Heat transfer in a trailing cooling channel using ejection slot with different chordwise length ratio of impingement cavity

References

• S. W. Moon and S. C. Lau, “Heat transfer between blockages with holes in a rectangular channel,” J Heat Transfer, vol. 125, no. 4, pp.587–594, 2003. DOI: 10.1115/1.1576812.
   Web of Science ®Google Scholar
• R. Kan, J. Ren, and H. Jiang, Combined effects of perforated blockages and pin fins in a trailing edge internal cooling duct. ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Düsseldorf, Germany, 2014, V05AT12A020.
   Google Scholar
• H. Chung, J. S. Park, H. S. Sohn, D. H. Rhee, and H. H. Cho, “Trailing edge cooling of a gas turbine blade with perforated blockages with inclined holes,” Int J Heat Mass Transf, vol. 73, no. jun, pp.9–20, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.01.062.
   Google Scholar
• -J.-J. Hwang, D.-Y. Lai, and Y.-P. Tsia, “Heat transfer and pressure drop in pin-fin trapezoidal ducts,” Journal of Turbomachinery, vol. 121, no. 2, pp.264–271, 1999. DOI: 10.1115/1.2841310.
   Web of Science ®Google Scholar
• -J.-J. Hwang and -C.-C. Lu, Lateral-flow effect on endwall heat transfer and pressure drop in a pin-fin trapezoidal duct of various pin shapes, ASME Turbo Expo 2000: Power for Land, Sea, and Air, Munich, Germany, 2000, V003T01A040.
   Google Scholar
• Z. Shen, Y. Xie, and D. Zhang, “Experimental and numerical study on heat transfer in trailing edge cooling passages with dimples/protrusions under the effect of side wall slot ejection,” Int J Heat Mass Transf, vol. 92, pp. 1218–1235, 2016. DOI: 10.1016/j.ijheatmasstransfer.2015.09.042.
   Web of Science ®Google Scholar
• T. K. Kumaran, J. C. Han, and S. C. Lau, “Augmented heat transfer in a pin fin channel with short or long ejection holes,” Int J Heat Mass Transf, vol. 34, no. 10, pp.2617–2628, 1991. DOI: 10.1016/0017-9310(91)90101-J.
   Web of Science ®Google Scholar
• S. C. Lau, J. C. Han, and Y. S. Kim, “Turbulent heat transfer and friction in pin fin channels with lateral flow ejection,” J Heat Transfer, vol. 111, no. 1, pp.51–58, 1989. DOI: 10.1115/1.3250657.
   Web of Science ®Google Scholar
• S. C. Lau, J. C. Han, and T. Batten, “Heat transfer, pressure drop, and mass flow rate in pin fin channels with long and short trailing edge ejection holes,” Journal of Turbomachinery, vol. 111, no. 2, pp.116–123, 1989. DOI: 10.1115/1.3262245.
   Google Scholar
• L. M. Wright and A. S. Gohardani, “Effect of coolant ejection in rectangular and trapezoidal trailing-edge cooling passages,” Journal of Thermophysics and Heat Transfer, vol. 23, no. 2, pp.316–326, 2009. DOI: 10.2514/1.38426.
   Web of Science ®Google Scholar
• R. Kan, L. Yang, J. Ren, and H. Jiang, Effect of rib configuration and lateral ejection on a high aspect ratio trailing edge channel, Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, San Antonio, Texas, USA, 2013, V03AT12A018.
   Google Scholar
• M. E. Taslim and X. Huang, “Experimental/numerical investigation on the effects of trailing-edge cooling hole blockage on heat transfer in a trailing-edge cooling channel,” Journal of Engineering for Gas Turbines and Power, vol. 136, no. 8, pp.082603, 2014. DOI: 10.1115/1.4026845.
   Web of Science ®Google Scholar
• M. E. Taslim and A. Nongsaeng, “Experimental and numerical cross-over jet impingement in an airfoil trailing-edge cooling channel,” Journal of Turbomachinery, vol. 133, no. 4, pp.1–10, 2011. DOI: 10.1115/1.4002984.
   Web of Science ®Google Scholar
• A. Armellini, F. Coletti, T. Arts, and C. Scholtes, “Aerothermal investigation of a rib-roughened trailing edge channel with crossing-jets—part I: flow field analysis,” Journal of Turbomachinery, vol. 132, no. 1, pp.011009, 2009. DOI: 10.1115/1.3103929.
   Web of Science ®Google Scholar
• F. Coletti, A. Armellini, T. Arts, and C. Scholtes, “Aerothermal investigation of a rib-roughened trailing edge channel with crossing jets—part II: heat transfer analysis,” Journal of Turbomachinery, vol. 133, pp. 663–673, 2010.
   Web of Science ®Google Scholar
• D. H. Rhee, D. H. Lee, H. H. Cho, and H. K. Moon, Effects of duct aspect ratios on heat/mass transfer with discrete V-shaped ribs, ASME turbo expo 2003, collocated with the 2003 International Joint Power Generation Conference, Atlanta, Georgia, USA, 2003, 509–516.
   Google Scholar
• M. E. Taslim, T. Li, and S. D. Spring, “Experimental study of the effects of bleed holes on heat transfer and pressure drop in trapezoidal passages with tapered turbulators,” Journal of Turbomachinery, vol. 117, no. 2, pp.281–289, 1995. DOI: 10.1115/1.2835657.
   Web of Science ®Google Scholar
• S. Bu, C. Shi, L. Zhang, W. Xu, and L. Liu, “The influence of lateral ejection on the thermal performance of matrix cooling channel,” Appl. Therm. Eng., vol. 157, pp. 113506, 2019. DOI: 10.1016/j.applthermaleng.2019.03.077.
   Web of Science ®Google Scholar
• M. Effendy, Y. F. Yao, J. Yao, and D. R. Marchant, “Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles,” International Journal of Heat and Fluid Flow, vol. 80, pp. 108487, 2019. DOI: 10.1016/j.ijheatfluidflow.2019.108487.
   Web of Science ®Google Scholar
• F. M. S. Kline, “Describing uncertainties in single-sample experiments,” Mechanical Engineering, vol. 75, pp. 3–8, 1953.
   Google Scholar