Thermal performance escalation of cross flow heat exchanger using in-line elliptical tubes

References

• S. Aiba, H. Tsuchida, and O. Terukazu, “Heat transfer around tubes in staggered tube banks,” Bull. JSME, vol. 25, pp. 927–933, 1982. DOI: 10.1299/jsme1958.25.927.
   Google Scholar
• O. Terukazu, N. Hideya, and T. Yukiyasu, “Heat transfer and flow around an elliptic cylinder,” Int. J. Heat Mass Transfer, vol. 27, pp. 1771–1779, 1984. DOI:10.1016/0017-9310(84)90159-5.
   Web of Science ®Google Scholar
• Y. Chen, M. Fiebig, and N. K. Mitra, “conjugate heat transfer of a finned oval tube part a: Flow patterns,” Numer. Heat Transfer, Part A, vol. 33, pp. 371–385, 1998. DOI:10.1080/10407789808913944.
   Web of Science ®Google Scholar
• R. Matos, J. V. Vargas, T. Laursen, and F. E. Saboya, “Optimization study and heat transfer comparison of staggered circular and elliptic tubes in forced convection,” Int. J. Heat Mass Transfer, vol. 44, pp. 3953–3961, 2001. DOI:10.1016/S0017-9310(01)00006-0.
   Web of Science ®Google Scholar
• R. S. Matos, T. A. Laursen, J. V. C. Vargas, and A. Bejan, “Three-dimensional optimization of staggered finned circular and elliptic tubes in forced convection,” Int. J. Therm. Sci., vol. 43, pp. 477–487, 2004. DOI:10.1016/j.ijthermalsci.2003.10.003.
   Web of Science ®Google Scholar
• S. M. Saboya and F. E. M. Saboya, “Experiments on elliptic sections in one-and two-row arrangements of plate fin and tube heat exchangers,” Exp. Therm. Fluid Sci., vol. 24, pp. 67–75, 2001. DOI:10.1016/S0894-1777(00)00059-5.
   Web of Science ®Google Scholar
• S. Caliskan, A. Dogan, and I. Kotcioglu, “Experimental investigation of heat transfer from different pin fin in a rectangular channel,” Exp. Heat Transfer, vol. 32, pp. 376–392, 2019. DOI:10.1080/08916152.2018.1526228.
   Web of Science ®Google Scholar
• V. Marțian, S. Albețel, E. David, and M. Nagi, “Heat transfer and hydraulic performance models for a family of aluminum plate heat exchanger with transversal offset strip fins,” Exp. Heat Transfer, vol. 30, pp. 530–543, 2017. DOI:10.1080/08916152.2017.1315467.
   Web of Science ®Google Scholar
• S. Tiwari, D. Maurya, G. Biswas, and V. Eswaran, “Heat transfer enhancement in cross-flow heat exchangers using oval tubes and multiple delta winglets,” Int. J. Heat Mass Transfer, vol. 46, pp. 2841–2856, 2003. DOI:10.1016/S0017-9310(03)00047-4.
   Web of Science ®Google Scholar
• S. A. Johnson, M. C. Thompson, and K. Hourigan, “Predicted low frequency structures in the wake of elliptical cylinders,” Eur. J. Mech. B. Fluids, vol. 23, pp. 229–239, 2004. DOI:10.1016/j.euromechflu.2003.05.006.
   Web of Science ®Google Scholar
• I. Kotcioglu and A. Cansiz, “The efficiency analysis of a finned cross-flow heat recovery unit,” Exp. Heat Transfer, vol. 28, pp. 9–22, 2015. DOI:10.1080/08916152.2013.803172.
   Web of Science ®Google Scholar
• D. Junqi, Z. Yi, L. Gengtian, and X. Weiwu, “Experimental study of wavy fin aluminum plate fin heat exchanger,” Exp. Heat Transfer, vol. 26, pp. 384–396, 2013. DOI:10.1080/08916152.2012.694010.
   Web of Science ®Google Scholar
• Z. Li, J. H. Davidson, and S. C. Mantell, “Numerical simulation of flow field and heat transfer of streamlined cylinders in cross flow,” J. Heat Transfer, vol. 128, pp. 564, 2006. DOI:10.1115/1.2188463.
   Web of Science ®Google Scholar
• A. Mirabdolah Lavasani, H. Bayat, and T. Maarefdoost, “Experimental study of convective heat transfer from in-line cam shaped tube bank in crossflow,” Appl. Therm. Eng., vol. 65, pp. 85–93, 2014. DOI:10.1016/j.applthermaleng.2013.12.078.
   Web of Science ®Google Scholar
• L. B. Wang, F. Ke, S. D. Gao, and Y. G. Mei, “Local and average characteristics of heat/mass transfer over flat tube bank fin with four vortex generators per tube,” J. Heat Transfer, vol. 124, pp. 546, 2002. DOI:10.1115/1.1423905.
   Web of Science ®Google Scholar
• H. M. S. Bahaidarah, N. K. Anand, and H. C. Chen, “A numerical study of fluid flow and heat transfer over a bank of flat tubes,” Numer. Heat Transfer, Part A, vol. 48, pp. 359–385, 2005. DOI:10.1080/10407780590957134.
   Web of Science ®Google Scholar
• L. M. Chang, L. B. Wang, K. W. Song, D. L. Sun, and J. F. Fan, “Numerical study of the relationship between heat transfer enhancement and absolute vorticity flux along main flow direction in a channel formed by a flat tube bank fin with vortex generators,” Int. J. Heat Mass Transfer, vol. 52, pp. 1794–1801, 2009. DOI:10.1016/j.ijheatmasstransfer.2008.09.029.
   Web of Science ®Google Scholar
• S. E. Sayed Ahmed, E. Z. Ibrahiem, O. M. Mesalhy, and M. A. Abdelatief, “Effect of attack and cone angels on air flow characteristics for staggered wing shaped tubes bundle,” Heat Mass Transfer/Waerme- Und Stoffuebertragung, vol. 51, pp. 1001–1016, 2015. DOI:10.1007/s00231-014-1473-3.
   Web of Science ®Google Scholar
• Y. B. Tao, Y. L. He, Z. G. Wu, and W. Q. Tao, “Three-dimensional numerical study and field synergy principle analysis of wavy fin heat exchangers with elliptic tubes,” Int. J. Heat Fluid Flow, vol. 28, pp. 1531–1544, 2007. DOI:10.1016/j.ijheatfluidflow.2007.02.001.
   Web of Science ®Google Scholar
• T. A. Ibrahim and A. Gomaa, “Thermal performance criteria of elliptic tube bundle in crossflow,” Int. J. Therm. Sci., vol. 48, pp. 2148–2158, 2009. DOI:10.1016/j.ijthermalsci.2009.03.011.
   Web of Science ®Google Scholar
• E. M. Alawadhi, “Laminar forced convection flow past an in-line elliptical cylinder array with inclination,” J. Heat Transfer, vol. 132, pp. 071701, 2010. DOI:10.1115/1.4000061.
   Web of Science ®Google Scholar
• X. P. Du, M. Zeng, Z. Y. Dong, and Q. W. Wang, “Experimental study of the effect of air inlet angle on the air-side performance for cross-flow finned oval-tube heat exchangers,” Exp. Therm. Fluid Sci., vol. 52, pp. 146–155, 2014. DOI:10.1016/j.expthermflusci.2013.09.005.
   Web of Science ®Google Scholar
• L. Cattafesta, C. Bahr, and J. Mathew, “Fundamentals of wind-tunnel design,” Encycl. Aerosp. Eng., 2010. DOI: 10.1002/9780470686652.eae532.
   Google Scholar
• Z. Faruquee, D. S. K. Ting, A. Fartaj, R. M. Barron, and R. Carriveau, “The effects of axis ratio on laminar fluid flow around an elliptical cylinder,” Int. J. Heat Fluid Flow, vol. 28, pp. 1178–1189, 2007. DOI:10.1016/j.ijheatfluidflow.2006.11.004.
   Web of Science ®Google Scholar
• R. D. Mehta and P. Bradshaw, “Design rules for small low sped wind turbines,” Aeronaut. J., vol. 83, pp. 443–453, 1979.
   Web of Science ®Google Scholar
• A. Quarmby and A. Alfarhri, “Effect of finite length on forced convection heat transfer from cylinders,” Int. J. Heat Mass Transfer, vol. 23, pp. 463–469, 1980. DOI:10.1016/0017-9310(80)90088-5.
   Web of Science ®Google Scholar
• F. Incropera, D. Dewitt, T. Bergman, and A. Lavine, Fundamentals of Heat and Mass Transfer, Sixth ed. Los Angeles, California: JOHN WILEY & SONS, 2007.
   Google Scholar
• S. M. Huang, M. Yang, Y. Yang, and X. Yang, “Fluid flow and heat transfer across an elliptical hollow fiber membrane tube bank for air humidification,” Int. J. Therm. Sci., vol. 73, pp. 28–37, 2013. DOI:10.1016/j.ijthermalsci.2013.05.013.
   Web of Science ®Google Scholar
• H. M. Ali, H. Ali, H. Liaquat, H. T. Bin Maqsood, and M. A. Nadir, “Experimental investigation of convective heat transfer augmentation for car radiator using ZnO-water nanofluids,” Energy, vol. 84, pp. 317–324, 2015. DOI:10.1016/j.energy.2015.02.103.
   Web of Science ®Google Scholar
• D. D. Ndenguma, J. Dirker, and J. P. Meyer, “Heat transfer and pressure drop in annuli with approximately uniform internal wall temperatures in the transitional flow regime,” Int. J. Heat Mass Transfer, vol. 111, pp. 429–441, 2017. DOI:10.1016/j.ijheatmasstransfer.2017.02.064.
   Web of Science ®Google Scholar
• A. Joardar and A. M. Jacobi, “A numerical study of flow and heat transfer enhancement using an array of delta-winglet vortex generators in a fin-and-tube heat exchanger,” J. Heat Transfer, vol. 129, pp. 1156, 2007. DOI:10.1115/1.2740308.
   Web of Science ®Google Scholar
• L. Tian, Y. He, Y. Tao, and W. Tao, “A comparative study on the air-side performance of wavy fin-and-tube heat exchanger with punched delta winglets in staggered and in-line arrangements,” Int. J. Therm. Sci., vol. 48, pp. 1765–1776, 2009. DOI:10.1016/j.ijthermalsci.2009.02.007.
   Web of Science ®Google Scholar
• L. Tian, Y. He, P. Chu, and W. Tao, “Numerical study of flow and heat transfer enhancement by using delta winglets in a triangular wavy fin-and-tube heat exchanger,” J. Heat Transfer, vol. 131, pp. 091901, 2009. DOI:10.1115/1.3139106.
   Web of Science ®Google Scholar
• R. L. Webb, E. R. G. Eckert, and R. J. Goldstein, “Heat transfer and friction in tubes with repeated rib roughness,” Int. J. Heat Mass Transfer, vol. 14, pp. 601–617, 1971. DOI: 10.1016/0017-9310(71)90009-3.
   Web of Science ®Google Scholar
• S. J. Kline and F. A. McClintock, “Describing uncertainties in single-sample experiments,” Mech. Eng., vol. 75, pp. 3–8, 1953.
   Google Scholar
• H. M. Ali and A. Briggs, “Condensation heat transfer on pin-fin tubes: Effect of thermal conductivity and pin height,” Appl. Therm. Eng., vol. 60, pp. 465–471, 2012. DOI:10.1016/j.applthermaleng.2012.08.020.
   Web of Science ®Google Scholar
• N. S. Berbish, “Heat transfer and flow behavior around four staggered elliptic cylinders in cross flow,” Heat Mass Transfer/Waerme- Und Stoffuebertragung, vol. 47, pp. 287–300, 2011. DOI:10.1007/s00231-010-0719-y.
   Web of Science ®Google Scholar
• V. Kumar, B. Faizee, M. Mridha, and K. D. P. Nigam, “Numerical studies of a tube-in-tube helically coiled heat exchanger,” Chem. Eng. Process. Process Intensif., vol. 47, pp. 2287–2295, 2008. DOI:10.1016/j.cep.2008.01.001.
   Web of Science ®Google Scholar
• I. F. Okafor, J. Dirker, and J. P. Meyer, “Influence of non-uniform heat flux distributions on the secondary flow, convective heat transfer and friction factors for a parabolic trough solar collector type absorber tube,” Renewable Energy, vol. 108, pp. 287–302, 2017. DOI:10.1016/j.renene.2017.02.053.
   Web of Science ®Google Scholar
• F. R. Menter, “Two-equation eddy viscosity turbulence model for engineering applications,” AIAA, vol. 8, pp. 1498–1605, 1994.
   Google Scholar
• J. M. Park, O. J. Kim, S. J. Kim, and Y.-C. Shin, “Heat transfer characteristics of circular and elliptic cylinders in cross flow,” Adv. Mech. Eng., vol. 7, pp. 1–8, 2015. DOI:10.1177/1687814015619553.
   Web of Science ®Google Scholar
• V. B. Gawande, A. S. Dhoble, D. B. Zodpe, and S. Chamoli, “Experimental and CFD-based thermal performance prediction of solar air heater provided with right-angle triangular rib as artificial roughness,” J. Braz. Soc. Mech. Sci. Eng., vol. 38, pp. 551–579, 2016. DOI:10.1007/s40430-015-0391-8.
   Web of Science ®Google Scholar
• V. B. Gawande, A. S. Dhoble, D. B. Zodpe, and S. Chamoli, “Experimental and CFD-based thermal performance prediction of solar air heater provided with chamfered square rib as artificial roughness,” J. Braz. Soc. Mech. Sci. Eng., vol. 38, pp. 643–663, 2016. DOI:10.1007/s40430-015-0402-9.
   Web of Science ®Google Scholar