References
- S. M. Saboya and F. E. M. Saboya, “Experiments on elliptic sections in one- and two-row arrangements of plate fin and tube heat exchangers,” Exp. Thermal Fluid Sci., vol. 24, no. 1–2, pp.65–75, 2001. DOI: https://doi.org/10.1016/S0894-1777(00)00059-5.
- J.-C. Min and R. L. Webb, “Numerical analyses of effects of tube shape on performance of a finned tube heat exchanger,” J. Enhanced Heat Trans., vol. 11, no. 1, pp.61–73, 2004. DOI: https://doi.org/10.1615/JEnhHeatTransf.v11.i1.50.
- J.-S. Leu, M.-S. Liu, J.-S. Liaw, and C. C. Wang, “A numerical investigation of louvered fin-and-tube heat exchangers having circular and oval tube configurations,” Int. J. Heat Mass Trans., vol. 44, no. 22, pp.4235–4243, 2001. DOI: https://doi.org/10.1016/S0017-9310(01)00081-3.
- H. Han, Y.-L. He, Y.-S. Li, Y. Wang, and M. Wu, “A numerical study on compact enhanced fin-and-tube heat exchangers with oval and circular tube configurations,” Int. J. Heat Mass Trans., vol. 65, pp. 686–695, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.06.049.
- Y.-B. Tao, Y.-L. He, Z.-G. Wu, and W.-Q. Tao, “Three-dimensional numerical study and field synergy principle analysis of wavy fin heat exchangers with elliptic tubes,” Int. J. Heat Fluid Flow, vol. 28, no. 6, pp.1531–1544, 2007. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2007.02.001.
- A. Gholami, M. A. Wahid, and H. A. Mohammed, “Thermal hydraulic performance of fin-and-oval tube compact heat exchangers with innovative design of corrugated fin patterns,” Int. J. Heat Mass Trans., vol. 106, pp. 573–592, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.028.
- A. Gholami, H. A. Mohammed, M. A. Wahid, and M. Khiadani, “Parametric design exploration of fin-and-oval tube compact heat exchangers performance with a new type of corrugated fin patterns,” Int. J. Thermal Sci., vol. 144, pp. 173–190, 2019. DOI: https://doi.org/10.1016/j.ijthermalsci.2019.05.022.
- C. K. Mangrukar, et al., “Thermal performance escalation of cross flow heat exchanger using in-line elliptical tubes,” Exp. Heat Transfer, vol. 33, no. 7, pp.587–612, 2020. DOI: https://doi.org/10.1080/08916152.2019.1704946.
- S. Singh, L. Pandey, H. Kharkwal, and H. Sah, “Augmentation of thermal performance of heat exchanger using elliptical and circular insert with vertical twisted tape,” Exp. Heat Transfer, vol. 33, no. 6, pp.510–525, 2020. DOI: https://doi.org/10.1080/08916152.2019.1662856.
- R. S. Matos, T. A. Laursen, J. V. C. Vargas, and A. Bejan, “Three-dimensional optimization of staggered finned circular and elliptic tubes in forced convection,” Int. J. Thermal Sci., vol. 43, no. 5, pp.477–487, 2004. DOI: https://doi.org/10.1016/j.ijthermalsci.2003.10.003.
- N.-H. Kim, K.-J. Lee, J.-C. Han, and B.-N. Choi, “Thermal performance of sine wave fin-and-oval tube heat exchangers,” Int. J. Air-Cond. Refrig., vol. 21, no. 1, pp.135008, 2013. DOI: https://doi.org/10.1142/S2010132513500089.
- N.-H. Kim, K.-J. Lee, and Y.-B. Jeong, “Airside performance of oval tube heat exchangers having sine wave fins under wet condition,” Appl. Therm. Eng., vol. 66, no. 1–2, pp.580–589, 2014. DOI: https://doi.org/10.1016/j.applthermaleng.2014.02.042.
- W.-X. Chu, W.-J. Sheu, -C.-C. Hsu, and -C.-C. Wang, “Airside performance of sinusoidal wavy fin-and-tube heat exchangers subject to large diameter tubes with round or oval configuration,” Appl. Therm. Eng., vol. 164, pp. 114469, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114469.
- D. R. Mirt and S. Ramadhyani, “Prediction of cooling-coil performance under condensing conditions,” Int. J. Heat Fluid Flow, vol. 14, no. 4, pp.391–400, 1993. DOI: https://doi.org/10.1016/0142-727X(93)90013-D.
- -C.-C. Wang, J.-S. Liaw, and B.-C. Yang, “Airside performance of herringbone wavy fin-and-tube heat exchangers – data with larger diameter tube,” Int. J. Heat Mass Trans., vol. 54, no. 5–6, pp.1024–1029, 2011. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.11.038.
- Y.-C. Liu, S. Wongwises, W.-J. Chang, and -C.-C. Wang, “Airside performance of fin-and-tube heat exchangers in dehumidifying conditions – data with larger diameter,” Int. J. Heat Mass Trans., vol. 53, no. 7–8, pp.1603–1608, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2009.12.015.
- ASHRAE Standard 41.1, “Standard method for temperature measurement,” ASHRAE, 1986.
- ASHRAE Standard 41.2, “Standard method for laboratory air-flow measurement,” ASHRAE, 1987.
- ASHRAE Standard 41.5, “Standard measurement guide, engineering analysis and experimental data,” 1975.
- ESDU 98005, “Design and Performance evaluation of heat exchangers: the effectiveness and NTU method,” Engineering and Sciences Data Unit 98005 with Amendment A, London ESDU International plc., pp. 122–129, 1998.
- A. F. Mills, Basic Heat and Mass Transfer, 3rd ed. Burr Ridge, IL: Irwin Pub., 1994.
- V. Gnielinski, “New equations for heat and mass transfer in turbulent pipe flows,” Int. Chem. Eng., vol. 16, pp. 359–368, 1976.
- J.-C. Min, T. Tao, and X.-F. Peng, “Efficiency of fins used in a finned oval tube heat exchanger,” J. Enhanced Heat Trans., vol. 10, no. 3, pp.323–334, 2003. DOI: https://doi.org/10.1615/JEnhHeatTransf.v10.i3.70.
- W. M. Kays and A. L. London, Compact Heat Exchangers, 3rd ed. Toledo, OH: Krieger Pub., 1998.
- -C.-C. Wang, R. L. Webb, and K.-Y. Chi, “Data reduction for airside performance of fin-and-tube heat exchangers,” Exp. Therm. Fluid Sci., vol. 21, no. 4, pp.218–226, 2000. DOI: https://doi.org/10.1016/S0894-1777(00)00005-4.
- D. L. Gray and R. L. Webb, “Heat transfer and friction correlations for plate fin-and-tube heat exchangers having plain fins,” Proc. 9th Int. Heat. Transfer. Conf., pp. 2745–2750, 1986.
- N.-H. Kim and R. L. Webb, “Air-side heat transfer and friction correlations for plain fin-and-tube heat exchangers with staggered tube arrangements,” J. Heat Transfer, vol. 121, pp. 662–667, 1999. DOI: https://doi.org/10.1115/1.2826030.
- -C.-C. Wang, K.-Y. Chi, and C.-J. Chang, “Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part II: correlation,” Int. J. Heat Mass Trans., vol. 43, no. 15, pp.2693–2700, 2000. DOI: https://doi.org/10.1016/S0017-9310(99)00333-6.
- K. Torikoshi, G.-N. Xi., Y. Nakazawa, and H. Asano, “Flow and heat transfer performance of a plate fin and tube heat exchanger (First report: effect of fin pitch),” Proc. 10th Int. Heat. Transfer. Conf., vol. 4, pp. 411–416, 1994.