Experimental study on transient heat transfer characteristics of intermittent spray cooling

References

• J.-X. Wang et al., “Investigation of heat transfer mechanism of low environmental pressure large-space spray cooling for near-space flight systems,” Int. J. Heat Mass Transf., vol. 119, pp. 496–507, 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.11.128.
   Web of Science ®Google Scholar
• M. Anderson, E. Golliher, T. Leimkuehler, and G. Quinn. “Preliminary trade study of evaporative heat sinks,” SAE Int., 2006. DOI: 10.4271/2006-01-2216.
   Google Scholar
• E. W. O’Connor, J. J. Zampiceni, N. F. Cerna, and M. J. Fuller. “Orbiter flash evaporator: flight experience and improvements,” SAE Int., 1997. DOI: 10.4271/972262.
   Google Scholar
• X. Gao and R. Li, “Effects of nozzle positioning on single-phase spray cooling,” Int. J. Heat Mass Transf., vol. 115, pp. 1247–1257, 2017. DOI:10.1016/j.ijheatmasstransfer.2017.08.095.
   Web of Science ®Google Scholar
• Sabariman and E. Specht, “Characterization of the boiling width on metal quenching with spray cooling,” Exp. Heat Transf., vol. 31, no. 5, pp. 391–404, 2018. DOI: 10.1080/08916152.2018.1431737.
   Web of Science ®Google Scholar
• N. H. Bhatt et al., “Role of water temperature in case of high mass flux spray cooling of a hot AISI 304 steel plate at different initial surface temperatures,” Exp. Heat Transf., vol. 30, no. 5, pp. 369–392, 2017. DOI: 10.1080/08916152.2016.1269138.
   Web of Science ®Google Scholar
• Z.-F. Zhou, B. Chen, R. Wang, and G.-X. Wang, “Comparative investigation on the spray characteristics and heat transfer dynamics of pulsed spray cooling with volatile cryogens,” Exp. Therm. Fluid Sci., vol. 82, pp. 189–197, 2017. DOI:10.1016/j.expthermflusci.2016.11.016.
   Web of Science ®Google Scholar
• G. Liang and I. Mudawar, “Review of spray cooling – part 1: single-phase and nucleate boiling regimes, and critical heat flux,” Int. J. Heat Mass Transf., vol. 115, pp. 1174–1205, 2017. DOI:10.1016/j.ijheatmasstransfer.2017.06.029.
   Web of Science ®Google Scholar
• G. Liang and I. Mudawar, “Review of spray cooling – part 2: high temperature boiling regimes and quenching applications,” Int. J. Heat Mass Transf., vol. 115, pp. 1206–1222, 2017. DOI:10.1016/j.ijheatmasstransfer.2017.06.022.
   Web of Science ®Google Scholar
• M. R. O. Panão, A. M. Correia, and A. L. N. Moreira, “High-power electronics thermal management with intermittent multijet sprays,” Appl. Therm. Eng., vol. 37, no. 5, pp. 293–301, 2012. DOI: 10.1016/j.applthermaleng.2011.11.031.
   Google Scholar
• S. Somasundaram and A. A. O. Tay, “An experimental study of closed loop intermittent spray cooling of ICs,” Appl. Therm. Eng., vol. 31, no. 14–15, pp. 2321–2331, 2011. DOI: 10.1016/j.applthermaleng.2011.03.030.
   Web of Science ®Google Scholar
• S. Somasundaram and A. A. O. Tay, “Comparative study of intermittent spray cooling in single and two phase regimes,” Int. J. Therm. Sci., vol. 74, no. C, pp. 174–182, 2013. DOI: 10.1016/j.ijthermalsci.2013.06.008.
   Google Scholar
• C. Wang, Y. Song, and P. Jiang, “Modelling of liquid nitrogen spray cooling in an electronic equipment cabin under low pressure,” Appl. Therm. Eng., vol. 136, pp. 319–326, 2018. DOI:10.1016/j.applthermaleng.2018.02.095.
   Web of Science ®Google Scholar
• Z. Zhang, P. X. Jiang, Y. T. Hu, and J. Li, “Experimental investigation of continual- and intermittent-spray cooling,” Exp. Heat Transf., vol. 26, no. 5, pp. 453–469, 2013. DOI: 10.1080/08916152.2012.719063.
   Web of Science ®Google Scholar
• N. Liu, Z. Yu, Y. Liang, and H. Zhang, “Effects of mixed surfactants on heat transfer performance of pulsed spray cooling,” Int. J. Heat Mass Transf., vol. 144, pp. 118593, 2019. DOI:10.1016/j.ijheatmasstransfer.2019.118593.
   Web of Science ®Google Scholar
• X. Zhao, B. Zhang, Z. Yang, and Y. Zhao, “Surface orientation effects on heat transfer performance of spray cooling,” Int. J. Heat Mass Transf., vol. 147, pp. 118960, 2020. DOI:10.1016/j.ijheatmasstransfer.2019.118960.
   Web of Science ®Google Scholar
• J.-M. Tian, B. Chen, D. Li, and Z.-F. Zhou, “Transient spray cooling: similarity of dynamic heat flux for different cryogens, nozzles and substrates,” Int. J. Heat Mass Transf., vol. 108, pp. 561–571, 2017. DOI:10.1016/j.ijheatmasstransfer.2016.12.055.
   Web of Science ®Google Scholar
• A. L. N. Moreira and M. R. O. Panão, “Heat transfer at multiple-intermittent impacts of a hollow cone spray,” Int. J. Heat Mass Transf., vol. 49, no. 21–22, pp. 4132–4151, 2006. DOI: 10.1016/j.ijheatmasstransfer.2006.04.004.
   Web of Science ®Google Scholar
• X. Zhao, B. Zhang, X. Xi, and Z. Yin, “Analysis and prediction of single-phase and two-phase cooling characteristics of intermittent sprays,” Int. J. Heat Mass Transf., vol. 133, pp. 619–630, 2019. DOI:10.1016/j.ijheatmasstransfer.2018.12.146.
   Web of Science ®Google Scholar
• A. R. Pati and S. S. Mohapatra, “The effect of oxide layer in case of novel coolant spray at very high initial surface temperature,” Exp. Heat Transf., vol. 32, no. 2, pp. 116–132, 2019. DOI: 10.1080/08916152.2018.1485784.
   Web of Science ®Google Scholar
• J. Beck and K. Woodbury, Inverse Engineering Handbook. Boca Raton, FL: CRC, 2002.
   Google Scholar
• X. Zhao, Y. Zhao, Z. Yin, and B. Zhang, “Verification of sequential function specification method with intermittent spray cooling,” Inverse Probl. Sci. Eng., pp. 1–20, 2019. DOI: 10.1080/17415977.2019.1685513.
   Web of Science ®Google Scholar
• J. M. Jha et al., “Heat transfer from a hot moving steel plate by using Cu-Al layered double hydroxide nanofluid based air atomized spray,” Exp. Heat Transf., vol. 30, no. 6, pp. 500–516, 2017. DOI: 10.1080/08916152.2017.1312638.
   Web of Science ®Google Scholar
• X. Zhao, Z. Yin, B. Zhang, and Z. Yang, “Experimental investigation of surface temperature non-uniformity in spray cooling,” Int. J. Heat Mass Transf., vol. 146, pp. 118819, 2020. DOI:10.1016/j.ijheatmasstransfer.2019.118819.
   Web of Science ®Google Scholar
• R. J. Moffat, “Describing the uncertainties in experimental results,” Exp. Therm. Fluid Sci., vol. 1, no. 1, pp.3–17, 1988. DOI: 10.1016/0894-1777(88)90043-X.
   Web of Science ®Google Scholar
• C. Sodtke and P. Stephan, “Spray cooling on micro structured surfaces,” Int. J. Heat Mass Transf., vol. 50, no. 19, pp. 4089–4097, 2007. DOI: 10.1016/j.ijheatmasstransfer.2006.12.037.
   Web of Science ®Google Scholar
• K. A. Estes and I. Mudawar, “Correlation of sauter mean diameter and critical heat flux for spray cooling of small surfaces,” Int. J. Heat Mass Transf., vol. 38, no. 16, pp. 2985–2996, 1995. DOI: 10.1016/0017-9310(95)00046-C.
   Web of Science ®Google Scholar
• Z. Zhou et al., “An experimental study on pulsed spray cooling with refrigerant R-404a in laser surgery,” Appl. Therm. Eng., vol. 39, pp. 29–36, 2012. DOI: 10.1016/j.applthermaleng.2012.01.028.
   Web of Science ®Google Scholar