References
- L. D. Hylton, M. S. Mihelc, E. R. Turner, and R. E. York, Experimental Investigation of Turbine Endwall Heat Transfer, AFWAL-TR-81-2077, Vols. 1–3, 1981. OHIO: Aero Propulsion Labs, Wright Patterson Air Force Base.
- R. E. York, L. D. Hylton, and M. S. Mihelc, “An experimental investigation of endwall heat transfer and aerodynamics in a linear vane cascade,” J. Eng. Gas Turbine Power, vol. 106, no. 1, pp.159–167, 1984. DOI: https://doi.org/10.1115/1.3239529.
- R. J. Goldstein and R. A. Spores, “Turbulent transport on an endwallin the region between adjacent turbine blades,” ASME J. Heat Transfer, vol. 110, no. 4a, pp.862–869, 1988. DOI: https://doi.org/10.1115/1.3250586.
- R. S. Bunker, “A review of turbine blade tip heat transfer,” Annu. N.Y. Acad. Sci., vol. 934, no. 1, pp.64–79, 2001. DOI: https://doi.org/10.1111/j.1749-6632.2001.tb05843.x.
- M., . K. Chyu, “Heat transfer near turbine nozzle endwall,” Annu. N.Y. Acad. Sci., vol. 934, no. 1, pp.27–36, 2001. DOI: https://doi.org/10.1111/j.1749-6632.2001.tb05840.x.
- R. E. Gaugler and L. M. Russell, “Comparison of visualized turbine endwall secondary flows and measured heat transfer patterns,” J. Eng. Gas Turbines Power, vol. 106, no. 1, pp.168–172, 1984. DOI: https://doi.org/10.1115/1.3239530.
- M. B. Kang, A. Kohli, and K. A. Thole, “Heat transfer and flowfield measurements in the leading Edge region of a stator Vane Endwall,” J. Turbomach., vol. 121, no. 3, pp.558–568, 1999. DOI: https://doi.org/10.1115/1.2841351.
- F. E. Ames, P. A. Barbot, and C. Wang, “Effects of aeroderivative combustor turbulence on endwall heat transfer distributions acquired in a linear vane cascade,” J. Turbomach., vol. 125, no. 2, pp.210–220, 2003. DOI: https://doi.org/10.1115/1.1559897.
- R. A. Graziani, M. F. Blair, J. R. Taylor, and R. E. Mayle, “An experimental study of endwall and airfoil surface heat transfer in a large scale turbine blade cascade,” J. Eng. Power, vol. 102, no. 2, pp.257–267, 1980. DOI: https://doi.org/10.1115/1.3230246.
- S. M. Choi, J. S. Park, H. Chung, S. Park, and H. H. Cho, “Upstream wake effect on flow and heat transfer characteristics at an endwall of first-stage blade of a gas turbine,” Exp. Therm. Fluid Sci., vol. 86, pp. 23–36, 2017. DOI: https://doi.org/10.1016/j.expthermflusci.2017.03.030.
- M. Y. Jabbari, K. C. Marston, E. R. G. Eckert, and R. J. Goldstein, “Film cooling of the gas turbine endwall by discrete-hole injection, ASME Turbo EXPO 1994,” ASME Paper 94-GT–67, 1994.
- S. Friedrichs, H. P. Hodson, and W. N. Dawes, “Distribution of film-cooling effectiveness on a turbine endwall measured using the ammonia and diazo technique, ASME Turbo EXPO1995,” ASME Paper 95-GT–1, 1995.
- M. F. Blair, “An experimental study of heat transfer and film cooling on large-scale turbine endwalls,” J. Heat Transfer, vol. 96, no. 4, pp.524–529, 1974. DOI: https://doi.org/10.1115/1.3450239.
- K. Takeishi, M. Matsuura, S. Aoki, and T. Sato, “An experimental study of heat Transf4er and film cooling on low aspect ratio turbine nozzles,” ASME J. Turbomach., vol. 112, no. 3, pp.488–496, 1990. DOI: https://doi.org/10.1115/1.2927684.
- S. Friedrichs, H. P. Hodson, and W. N. Dawes, “The design of an improved endwall film-cooling configuration, ASME Turbo Expo 1998,” ASME Paper 98-GT–483, 1998.
- S. Rakhsha, M. Rajabi Zargarabadi, and S. Saedodin, “Experimental and numerical study of flow and heat transfer from a pulsed jet impinging on a pinned surface,” Exp. Heat Transfer, pp. 1–16, 2020. DOI: https://doi.org/10.1080/08916152.2020.1755388.
- S. C. Godi, S. Abraham, A. Pattamatta, and C. Balaji, “Evaluation of candidate strategies for the estimation of local heat transfer coefficient from wall jets,” Exp. Heat Transfer, vol. 33, no. 1, pp.40–63, 2020. DOI: https://doi.org/10.1080/08916152.2019.1570983.
- B. Lu, W. Peng, P.-X. Jiang, J. Wang, and Y.-P. Wang, “Experimental and numerical study of the effect of conjugate heat transfer on film cooling,” Exp. Heat Transfer, vol. 30, no. 4, pp.355–368, 2017. DOI: https://doi.org/10.1080/08916152.2017.1283374.
- A. Steurer, S., . I. Benton, and J. P. Bons, “Effect of endwall boundary layer thickness on losses in a LPT cascade with unsteady wakes, ASME Turbo Expo 2014,” GT2014–26921, 2014.
- Z. Li, L. Liu, and J. Li, “Effects of upstream step geometry on axisymmetric converging vane endwall secondary flow and heat transfer at transonic conditions, ASME Turbo Expo 2018,” GT2018–76236, 2018.
- S. P. Lynch and K. A. Thole, “The effect of the combustor-turbine slot and midpassage gap on vane endwall heat transfer,” J. Turbomach., vol. 133, no. 4, pp.041002, 2011. DOI: https://doi.org/10.1115/1.4002950.
- D. Ambrose, I. J. Lawrenson, and C. H. S. Sparke, “The vapor pressure of Naphthalene,” J. Chem. Thermodyn., vol. 7, no. 12, pp.1173–1176, 1975. DOI: https://doi.org/10.1016/0021-9614(75)90038-5.
- R. J. Goldstein and H. H. Cho, “A review of mass transfer measurements using Naphthalene sublimation,” Exp. Therm. Fluid Sci., vol. 10, no. 4, pp.416–434, 1995. DOI: https://doi.org/10.1016/0894-1777(94)00071-F.
- R. J. Moffat, “Describing the uncertainties in experimental results,” Exp. Therm. Fluid Sci., vol. 1, no. 1, pp.3–17, 1988. DOI: https://doi.org/10.1016/0894-1777(88)90043-X.