Heat transfer enhancement and entropy generation analysis of a tube with perforated conical inserts

References

• S. Liu and M. Sakr, “A comprehensive review on passive heat transfer enhancements in pipe exchangers,” Renew. Sustain. Energy Rev., vol. 19, pp. 64–81, 2013. DOI: 10.1016/j.rser.2012.11.021.
   Web of Science ®Google Scholar
• B. Kumar, G. P. Srivastava, M. Kumar, and A. K. Patil, “A review of heat transfer and fluid flow mechanism in heat exchanger tube with inserts,” Chem. Eng. Process., vol. 123, pp. 126–137, 2018. DOI: 10.1016/j.cep.2017.11.007.
   Web of Science ®Google Scholar
• P. Promvonge, “Heat transfer behaviors in round tube with conical ring inserts,” Energy Convers. Manage., vol. 49, no. 1, pp.8–15, 2008. DOI: 10.1016/j.enconman.2007.06.009.
   Web of Science ®Google Scholar
• İ. Kurtbas, A. Durmus, H. Eren, and E. Turgut, “Effect of propeller type swirl generators on the entropy generation and efficiency of heat exchangers,” Int. J. Therm. Sci., vol. 46, no. 3, pp.300–307, 2007. DOI: 10.1016/j.ijthermalsci.2006.06.003.
   Web of Science ®Google Scholar
• I. Yaningsih, A. T. Wijayanta, T. Miyazaki, and S. Koyama, “V-cut twisted tape insert effect on heat transfer enhancement of single phase turbulent flow heat exchanger,” AIP Conf. Proc., vol. 1931, no. 030038, 2018.
   Google Scholar
• A. T. Wijayanta and M. Mirmanto Aziz, “Heat transfer augmentation of internal flow using twisted tape insert in turbulent flow,” Heat Transf. Eng., vol. 41, no. 14, pp.1288–1300, 2020. DOI: 10.1080/01457632.2019.1637149.
   Web of Science ®Google Scholar
• A. S. Patil, S. S. Kore, and N. K. Sane, “Thermal performance of tube exchanger enhanced with hexagonal ring turbulators,” Exp. Heat Transfer, vol. 33, no. 5, pp.455–470, 2020. DOI: 10.1080/08916152.2019.1656302.
   Web of Science ®Google Scholar
• D. Kumar, A. K. Patil, and M. Kumar, “Experimental investigation of heat transfer and fluid flow in a circular tube with lanced ring insert,” Exp. Heat Transfer, vol. 33, no. 6, pp.560–571, 2020. DOI: 10.1080/08916152.2019.1691086.
   Web of Science ®Google Scholar
• S. Bhattacharyya, A. I. Bashir, K. Dey, and R. Sarkar, “Effect of novel short-length wavy-tape turbulators on fluid flow and heat transfer: experimental study,” Exp. Heat Transfer, vol. 33, no. 4, pp.335–354, 2020. DOI: 10.1080/08916152.2019.1639847.
   Web of Science ®Google Scholar
• S. Bhattacharyya, H. R. B, and A. R. Paul, “The effect of circular hole spring tape on the turbulent heat transfer and entropy analysis in a heat exchanger tube: an experimental study,” Exp. Heat Transfer, pp. 1–20, 2020. DOI: 10.1080/08916152.2020.1787560.
   Web of Science ®Google Scholar
• S. Yadav and S. K. Sahu, “Effect of helical surface disc turbulator on thermal and friction characteristics of double pipe water to air heat exchanger,” Exp. Heat Transfer, vol. 34, no. 1, pp.51–67, 2021. DOI: 10.1080/08916152.2020.1714819.
   Web of Science ®Google Scholar
• S. K. Singh and J. Sarkar, “Experimental hydrothermal characteristics of concentric tube heat exchanger with V-cut twisted tape turbulator using PCM dispersed mono/hybrid nanofluids,” Exp. Heat Transfer, vol. 34, no. 5, pp.421–442, 2021. DOI: 10.1080/08916152.2020.1772412.
   Web of Science ®Google Scholar
• X. Peng, D. Wang, G. Wang, Y. Yang, and S. Xiang, “Investigation of heat transfer performance and flow characteristic in helically coiled-twisted flat tube,” Exp. Heat Transfer, vol. 33, no. 5, pp.419–439, 2020. DOI: 10.1080/08916152.2019.1656300.
   Web of Science ®Google Scholar
• M. M. Ibrahim, et al. “A computational study of heat transfer analysis for a circular tube with conical ring turbulators,” Int. J. Therm. Sci., vol. 137, pp. 138–160, 2019. DOI: 10.1016/j.ijthermalsci.2018.10.028.
   Web of Science ®Google Scholar
• V. Kongkaitpaiboon, K. Nanan, and S. Eiamsa-ard, “Experimental investigation of heat transfer and turbulent flow friction in a tube fitted with perforated conical-rings,” Int. Commun. Heat Mass Transf., vol. 37, no. 5, pp.560–567, 2010. DOI: 10.1016/j.icheatmasstransfer.2009.12.015.
   Web of Science ®Google Scholar
• M. E. Nakhchi and J. A. Esfahani, “Numerical investigation of different geometrical parameters of perforated conical rings on flow structure and heat transfer in heat exchangers,” Appl. Therm. Eng., vol. 156, pp. 494–505, 2019. DOI: 10.1016/j.applthermaleng.2019.04.067.
   Web of Science ®Google Scholar
• P. Promvonge and S. Eiamsa-ard, “Heat transfer enhancement in a tube with combined conical-nozzle inserts and swirl generator,” Energy Convers. Manage., vol. 47, no. 18–19, pp.2867–2882, 2006. DOI: 10.1016/j.enconman.2006.03.034.
   Web of Science ®Google Scholar
• P. Promvonge and S. Eiamsa-ard, “Heat transfer in a circular tube fitted with free-spacing snail entry and conical-nozzle turbulators,” Int. Commun. Heat Mass Transf., vol. 34, no. 7, pp.838–848, 2007. DOI: 10.1016/j.icheatmasstransfer.2007.03.020.
   Web of Science ®Google Scholar
• S. Eiamsa-ard and P. Promvonge, “Experimental investigation of heat transfer and friction characteristics in a circular tube fitted with V-nozzle turbulators,” Int. Commun. Heat Mass Transf., vol. 33, no. 5, pp.591–600, 2006. DOI: 10.1016/j.icheatmasstransfer.2006.02.022.
   Web of Science ®Google Scholar
• A. R. Anvari, et al. “Experimental research on heat transfer of water in tubes with conical ring inserts in transient regime,” Int. Commun. Heat Mass Transf., vol. 38, no. 5, pp. 668–671, 2011. DOI: 10.1016/j.icheatmasstransfer.2011.03.016.
   Web of Science ®Google Scholar
• G. Yakar, “Experimental analysis of conical baffles with rifts on heat transfer and pressure drop,” Exp. Heat Transfer, vol. 32, no. 1, pp. 25–35, 2019. DOI: 10.1080/08916152.2018.1473527.
   Web of Science ®Google Scholar
• I. Yaningsiha, A. T. Wijayantaa, T. Miyazakic, and S. Koyamac, “Thermal hydraulic characteristics of turbulent single-phase flow in an enhanced tube using louvered strip insert with various slant angles,” Int. J. Therm. Sci., vol. 134, pp. 355–362, 2018. DOI: 10.1016/j.ijthermalsci.2018.08.025.
   Web of Science ®Google Scholar
• H. Shokouhmand and M. R. Salimpour, “Entropy generation analysis of fully developed laminar forced convection in a helical tube with uniform wall temperature,” Heat Mass Transf., vol. 44, no. 2, pp.213–220, 2007. DOI: 10.1007/s00231-007-0235-x.
   Web of Science ®Google Scholar
• O. Keklikcioglu and V. Ozceyhan, “Entropy generation analysis for a circular tube with equilateral triangle cross sectioned coiled-wire inserts,” Energy, vol. 139, pp. 65–75, 2017. DOI: 10.1016/j.energy.2017.07.145.
   Web of Science ®Google Scholar
• X. Zhu, L. Zhu, and J. Zhao, “Wavy-tape insert designed for managing highly concentrated solar energy on absorber tube of parabolic trough receiver,” Energy, vol. 141, pp. 1146–1155, 2017. DOI: 10.1016/j.energy.2017.10.010.
   Web of Science ®Google Scholar
• M. Sheikholeslami, M. Jafaryar, A. Shafee, Z. Li, and R. Haq, “Heat transfer of nanoparticles employing innovative turbulator considering entropy generation,” Int. J. Heat Mass Transf., vol. 136, pp. 1233–1240, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.03.091.
   Web of Science ®Google Scholar
• M. Sheikholeslami, et al., “Heat transfer and turbulent simulation of nanomaterial due to compound turbulator including irreversibility analysis,” Int. J. Heat Mass Transf., vol. 137, pp. 1290–1300, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.04.030.
   Web of Science ®Google Scholar
• ASME standard, Measurement of Fluid Flow in Pipes Using Orifice, Nozzle and Venture. New York: ASME MFC- 3M- 1984. United engineering center 345east 47th street, 1984, pp. 1–56.
   Google Scholar
• J. P. Meyer, M. Everts, N. Coetzee, K. Grote, and M. Steyn, “Heat transfer coefficients of laminar, transitional, quasi-turbulent and turbulent flow in circular tubes,” Int. Commun. Heat Mass Transf., vol. 105, pp. 84–106, 2019. DOI: 10.1016/j.icheatmasstransfer.2019.03.016.
   Web of Science ®Google Scholar
• S. Kimura and A. Bejan, “The “heatline” visualization of convective heat transfer,” J. Heat Mass Transf., vol. 105, no. 4, pp.916–919, 1983. DOI: 10.1115/1.3245684.
   Google Scholar
• A. Bejan and J. Kestin, “Entropy generation through heat and fluid flow,” J. Appl. Mech., vol. 50, no. 2, pp.475, 1983. DOI: 10.1115/1.3167072.
   Web of Science ®Google Scholar