References
- C. Y. Yang and R. L. Webb, “Condensation of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins,” Int. J. Heat Mass Trans., vol. 39, no. 4, pp.791–800, 1996. DOI: https://doi.org/10.1016/0017-9310(95)00150-6.
- R. L. Webb and C. Y. Yang, “A Comparison of R-12 and R-134a Condensation Inside Small Extruded Aluminum Plain and Microfin Tubes,” IMechE, vol. C4961053195, pp. 77–86, 1995.
- C. Y. Yang and R. L. Webb, “A predictive model for condensation in small hydraulic diameter tubes having axial microfins,” J. Heat Trans., vol. 119, no. 4, pp.776–782, 1997. DOI: https://doi.org/10.1115/1.2824182.
- M. Zhang and R. L. Webb, “Correlation of two-phase friction for refrigerants in small-diameter tubes,” Exp. Thermal Fluid. Sci., vol. 25, no. 3–4, pp.131–139, 2001. DOI: https://doi.org/10.1016/S0894-1777(01)00066-8.
- -W.-W.-W. Wang, T. D. Radcliff, and R. N. Christensen, “A condensation heat transfer correlation for millimeter-scale tubing with flow regime transition,” Exp. Thermal Fluid Sci., vol. 26, no. 5, pp.473–485, 2002. DOI: https://doi.org/10.1016/S0894-1777(02)00162-0.
- C. Y. Yang and R. L. Webb, “Frictional pressure drop of R-12 in small hydraulic diameter extruded aluminum tubes with and without microfins,” Int. J. Heat Mass Trans., vol. 39, no. 4, pp.801–809, 1996. DOI: https://doi.org/10.1016/0017-9310(95)00151-4.
- N. H. Kim, J. P. Cho, and B. Youn, “Condensation of R-22 and R-410A in flat aluminum extruded tubes,” Int. J. Refrig., vol. 26, pp. 830–839, 2003. DOI: https://doi.org/10.1016/S0140-7007(03)00049-5.
- R. L. Webb and K. Ermis, “Effect of hydraulic diameter on condensation of R-134A in flat, extruded aluminum tubes,” J. Enhanc. Heat Trans., vol. 8, no. 2, pp.77–90, 2001. DOI: https://doi.org/10.1615/JEnhHeatTransf.v8.i2.20.
- S. Koyama, K. Kuwahara, K. Nakashita, and K. Yamamoto, “An experimental study on condensation of refrigerant R134a in a multi-port extruded tube,” Int. J. Refrig., vol. 26, no. 4, pp.425–432, 2003. DOI: https://doi.org/10.1016/S0140-7007(02)00155-X.
- A. Cavallini, et al., “Condensation heat transfer and pressure gradient inside multiport minichannels,” Heat Transf. Eng., vol. 26, no. 3, pp.45–55, 2005. DOI: https://doi.org/10.1080/01457630590907194.
- T. M. Bandhauer, A. Agarwal, and S. Garimella, “Measurement and modeling of condensation heat transfer coefficients in circular microchannels,” J. Heat Trans., vol. 128, no. 10, pp.1050–1059, 2006. DOI: https://doi.org/10.1115/1.2345427.
- A. Agarwal, T. M. Bandhauer, and S. Garimella, “Measurement and modeling of condensation heat transfer in non-circular microchannels,” Int. J. Refrig., vol. 33, no. 6, pp.1169–1179, 2010. DOI: https://doi.org/10.1016/j.ijrefrig.2009.12.033.
- J. E. Park, F. Vakili-Farahani, L. Consilini, and J. R. Thome, “Experimental study on condensation heat transfer in vertical minichannels for new refrigerant R1234ze(E) versus R134a and R236fa,” Exp. Thermal. Fluid Sci., vol. 35, no. 3, pp.442–454, 2011. DOI: https://doi.org/10.1016/j.expthermflusci.2010.11.006.
- F. Illan-Gomez, A. Lopez-Belchi, J. R. Garcia-Cascales, and F. Vera-Garcia, “Experimental two-phase heat transfer coefficient and friction pressure drop inside minichannels during condensation with R1234yf and R134a,” Int. J. Refrig., vol. 51, pp. 12–23, 2015. DOI: https://doi.org/10.1016/j.ijrefrig.2014.11.014.
- A. Lopez-Belchi, F. Illan-Gomez, J. R. Garcia-Cascales, and F. Vera-Garcia, “Heat transfer coefficient during condensation inside a minichannel multiport tube with R32 and R410A as working fluids,” Sci. Tech. Built Env., vol. 21, pp. 535–544, 2015. DOI: https://doi.org/10.1080/23744731.2015.1040340.
- D. Jige, N. Inoue, and S. Koyama, “Condensation of refrigerants in a multiport tube with rectangular minichannels,” Int. J. Refrig., vol. 67, pp. 202–213, 2016. DOI: https://doi.org/10.1016/j.ijrefrig.2016.03.020.
- M. M. Rahman, H. Kariya, and A. Miyara, “An experimental study and development of new correlation for condensation heat transfer coefficient of refrigerant inside a multiport minichannel with and without fins,” Int.J. Heat Mass Trans., vol. 116, pp. 50–60, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.010.
- P. Knipper, D. Bertsche, R. Gneiting, and T. Wetzel, “Experimental investigation of heat transfer and pressure drop during condensation of R-134a in multiport flat tubes,” Int. J. Refrig., vol. 98, pp. 211–221, 2019. DOI: https://doi.org/10.1016/j.ijrefrig.2018.10.019.
- C. Y. Park and P. S. Hrnjak, “CO2 flow condensation heat transfer and pressure drop in multiport microchannels at low temperatures,” Int. J. Refrig., vol. 32, pp. 1129–1139, 2009. DOI: https://doi.org/10.1016/j.ijrefrig.2009.01.030.
- J. Heo, H. Park, and R. Yun, “Condensation heat transfer and pressure drop characteristics of CO2 in a microchannel,” Int. J. Refrig., vol. 36, pp. 1657–1668, 2013.
- P. Fernando, B. Palm, T. Ameel, P. Lundquist, and E. Granyd, “A minichannel aluminum tube heat exchanger - Part III: condenser performance with propane,” Int. J. Refrig., vol. 31, pp. 696–708, 2008. DOI: https://doi.org/10.1016/j.ijrefrig.2008.02.013.
- W. W. Akers, H. A. Deans, and O. K. Crosser, “Condensation heat transfer within horizontal tubes,” Chem. Eng. Progress Symp. Series, vol. 55, pp. 171–176, 1959.
- H. Haragucchi, S. Koyama, and T. Fujii, “Condensation of refrigerant HCFC22, HFC134a and HCFC123 in a horizontal smooth tube (2nd report, proposal of empirical expressions for the local heat transfer coefficient),” Trans. JSME (B), vol. 60, no. 574, pp. 245–252, 1994. (in Japanese).
- Y. P. Chang, R. Tsai, and J. W. Hwang, “Condensing heat transfer characteristics of aluminum flat tube,” Appl. Therm. Eng., vol. 17, no. 11, pp.1055–1065, 1997. DOI: https://doi.org/10.1016/S1359-4311(97)00011-2.
- S. M. Kim and I. Mudawar, “Flow condensation in parallel micro-channels - Part 2: heat transfer results and correlation technique,” Int. J. Heat Mass Trans., vol. 55, no. 4, pp.984–994, 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2011.10.012.
- Q. V. Pham, K.-I. Choi, J.-T. Oh, and H. Cho, “Flow condensation heat transfer of R410A, R22 and R32 inside a microfin tube,” Exp. Heat Transf., vol. 32, pp. 102–115, 2019. DOI: https://doi.org/10.1080/08916152.2018.1485783.
- A. K. Solanki and R. Kumar, “Condensation heat transfer and pressure drop characteristics of R-134a inside the flattened tubes at high mass flux and different saturation temperature,” Exp. Heat Transf., vol. 32, no. 1, pp.69–84, 2019. DOI: https://doi.org/10.1080/08916152.2018.1485781.
- E. E. Wilson, “A basis for rational design of heat transfer apparatus,” Trans. ASME, vol. 37, pp. 47–70, 1915.
- J. G. Collier and J. R. Thome, Convective Boiling and Condensation. 3rd. Oxford University Press, 1994.
- S. M. Zivi, “Estimation of steady-state steam void fraction by means of the principle of minimum entropy production,” J. Heat Transf., vol. 86, no. 2, pp.247–252, 1964. DOI: https://doi.org/10.1115/1.3687113.
- S. J. Kline and F. A. McClintock, “The description of uncertainties in single sample experiments,” Mech. Eng., vol. 75, pp. 3–9, 1953.
- V. Gnielinski, “On heat transfer in tubes,” Int. J. Heat Mass Trans., vol. 63, pp. 134–140, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.04.015.
- K. Sakamatapan, J. Kaew-On, A. S. Dalkilic, and S. Wongwises, “Condensation heat transfer characteristics of R-134a flowing inside the multiport minichannels,” Int. J. Heat Mass Trans., vol. 64, pp. 976–985, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.04.020.
- H. M. Soliman, “On the annular-to-wavy flow pattern transition during condensation inside horizontal tubes,” Canadian J. Chem. Eng., vol. 60, no. 4, pp.475–481, 1982. DOI: https://doi.org/10.1002/cjce.5450600405.
- A. Lopez-Belchi, F. Vera-Garcia, and J. R. Garcia-Cascales, “Non-uniform condensation of refrigerant R-134a in multi-channel multi-port tubes: two-phase pressure drop and heat transfer coefficient,” J. Enhanc. Heat Trans., vol. 22, no. 5, pp.391–416, 2015. DOI: https://doi.org/10.1615/JEnhHeatTransf.2016014248.
- M. M. Shah, “A correlation for heat transfer during condensation in mini/micro channels,” Int. J. Refrig., vol. 64, pp. 187–202, 2016. DOI: https://doi.org/10.1016/j.ijrefrig.2015.12.008.
- A. Cavallini, D. Del Col, M. Matkovic, and L. Rossetto, “Frictional pressure drop during vapor-liquid flow in minichannels: modeling and experimental evaluation,” Int. J. Heat Fluid Flow, vol. 30, no. 1, pp.131–191, 2009. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2008.09.003.
- L. Sun and K. Mishima, “Evaluation analysis of prediction methods for two-phase flow pressure drop in minichannels,” Int. J. Multiphase Flow, vol. 35, no. 1, pp.47–54, 2009. DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2008.08.003.
- K.-I. Choi, A. S. Pamitran, C.-Y. Oh, and J.-T. Oh, “Two-phase pressure drop of R-410A in horizontal smooth minichannels,” Int. J. Refrig., vol. 31, no. 1, pp.119–129, 2008. DOI: https://doi.org/10.1016/j.ijrefrig.2007.06.006.
- M. M. Shah, “A general correlation for heat transfer during film condensation inside pipes,” Int. J. Heat Mass Trans., vol. 22, no. 4, pp.547–556, 1979. DOI: https://doi.org/10.1016/0017-9310(79)90058-9.
- N.-H. Kim and R. L. Webb, “Analytic prediction of the friction and heat transfer for turbulent flow in axial internal fin tubes,” J. Heat Trans., vol. 115, no. 3, pp.553–559, 1993. DOI: https://doi.org/10.1115/1.2910723.
- A. Cavallini, D. Del Col, S. Mancin, and L. Lossetto, “Condensation of pure and near-azeotropic refrigerants in microfin tubes: a new computational procedure,” Int. J. Refrig., vol. 32, no. 1, pp.162–174, 2009. DOI: https://doi.org/10.1016/j.ijrefrig.2008.08.004.
- S. Mehendale, “Condensing heat transfer of pure refrigerants and refrigerant mixtures flowing within horizontal microfin tubes: a new model,” Int. J. Refrig., vol. 103, pp. 223–242, 2019. DOI: https://doi.org/10.1016/j.ijrefrig.2019.04.015.
- A. Cavallini, J. S. Brown, D. Del Col, and C. Zilio, “In-tube condensation performance of refrigerants considering penaization terms (exergy loss) for heat transfer and pressure drop,” Int. J. Heat Mass Trans., vol. 53, no. 13–14, pp.2885–2896, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.007.