transf., vol. 51, pp. 25–26, 5772–5776, 2008. DOI: 10.1016/j.ijheatmasstransfer.2008.05.017.
- S. Genić, B. Jaćimović, M. Jarić, N. Budimir, and M. Dobrnjac, “Research on the shell–side thermal performances of heat exchangers with helical tube coils,” Int. J. Heat Mass Transf., vol. 55, pp. 15–16, 4295–4300, 2012. DOI: 10.1016/j.ijheatmasstransfer.2012.03.074.
- P. Milanović, B. Jaćimović, and S. Genić, “Experimental measurement of fouling resistance in the heat exchanger of a geothermal heating system,” Geothermics, vol. 35, no. 1, pp.79–86, 2006. DOI: 10.1016/j.geothermics.2005.11.003.
- S. Genić, B. Jaćimović, and B. Janjić, “Experimental research of highly viscous fluid cooling in cross–flow to a tube bundle,” Int J Heat Mass Transf, vol. 50, pp. 7–8, 1288–1294, 2007. DOI: 10.1016/j.ijheatmasstransfer.2006.09.004.
- B. Jaćimović, S. Genić, and D. Lelea, “Calculation of the heat transfer coefficient for laminar flow in pipes in practical engineering applications, heat transfer engineering,” Paper No. THE–11116, In press.
- H. Hausen, Warmeubertragung im gegenstorm, gleichstorm und kreuzstorm. Berlin: Springer–Verlag, 1976.
- A. Nir, “Heat transfer and friction factor correlations for crossflow over staggered finned tube banks,” Heat Transfer Eng., vol. 12, no. 1, pp.43–58, 1991. DOI: 10.1080/01457639108939746.
- D. Lelea, “The heat transfer and fluid flow of a partially heated microchannel heat sink,” Int. J. Heat Mass Transf., vol. 36, no. 8, pp.794–798, 2009. DOI: 10.1016/j.icheatmasstransfer.2009.05.003.