References
- Pellicer E, Varea A, Pané S, et al. A comparison between fine-grained and nanocrystalline electrodeposited Cu–Ni films. Insights on mechanical and corrosion performance. Surf Coat Technol. 2011;205:5285–5293.
- Rajasekaran N, Mohan S. Structure, microstructure and corrosion properties of brush-plated Cu–Ni alloy. J Appl Electrochem. 2009;39:1911–1916.
- Yu LP, Jiang Y, He YH, et al. The corrosion behavior of sintering micro-porous Ni–Cu alloy in hydrofluoric acid solution. J Alloy Comp. 2015;638:7–13.
- Rao S, Zou X, Wang S, et al. Electrodeposition of Ni–Cu alloy films from nickel matte in deep eutectic solvent. Mater Chem Phys. 2019;232:6–15.
- Sarac U, Baykul MC. Morphological and microstructural properties of two-phase Ni–Cu films electrodeposited at different electrolyte temperatures. J Alloys Comp. 2013;552:195–201.
- Wang C, Bhuiyan MEH, Moreno S, et al. Direct-write printing copper−nickel (Cu/Ni) alloy with controlled composition from a single electrolyte using co-electrodeposition. ACS Appl Mater Intefaces. 2020;12:18683–18691.
- Jena PK, Brocchi EA, Motta MS. Preparation of Cu–Ni alloys through a new chemical route. Metall MaterTrans B. 2004;35B:1107–1112.
- Straumal BB, Protasova SG, Mazilkin AA, et al. Deformation-driven formation of equilibrium phases in the Cu–Ni alloys. J Mater Sci. 2012;47:360–367.
- Shen TD, Koch CC, Tsui TY, et al. On the elastic moduli of nanocrystalline Fe, Cu, Ni, and Cu–Ni alloys prepared by mechanical milling/alloying. J Mater Res. 1995;10:2892–2896.
- Wang ZY, Han D, Li XW. Competitive effect of stacking fault energy and short-range clustering on the plastic deformation behavior of Cu–Ni alloys. Mater Sci Eng. A. 2017;679:484–492.
- Naik SN, Walley SM. The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals. J Mater Sci. 2020;55:2661–2681.
- Eder SJ, Ripoll MR, Cihak-Bayr U, et al. Unraveling and mapping the mechanisms for near-surface microstructure evolution in CuNi alloys under sliding. ACS Appl Mater Interfaces. 2020;12:32197–32208.
- Rahman MM, Islam MS, Anjum N. Investigation on mechanical behaviors of Cu–Ni binary alloy nanopillars: a molecular dynamics study. J Mol Model. 2020;26:214.
- Wang Y, Zuo J, Jiang N, et al. Uniaxial tension deformation study of copper/nickel laminated composites: effects of lamella number and interlamellar spacing. Comp Mater Sci. 2020;171:109272.
- Weng S, Ning H, Hu N, et al. Strengthening effects of twin interface in Cu/Ni multilayer thin films – a molecular dynamics study. Mater Des. 2016;111:1–8.
- Wu CD, Huang BX, Li HX. Effects of interfacial defect on deformation and mechanical properties of Cu/Ni bilayer—a molecular dynamics study. Thin Solid Films. 2020;707:138050.
- Qi Y, Cagin T, Kimura Y, et al. Molecular-dynamics simulations of glass formation and crystallization in binary liquid metals: Cu–Ag and Cu–Ni. Phys Rev B. 1999;59:3527–3533.
- Celik FA. Cooling rate dependence of the icosahedral order of amorphous CuNi alloy: a molecular dynamics simulation. Vacuum. 2013;97:30–35.
- Zhou LL, Yang RY, Tian ZA, et al. Molecular dynamics simulation on structural evolution during crystallization of rapidly super-cooled Cu50Ni50 alloy. J Alloy Com. 2017;690:633–639.
- Sutton AP, Chen J. Long-range Finnis–Sinclair potentials. Philos Mag Lett. 1990;61:139–146.
- Raffi-Tabar H, Sutton AP. Long-range Finnis–Sinclair potentials for FCC metallic alloys. Philos Mag Lett. 1991;63:217–224.
- Faken D, Jonsson H. Systematic analysis of local atomic structure combined with 3D computer graphics. Comput Mater Sci. 1994;2:279–286.
- Schiotz J, Vegge T, Di Tolla FD, et al. Atomic-scale simulations of the mechanical deformation of nanocrystalline metals. Phys Rev B. 1999;60:11971–11983.
- Le VV, Lien LTH. Structural and mechanical properties of densified (Li2O)0.2(SiO2)0.8 glasses: a molecular dynamics simulations study. J Non-Cryst Solids. 2021;564:120840.
- Shimizu F, Ogata S, Li J. Theory of shear banding in metallic glasses and molecular dynamics calculations. Mater Trans. 2007;48:2923–2292.
- Metals handbook: properties and selection-nonferrous alloys and special-purpose materials. Materials Park (OH): ASM International; 1990; 2: 265, 338, 437..
- Zhao Y, Peng X, Fu T, et al. Investigation of mechanical behaviour of amorphous aluminium nitride. Materialia. 2018;2:148.
- Wang J, Zhang P, Duan Q, et al. Tensile deformation behaviors of Cu_Ni alloy processed by equal channel angular pressing. Adv Eng Mater. 2010;12:304–311.