A novel split-belt apparatus: the stress distribution and performance of its tangent split die

References

• Bridgman PW. Explorations toward the limit of utilizable pressures. J Appl Phys. 1941;12:461–469. doi: 10.1063/1.1712926
   Google Scholar
• Hall HT. A new method of mounting diamonds. Rev Sci Instrum. 1954;25:1035–1036. doi: 10.1063/1.1770919
   Web of Science ®Google Scholar
• Hall HT. Some high-pressure, high-temperature apparatus design considerations: equipment for use at 100 000 atmospheres and 3000°C. Rev Sci Instrum. 1958;29:267–275. doi: 10.1063/1.1716172
   Web of Science ®Google Scholar
• Ekimov EA, Gavriliuk AG, Palosz B, et al. High-pressure, high-temperature synthesis of SiC–diamond nanocrystalline ceramics. Appl Phys Lett. 2000;77:954–956. doi: 10.1063/1.1288602
   Web of Science ®Google Scholar
• Gotou H, Yagi T, Okada T, et al. A simple opposed-anvil apparatus for high pressure and temperature experiments above 10 GPa. High Press Res. 2011;31:592–602. doi: 10.1080/08957959.2011.618130
   Web of Science ®Google Scholar
• Bundy FP, Hall, HT, Strong HM, et al. Man-made diamonds. Nature. 1955;176:51–55. doi: 10.1038/176051a0
   Web of Science ®Google Scholar
• Akaishi M, Kanda H, Yamaoka S. High pressure synthesis of diamond in the systems of grahpite-sulfate and graphite-hydroxide. Jpn J Appl Phys. 1990;29:L1172–L1174. doi: 10.1143/JJAP.29.L1172
   Web of Science ®Google Scholar
• Venkateswaran C, Anbukumaran K, Victor Jaya N, et al. Design and performance of a belt-type high pressure, high temperature apparatus. Rev Sci Instrum. 1997;68:189–192. doi: 10.1063/1.1147807
   Web of Science ®Google Scholar
• Fukunaga O, Ko YS, Konoue M, et al. Pressure and temperature control in flat-belt type high pressure apparatus for reproducible diamond synthesis. Diam Relat Mater. 1999;8:2036–2042. doi: 10.1016/S0925-9635(99)00171-5
   Web of Science ®Google Scholar
• Bocquillon G, Leger JM, Bogicevic C. Optimization of stress in the anvils of an opposed-movement multianvil device. Meas Sci Technol. 2002;13:885–894. doi: 10.1088/0957-0233/13/6/309
   Web of Science ®Google Scholar
• Taniguchi T, Akaishi M, Kanke Y, et al. TiC–diamond composite disk-heater cell assembly to generate temperature of 2000 °C in a large-volume belt-type high-pressure apparatus at 10 GPa. Rev Sci Instrum. 2004;75:1959–1962. doi: 10.1063/1.1753092
   Web of Science ®Google Scholar
• Lee HC, Gurland J. Hardness and deformation of cemented tungsten carbide. Mat Sci Eng. 1978;33:125–133. doi: 10.1016/0025-5416(78)90163-5
   Web of Science ®Google Scholar
• Rowcliffe DJ, Jayaram V, Hibbs MK, et al. Compressive deformation and fracture in WC materials. Mat Sci Eng. 1988;105–106:299–303. doi: 10.1016/0025-5416(88)90710-0
   Web of Science ®Google Scholar
• Chen W, Ravichandran G. Failure mode transition in ceramics under dynamic multiaxial compression. Int J Fract. 2000;101:141–159. doi: 10.1023/A:1007672422700
   Web of Science ®Google Scholar
• Levitas VI, Zarechnyy OM. Numerical study of stress and plastic strain evolution under compression and shear of a sample in a rotational anvil cell. High Press Res. 2010;30:653–669. doi: 10.1080/08957959.2010.534990
   Web of Science ®Google Scholar
• Vrbka J, Knésl Z, Lakomý M. Optimal design and lifetime calculation of the belt chamber by finite element method. High Press Res. 1990;5:891–893. doi: 10.1080/08957959008246290
   Google Scholar
• Klünsner T, Wurster S, Supancic P, et al. Effect of specimen size on the tensile strength of WC–Co hard metal. Acta Mater. 2011;59:4244–4252. doi: 10.1016/j.actamat.2011.03.049
   Web of Science ®Google Scholar
• Liu Z, Li M, Han Q, et al. Numerical simulation and experiment on multilayer stagger-split die. Rev Sci Instrum. 2013;84:053903-1–053903-6.
   Web of Science ®Google Scholar
• Getting IC, Chen GL, Brown JA. The strength and rheology of commercial tungsten carbide cermets used in high-pressure apparatus. Pure Appl Geophys. 1993;141:545–577. doi: 10.1007/BF00998345
   Web of Science ®Google Scholar
• Deutschman AD, Michels WA, Wilson CE. Machine design theory and practice. New York: Macmillan; 1975.
   Google Scholar
• Pugh HLID, Crossland B. High pressure engineering. London: Mechanical Engineering Publications Limited for the Institution of Mechanical Engineers; 1977.
   Google Scholar
• Yao YC. Synthetic diamond and ultra-high pressure high temperature technology. Beijing: Chemical; 1996.
   Google Scholar
• Vrbka J, Knesl Z. Proceedings of high pressure geoscience and material synthesis. Berlin: Akademie-Verlag; 1988.
   Google Scholar