References
- S. V. Garimella, “Advances in mesoscale thermal management technologies for microelectronics,” Microelectron J., vol. 37, pp. 1165–1185, 2006. DOI: https://doi.org/10.1016/j.mejo.2005.07.017.
- G. Krishan, K. C. Aw, and R. N. Sharma, “Synthetic jet impingement heat transfer enhancement-A review,” App. Therm. Engg., vol. 149, pp. 1305–1323, 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2018.12.134.
- E. Pourfarzad, K. Ghadiri, K. Behrangzade, and M. Ashjaee, “Experimental investigation of heat transfer and pressure drop of alumina-water nanofluids in a porous miniature heat sink,” Exp. Heat Transf., vol. 31, no. 6, pp. 495–512, 2018. DOI: https://doi.org/10.1080/08916152.2018.1451413.
- M. Modak, A. K. Sharma, and S. K. Sahu, “An experimental investigation on heat transfer enhancement in circular jet impingement on hot surface by using Al2O3/water nano-fluids and aqueous high alcohol surfactant solutions,” Exp. Heat Transf., vol. 32, no. 4, pp. 275–296, 2018. DOI: https://doi.org/10.1080/08916152.2017.1381655.
- Y. H. Zhang, J. J. Wei, X. Kong, and L. Guo, “Confined submerged jet impingement boiling of subcooled FC-72 over micro-pin-finned surfaces,” Heat Transf. Engg., vol. 37, no. 3–4, pp.269–278, 2016. DOI: https://doi.org/10.1080/01457632.2015.1052661.
- S. Rakhsha, M. R. Zargarabadi, and S. Saedodin, “Experimental and numerical study of flow and heat transfer from a pulsed jet impinging on a pinned surface,” Exp. Heat Transf., 2020. DOI: https://doi.org/10.1080/08916152.2020.1755388.
- M. Attalla, A. A. A. Samee, and N. N. Salem, “Experimental investigation of heat transfer of impinging jet on a roughened plate by a micro cubic shape,” Exp. Heat Transf., vol. 33, pp. 210–225, 2020. DOI: https://doi.org/10.1080/08916152.2019.1614113.
- O. Zeitoun, M. Ali, and H. Al-Ansary, “The effect of particle concentration on cooling of a circular horizontal surface using nanofluid jets,” Nano. Micro. Thermo. Eng., vol. 17, no. 2, pp. 154–171, 2013. DOI: https://doi.org/10.1080/15567265.2012.749963.
- O. Zeitoun and M. Ali, “Nanofluid impingement jet heat transfer,” Nano. Res. Letters, vol. 7, no. 139, pp. 1–13, 2012. http://www.nanoscalereslett.com/content/7/1/139.
- D. S. Kercher, J. B. Lee, O. Brand, and M. G. Allen, “Microjet cooling devices for thermal management of electronics,” IEEE Trans. Comp. Pack. Tech., vol. 26, pp. 359–366, 2003. DOI: https://doi.org/10.1109/TCAPT.2003.815116.
- A. Pavlova and M. Amitay, “Electronic cooling using synthetic jet impingement,” J. Heat Transf., vol. 128, pp. 897–907, 2006. DOI: https://doi.org/10.1115/1.2241889.
- P. K. Singh, S. K. Sahu, P. K. Upadhyay, and A. K. Jain, “Experimental investigation on thermal characteristics of hot surface by synthetic jet impingement,” App. Therm. Engg., vol. 165, pp. 114596, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114596.
- M. Arik, R. Sharma, J. Lustbader, and X. He, “Steady and unsteady air impingement heat transfer for electronics cooling applications,” J. Heat Transf., vol. 135, pp. 111009, 2013. DOI: https://doi.org/10.1115/1.4024614.
- M. B. Gillespie, W. Z. Black, C. Rinehart, and A. Glezer, “Local convective heat transfer from a constant heat flux flat plate cooled by synthetic air jet,” J. Heat Transf., vol. 128, pp. 990–1000, 2006. DOI: https://doi.org/10.1115/1.2345423.
- B. L. Smith and A. Glezer, “The formation and evolution of synthetic jets,” Phy. Fluids, vol. 10, pp. 2281–2297, 1998. DOI: https://doi.org/10.1063/1.869828.
- M. D. Limiya, R. P. Vedula, and S. V. Prabhu, “Influence of the shape of the orifice on the local heat transfer distribution of a flat plate impinged by under-expanded sonic jet,” Exp. Heat Transf., vol. 27, no. 5, pp. 403–427, 2014. DOI: https://doi.org/10.1080/08916152.2013.782378.
- R. Maithani, A. Kumar, G. Raghav, M. Nagpal, and B. Kumar, “Thermal analysis of jet impingement on hemispherical protrusion on heated surface,” Exp. Heat Transf., 2020. DOI: https://doi.org/10.1080/08916152.2020.1808117.
- H. Deng, J. Wang, L. Bai, and J. Zhu, “Heat transfer characteristics in a rotating wedge-shaped ribbed edge with impingement jet,” Exp. Heat Transf., 2020. DOI: https://doi.org/10.1080/08916152.2020.1713256.
- G. Li, L. Zhu, S. Zhang, W. Guo, and Y. Zheng, “Influence of conduction heat loss on enhancing the heat transfer performance of a square flat plate with constant heat flux by an impinging jet in cross-flows,” Exp. Heat Transf., vol. 32, pp. 219–238, 2019. DOI: https://doi.org/10.1080/08916152.2018.1494227.
- J. S. Campbell, W. Black, A. Glezer, and J. Hartley, “Thermal management of a laptop computer with synthetic air microjets,” IEEE, Int. Soc. Confe. Therm Phen, Seattle, USA, 1998, pp. 43–50. doi:https://doi.org/https://doi.org/10.1109/ITHERM.1998.689518
- X. Deng, Z. Luo, Z. Xia, W. Gong, and L. Wang, “Active-passive combined and closed-loop control for the thermal management of high-power LED based on a dual synthetic jet actuator,” Energy Conv. Manage., vol. 132, pp. 207–212, 2017. DOI: https://doi.org/10.1016/j.enconman.2016.11.034.
- R. Mahalingam and A. Glezer, “Design and thermal characteristics of a synthetic jet ejector heat sink,” J. Electron. Pack., vol. 127, pp. 172–177, 2004. DOI: https://doi.org/10.1115/1.1869509.
- G. S. Greco, A. Ianiro, and G. Gardone, “Time and phase average heat transfer in single and twin circular synthetic impingement air jets,” Int. J. Heat Mass Transf., vol. 73, pp. 776–788, 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.02.030.
- C. S. Greco, G. Paolillo, A. Ianiro, G. Cardone, and L. D. Luca, “Effect of the stroke length and nozzle to plate distance on synthetic jet impingement heat transfer,” Int. J. Heat Mass Transf., vol. 117, pp. 1019–1031, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.118.
- Y. H. Liu, S. Y. Tsai, and C. C. Wang, “Effect of driven frequency on flow and heat transfer of an impinging synthetic air jet,” App. Therm. Engg., vol. 75, pp. 289–297, 2015. DOI: https://doi.org/10.1016/j.applthermaleng.2014.09.086.
- M. Arik, R. Sharma, J. Lustbader, and X. He, “Steady and unsteady air impingement heat transfer for electronics cooling applications,” J. Heat Transf., vol. 135, pp. 09, 1110.
- M. Chaudhari, B. Puranik, and A. Agrawal, “Heat transfer characteristics of synthetic jet impingement cooling,” Int. J. Heat Mass Transf., vol. 53, pp. 1057–1069, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2009.11.005.
- M. Chaudhari, B. Puranik, and A. Agrawal, “Effect of orifice shape in synthetic jet based impingement cooling,” Exp. Therm. Fluid Sci., vol. 34, pp. 246–256, 2010. DOI: https://doi.org/10.1016/j.expthermflusci.2009.11.001.
- L. D. Mangate and M. B. Chaudhary, “Heat and acoustic study of impinging synthetic jet using diamond and oval shape orifice,” Int. J. Therm. Sci., vol. 89, pp. 100–109, 2015. DOI: https://doi.org/10.1016/j.ijthermalsci.2014.10.006.
- Y. H. Liu, T. H. Chang, and C. C. Wang, “Heat transfer enhancement of an impinging synthetic air jet using diffusion shaped orifice,” App. Therm. Engg., vol. 94, pp. 178–185, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2015.10.054.
- P. Gil, “Synthetic jet Reynolds number based on recation force measurement,” J. Fluids Struct., vol. 81, pp. 466–478, 2018. DOI: https://doi.org/10.1016/j.jfluidstructs.2018.05.011.
- P. Gil and J. Wilk, “Heat transfer coefficient during the impingement cooling with the use of syntheic jet,” Int. J. Therm. Sci., vol. 147, pp. 106132, 2020. DOI: https://doi.org/10.1016/j.ijthermalsci.2019.106132.
- J. Kordík, Z. Trávnícek, V. Timchenko, and N. A. Ismail, “The predominent effect of stroke length on velocity profiles at the exit of axisymmetric synthetic jet actuator,” Int. J. Heat Fluid Flow, vol. 66, pp. 197–208, 2017. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2017.06.004.
- M. Chiatto, A. Palumbo, and L. D. Luca, “Design approach to predict synthetic jet formation and resonance amplifications,” Exp. Therm. Fluid Sci., vol. 107, pp. 79–87, 2019. DOI: https://doi.org/10.1016/j.expthermflusci.2019.05.013.
- E. Fanning, T. Persoon, and D. B. Murray, “Heat transfer and flow characteristics of a pair of adjacent impinging synthetic jets,” Int. J. Heat Fluid Flow, vol. 54, pp. 153–166, 2015. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2015.05.005.
- M. Chaudhari, B. Puranik, and A. Agrawal, “Multiple orifice synthetic jet for improvement in impingement heat transfer,” Int. J. Heat Mass Transf., vol. 54, pp. 2056–2065, 2011. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.12.023.
- Z. B. Lou, X. Deng, Z. X. Xia, L. Wang, and W. J. Gong, “Flow field and heat transfer characteristics of impingement based on a vectoring dual synthetic jet actuator,” Int. J. Heat Mass Transf., vol. 102, pp. 18–25, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.06.003.
- L. D. Mangate and M. B. Chaudhari, “Experimental study on heat transfer characteristics of a heat sink with multiple orifice synthetic jet,” Int. J. Heat Mass Transf., vol. 103, pp. 1181–1190, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.08.058.
- L. Mangate, H. Yadav, A. Agrawal, and M. Chaudhari, “Experimental investigation on thermal and flow characteristics of synthetic jet with multiple orifice of different shapes,” Int. J. Therm. Sci., vol. 140, pp. 344–357, 2019. DOI: https://doi.org/10.1016/j.ijthermalsci.2019.02.036.
- D. Sykes and A. Carpenter, “Experimental investigation of multiple synthetic jets on heat transfer and pressure loss in minichannels,” Exp. Heat Transf., vol. 29, pp. 500–519, 2016. DOI: https://doi.org/10.1080/08916152.2015.1036179.
- X. M. Tan and Z. J. Zhang, “Flow and heat transfer characteristics under synthetic jets impingement driven by piezoelectric actuator,” Exp. Therm. Fluid Sci., vol. 48, pp. 134–146, 2013. DOI: https://doi.org/10.1016/j.expthermflusci.2013.02.016.
- G. S. Greco, A. Ianiro, T. Astarita, and G. Gardone, “On the near field of single and twin circular synthetic air jets,” Int. J. Heat Fluid Flow, vol. 44, pp. 41–52, 2013. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2013.03.018.
- M. Modak, K. Garg, S. Srinivasan, and S. K. Sahu, “Theoretical and experimental study on heat transfer characteristics of normally impinging two dimensional jets on a hot surface,” Int. J. Therm. Sci., vol. 112, pp. 174–187, 2017. DOI: https://doi.org/10.1016/j.ijthermalsci.2016.10.009.
- M. K. Agrawal and S. K. Sahu, “An experimental study on the rewetting of a hot vertical surface by circular water jet impingement,” Exp. Heat Transf., vol. 29, no. 2, pp. 151–172, 2015. DOI: https://doi.org/10.1080/08916152.2014.973973.
- R. Holman, Y. Utturkar, R. Mittal, B. L. Smith, and L. Cattafesta, “Formation criterion for synthetic jets,” Aiaa J., vol. 43, pp. 2110–2116, 2005. DOI: https://doi.org/10.2514/1.12033.
- H. Yadav, A. Joshi, M. Chaudhari, and A. Agrawal, “An experimental study of a multi-orifice synthetic jet with application to cooling of compact devices,” AIP Adv., vol. 9, pp. 125108–125111, 2019. DOI: https://doi.org/10.1063/1.5128776.
- M. Ikhlaq, Y. M. Al-Abdeli, and M. Khiadani, “Methodology for spatially resolved transient convection processes using infrared thermography,” Exp. Heat Transf., 2020. DOI: https://doi.org/10.1080/08916152.2020.1749189.
- S. C. Godi, S. Abraham, A. Pattamatta, and C. Balaji, “Evaluation of candidate strategies for the estimation of local heat transfer coefficient from wall jets,” Exp. Heat Transf., vol. 33, no. 1, pp. 40–63, 2020. DOI: https://doi.org/10.1080/08916152.2019.1570983.
- G. M. Carlomagno and G. Cardone, “Infrared thermography for convective heat transfer measurements,” Exp. Fluids, vol. 49, no. 6, pp.1187–1218, 2010. DOI: https://doi.org/10.1007/s00348-010-0912-2.
- Y. W. Lyu, J. Z. Jhang, C. Tang, and X. M. Tan, “Temperture-variation effect of piston-driven synthetic jet and its influence on defination of heat transfer coefficient,” Int. J. Heat Mass Transf., vol. 152, pp. 119347, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119347.
- R. Vinze, S. Chandel, M. D. Limaye, and S. V. Prabhu, “Influence of jet temperature and nozzle shape on the heat transfer distribution between a smooth plate and impinging air jets,” Int. J. Therm. Sci., vol. 99, pp. 136–151, 2016. DOI: https://doi.org/10.1016/j.ijthermalsci.2015.08.009.
- M. J. Rau and S. V. Garimella, “Local two-phase heat transfer from array of confined and submerged impinging jets,” Int. J. Heat Mass Transf., vol. 67, pp. 487–498, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.08.041.
- D. Lytle and W. B. Webb, “Air jet impingement heat transfer at low-nozzle plate spacings,” Int. J. Heat Mass Transf., vol. 37, pp. 1687–1697, 1994. DOI: https://doi.org/10.1016/0017-9310(94)90059-0.
- T. Astarita, G. Cardone, and G. M. Carlomagno, “Infrared thermography: an optical method in heat transfer and fluid flow visualization,” Optics Lasers Engg., vol. 44, pp. 261–281, 2006. DOI: https://doi.org/10.1016/j.optlaseng.2005.04.006.
- H. W. Coleman and W. G. Steele, Experimental and Uncertainty Analysis for Engineers. New York: Wiley, 1989.
- Measurement uncertainty, “The American soc of mech engg,” Paper no. PTC 19, 1985.
- M. Chaudhari, G. Verma, B. Puranik, and A. Agrawal, “Frequency response of a synthetic jet cavity,” Exp. Therm. Fluid Sci., vol. 33, pp. 439–448, 2009. DOI: https://doi.org/10.1016/j.expthermflusci.2008.10.008.
- L. Oren, E. Gutmark, S. Muragappan, and S. Khosla, “Flow characteristics of noncircular synthetic jets,” 47th AIAA Aero. Sci. Meet, Orlando, Florida, 2009, pp. 1309. doi:https://doi.org/https://doi.org/10.2514/6.2009-1309
- F. F. Grinstein and C. R. DeVore, “Dynamics of coherent structures and transition to turbulence in free square jets,” Phy. Fluids, vol. 8, pp. 1237–1251, 1996. DOI: https://doi.org/10.1063/1.868895.
- A. Kumar, A. K. Saha, and P. K. Panigrahi, “Time-frequency analysis of submerged synthetic jet,” Fluid Dyn. Res., vol. 49, pp. 065510, 2017. DOI: https://doi.org/10.1088/1873-7005/aa91d8.
- A. Kumar, A. K. Saha, P. K. Panigrahi, and A. Karn, “On the flow physics and vortex behaviour of rectangular orifice synthetic jets,” Exp. Therm. Fluid Sci., vol. 103, pp. 163–181, 2019. DOI: https://doi.org/10.1016/j.expthermflusci.2019.01.020.