Effects of serrated circular ring with rectangular winglets on thermal properties of tube heat exchanger: an experimental and numerical study

References

• A. Akcayoglu, “Flow past confined delta-wing type vortex generators,” Exp. Therm. Fluid Sci., vol. 35, pp. 112–120, 2011. DOI: 10.1016/j.expthermflusci.2010.08.012.
   Web of Science ®Google Scholar
• M. Khoshvaght-Aliabadi, O. Sartipzadeh, and A. Alizadeh, “An experimental study on vortex-generator insert with different arrangements of delta-winglets,” Energy, vol. 82, pp. 629–639, 2015. DOI: 10.1016/j.energy.2015.01.072.
   Web of Science ®Google Scholar
• P. Promvonge, C. Khanoknaiyakarn, S. Kwankaomeng, and C. Thianpong, “Thermal behavior in solar air heater channel fitted with combined rib and delta-winglet,” Int. Commun. Heat Mass Transfer, vol. 38, pp. 749–756, 2011. DOI: 10.1016/j.icheatmasstransfer.2011.03.014.
   Web of Science ®Google Scholar
• J. D. Zhu and H. Chen, “Numerical study on enhanced heat transfer by twisted tape inserts inside tube,” Procedia Eng., vol. 130, pp. 256–262, 2015. DOI: 10.1016/j.proeng.2015.12.219.
   Google Scholar
• C. Vashishtha, A. Patil, and M. Kumar, “Experimental investigation of heat transfer and pressure drop in a circular tube with multiple inserts,” Appl. Therm. Eng., vol. 96, pp. 117–129, 2016. DOI: 10.1016/j.applthermaleng.2015.11.077.
   Web of Science ®Google Scholar
• S. Alzahrani and S. Usman, “CFD simulations of the effect of in-tube twisted tape design on heat transfer and pressure drop in natural circulation,” Therm. Sci. Eng. Prog., vol. 11, pp. 325–333, 2019. DOI: 10.1016/j.tsep.2019.03.017.
   Google Scholar
• M. M. K. Bhuiya, A. S. M. Sayema, M. Islam, M. S. U. Chowdhury, and M. Shahabuddin, “Performance assessment in a heat exchanger tube fitted with double counter twisted tape inserts,” Int. Commun. Heat Mass Transfer, vol. 50, pp. 25–33, 2014. DOI: 10.1016/j.icheatmasstransfer.2013.11.005.
   Web of Science ®Google Scholar
• A. Suri, A. Kumar, and R. Maithani, “Heat transfer enhancement of heat exchanger tube with multiple square perforated twisted tape inserts: experimental investigation and correlation development,” Chem. Eng. Process.: Process Intensif., vol. 116, pp. 76–96, 2017. DOI: 10.1016/j.cep.2017.02.014.
   Web of Science ®Google Scholar
• M. E. Nakhchi and J. A. Esfahani, “Numerical investigation of rectangular-cut twisted tape insert on performance improvement of heat exchangers,” Int. J. Therm. Sci., vol. 138, pp. 75–83, 2019. DOI: 10.1016/j.ijthermalsci.2018.12.039.
   Web of Science ®Google Scholar
• M. E. Nakhchi and J. A. Esfahani, “Performance intensification of turbulent flow through heat exchanger tube using double V-cut twisted tape inserts,” Chem. Eng. Process. - Process Intensif., vol. 141, pp. 107533, 2019. DOI:10.1016/j.cep.2019.107533.
   Web of Science ®Google Scholar
• H. Bas and V. Ozceyhan, “Heat transfer enhancement in a tube with twisted tape inserts placed separately from the tube wall,” Exp. Therm. Fluid Sci., vol. 41, pp. 51–58, 2012. DOI: 10.1016/j.expthermflusci.2012.03.008.
   Web of Science ®Google Scholar
• R. M. Sarviya and V. Fuskele, “Heat transfer and pressure drop in a circular tube fitted with twisted tape insert having continuous cut edges,” J. Energy Storage, vol. 19, pp. 10–14, 2018. DOI: 10.1016/j.est.2018.07.001.
   Web of Science ®Google Scholar
• V. Reddy, S. Kumar, R. Gugulothu, K. Anuja, and V. Rao, “CFD analysis of a helically coiled tube in tube heat exchanger,” Sci. Direct Mater. Today: Proc., vol. 4, pp. 2341–2349, 2017.
   Google Scholar
• E. Gholamalizadeh, et al., “Study of intensification of the heat transfer in helically coiled tube heat exchanger via coiled wire inserts,” Int. J. Therm. Sci., vol. 141, pp. 72–83, 2019. DOI: 10.1016/j.ijthermalsci.2019.03.029.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, P. Nivesrangsan, S. Chokphoemphun, and P. Promvonge, “Influence of combined non-uniform wire coil and twisted tape inserts on thermal performance characteristics,” Int. Commun. Heat Mass Transfer, vol. 37, pp. 850–856, 2010. DOI: 10.1016/j.icheatmasstransfer.2010.05.012.
   Web of Science ®Google Scholar
• V. Kongkaitpaiboon, K., . Nanan, and S. Eiamsa-ard, “Experimental investigation of convective heat transfer and pressure loss in a round tube fitted with circular-ring turbulators,” Int. Commun. Heat Mass Transfer, vol. 37, pp. 568–574, 2010. DOI: 10.1016/j.icheatmasstransfer.2009.12.016.
   Web of Science ®Google Scholar
• S. Singh, J. Negi, S. Bisht, and H. Sah, “Thermal performance and frictional losses study of solid hollow circular disc with rectangular wings in circular tube,” Heat Mass Transfer, vol. 55, pp. 2975–2986, 2019. DOI: 10.1007/s00231-019-02631-z.
   Web of Science ®Google Scholar
• S. Singh, L. Pandey, H. Kharkwal, and H. Sah, “Augmentation of thermal performance of heat exchanger using elliptical and circular insert with vertical twisted tape,” Exp. Heat Transfer, pp. 1–16, 2019. DOI: 10.1080/08916152.2019.1662856.
   Web of Science ®Google Scholar
• Y. Zong, D. Bai, M. Zhou, and L. Zhao, “Numerical studies on heat transfer enhancement by hollow-cross disk for cracking coils,” Chem. Eng. Process: Process Intensif., vol. 135, pp. 82–92, 2019. DOI: 10.1016/j.cep.2018.11.007.
   Web of Science ®Google Scholar
• S. Hossain, U. Dev, and K. Rahman, “The enhancement in circular tube with insert and without insert by using finite element method,” Procedia Eng., vol. 105, pp. 81–88, 2015. DOI: 10.1016/j.proeng.2015.05.010.
   Google Scholar
• P. K. Nagarajan and P. Sivashanmugam, “Heat transfer enhancement studies in a circular tube fitted with right-left helical inserts with spacer, world academy of science, engineering and technology, international,” J. Mech. Mechatron. Eng., vol. 5, pp. 2091–2095, 2011.
   Google Scholar
• S. Huang, H. Chen, X. Zhang, Z. Wan, and Y. Tang, “Experimental evaluation of thermal performance in a circular tube with Y- branch insert,” Int. Commun. Heat Mass Transfer, vol. 106, pp. 15–21, 2019. DOI: 10.1016/j.icheatmasstransfer.2019.04.004.
   Web of Science ®Google Scholar
• S. Karagoz, F. Afshari, O. Yildirim, and O. Comakli, “Experimental and numerical investigation of the cylindrical blade tube inserts effect on the heat transfer enhancement in the horizontal pipe exchangers,” Heat Mass Transfer, vol. 53, pp. 2769–2784, 2017. DOI: 10.1007/s00231-017-2021-8.
   Web of Science ®Google Scholar
• W. Tu, Y. Tang, J. Hu, Q. Wang, and L. Lu, “Heat transfer and friction characteristics of laminar flow through a circular tube with small pipe inserts,” Int. J. Therm. Sci., vol. 96, pp. 94–101, 2015. DOI: 10.1016/j.ijthermalsci.2015.04.013.
   Web of Science ®Google Scholar
• F. Xin, Z. Liu, N. Zheng, P. Liu, and W. Liu, “Numerical study on flow characteristics and heat transfer enhancement of oscillatory flow in a spirally corrugated tube,” Int. J. Heat Mass Transfer, vol. 127, pp. 402–413, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.06.139.
   Web of Science ®Google Scholar
• N. Zheng, et al., “Numerical simulation and optimization of heat transfer enhancement in a heat exchanger tube fitted with vortex rod inserts,” Appl. Therm. Eng., vol. 123, pp. 471–484, 2017. DOI: 10.1016/j.applthermaleng.2017.05.112.
   Web of Science ®Google Scholar
• S. Xie, Z. Liang, L. Zhang, and Y. Wang, “A numerical study on heat transfer enhancement and flow structure in enhanced tube with cross ellipsoidal dimples,” Int. J. Heat Mass Transfer, vol. 125, pp. 434–444, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.04.106.
   Web of Science ®Google Scholar
• A. Kumar, S. Singh, S. Chamoli, and M. Kumar, “Experimental investigation on thermo-hydraulic performance of heat exchanger tube with solid and perforated circular disk along with twisted tape inserts,” Heat Transfer Eng., vol. 40:8, pp. 616–626, 2019. DOI: 10.1080/01457632.2018.1436618.
   Web of Science ®Google Scholar
• N. Piriyarungrod, et al., “Intensification of thermo-hydraulic performance in heat exchanger tube inserted with multiple twisted-tapes,” Appl. Therm. Eng., vol. 36, pp. 516–530, 2018. DOI: 10.1016/j.applthermaleng.2018.02.097.
   Web of Science ®Google Scholar
• K. Ruengpayungsak, M. Kumar, V. Chuwattanakul, and S. Eiamsa-ard, “Experimental study of the effects of inclusion of rectangular cut twisted tapes on heat transfer and pressure drop in a round tube,” Arabian J. Sci. Eng., vol. 44, pp. 10303–10312, 2019. DOI: 10.1007/s13369-019-04047-7.
   Web of Science ®Google Scholar
• A. Kumar, M. Kumar, and S. Chamoli, “Comparative study of thermal- hydraulic performance of circular tube with inserts,” Alexandria Eng. J., vol. 55, no. 1, pp.343–349, 2016. DOI: 10.1016/j.aej.2015.12.013.
   Web of Science ®Google Scholar
• B. Kumar, G. Srivastava, A. Patil, and M. Kumar, “A review of heat transfer and fluid flow mechanism in heat exchanger tube with inserts,” Chem. Eng. Process.: Process Intensif., vol. 123, pp. 126–137, 2018. DOI: 10.1016/j.cep.2017.11.007.
   Web of Science ®Google Scholar
• H. Umur, O. Yemenici, Y. Umur, and A. Sakin, “Flow and heat transfer characteristics over rectangular blocked surfaces,” Exp. Heat Transfer, vol. 30, pp. 192–204, 2017. DOI: 10.1080/08916152.2016.1233146.
   Web of Science ®Google Scholar
• R. Maithani and A. Kumar, “Correlations development for Nusselt number and friction factor in a dimpled surface heat exchanger tube,” Exp. Heat Transfer, pp. 1–22, 2019. DOI: 10.1080/08916152.2019.1573863.
   Web of Science ®Google Scholar
• X. Tian, et al., “Effects of fin pitch and tube diameter on the air-side performance of tube bank fin heat exchanger with the fins punched plane and curved rectangular vortex generators,” Exp. Heat Transfer, vol. 31, pp. 297–316, 2018. DOI: 10.1080/08916152.2017.1410503.
   Web of Science ®Google Scholar
• R. L. Webb and N. H. Kim, Principles of Enhanced Heat Transfer, second ed. New York: Taylor& Francis Group, 2005.
   Google Scholar
• A. Kumar, S. Chamoli, and M. Kumar, “Experimental investigation on thermal performance and fluid flow characteristics in heat exchanger tube with solid hollow circular disk inserts,” Appl. Therm. Eng., vol. 100, pp. 227–236, 2016. DOI: 10.1016/j.applthermaleng.2016.01.081.
   Web of Science ®Google Scholar
• P. Promvonge, N. Koolnapadol, M. Pimsarn, and C. Thianpong, “Thermal performance enhancement in a heat exchanger tube fitted with inclined vortex rings,” Appl. Therm. Eng., vol. 62, pp. 285–292, 2014. DOI: 10.1016/j.applthermaleng.2013.09.031.
   Web of Science ®Google Scholar
• M. M. K. Bhuiya, A. S. M. Sayema, M. Islam, M. S. U. Chowdhury, and M. Shahabuddine, “Performance assessment in a heat exchanger tube fitted with double counter twisted tape inserts,” Int. Commun. Heat Mass Transfer, vol. 50, pp. 25–33, 2014. DOI: 10.1016/j.icheatmasstransfer.2013.11.005.
   Web of Science ®Google Scholar
• S. Eiamsa-ard and P. Promvonge, “Influence of double-sided delta-wing tape insert with alternate-axes on flow and heat transfer characteristics in a heat exchanger tube, fluid flow and transport phenomena,” Chin. J. Chem. Eng., vol. 19, pp. 410–423, 2011. DOI: 10.1016/S1004-9541(11)60001-3.
   Web of Science ®Google Scholar
• A. Gautam, L. Pandey, and S. Singh, “Influence of perforated triple wing vortex generator on a turbulent flow through a circular tube,” Heat Mass Transfer, vol. 54, pp. 2009–2021, 2018. DOI:10.1007/s00231-018-2296-4.
   Web of Science ®Google Scholar