Publication Cover
Inhalation Toxicology
International Forum for Respiratory Research
Volume 31, 2019 - Issue 3
157
Views
5
CrossRef citations to date
0
Altmetric
Research Article

Evaluation of the amount of nanoparticles emitted in LASER additive manufacture/welding

ORCID Icon, ORCID Icon, ORCID Icon, ORCID Icon & ORCID Icon
Pages 125-130 | Received 23 Nov 2018, Accepted 13 May 2019, Published online: 10 Jun 2019

References

  • Anand S, Mayya Y, Yu M, Seipenbusch M, Kasper G. (2012). A numerical study of coagulation of nanoparticle aerosols injected continuously into a large, well stirred chamber. J Aerosol Sci. 52:18–32.
  • Antonini J, Clarke R, Krishna-Murthy G, Sreekanthan P, Jenkis N, Eager T, Brain J. (1998). Freshly generated stainless steel welding fume induces greater lung inflammation in rats as compared to aged fume. Tox Lett. 98:77–86.
  • Antonini J, Taylor M, Zimmer A, Roberts J. (2004). Pulmonary responses to welding fumes: role of metal constituents. J Toxicol Environ Health Part A. 67:233–249.
  • Becker N. (1999). Cancer mortality among arc welders exposed to fume containing chromium and nickel. J Occ Env Med. 41:294–303.
  • Faludi J, Baumers M, Maskery I, Hague R. (2017). Environmental impacts of selective laser melting: do printer, powder, or power dominate? J Ind Ecol. 21:S144–S156.
  • Ford S, Despeisse M. (2016). Additive manufacturing and sustainability: an exploratory study of the advantages and challenges. J Clean Prod. 137:1573–1587.
  • Friedlander S. (1977). Smoke, dust and haze: fundamentals of aerosol behavior. New York: Wiley-Interscience;333. p. 1.
  • Gomes J, Albuquerque P, Miranda R, Vieira M. (2012). Determination of airborne nanoparticles from welding operations. J Toxicol Environ Health A. 75:13–15.
  • Gomes J, Guerreiro C, Lavrador D, et al. (2013). TEM analysis as a tool for toxicological assessment of occupational exposure to airborne nanoparticles from welding. Microsc Microanal. 19:153–154.
  • Hinds W. (1982). Aerosol technology: properties, behavior, and measurement of airborne particles. New York: Wiley-Interscience;42 p. 1.
  • Hoet P, Hohlfeld I, Salata O. (2004). Nanoparticles – known and unknown health risks. J Nanobiotechnology. 2:12.
  • ICRP. (1994). Human respiratory tract model for radiological protection. Ann ICRP. 24:1–3.
  • Keenan C, Goth-Goldstein R, Lucas D, Sedlak D. (2009). Oxidative stress induced by zero-valent iron nanoparticles and Fe(II) in human bronchial epithelial cells. Environ Sci Tech. 43:4555–4560.
  • Lanone S, Rogerieux F, Geys J, et al. (2009). Comparative toxicity of 24 manufactured nanoparticles in human alveolar epithelial and macrophage cell lines. Part Fibre Tox. 6:14.
  • Limbach L, Wick P, Manser P, et al. (2007). Exposure of engineered nanoparticles to human lung epithelial cells: influence of chemical composition and catalytic activity on oxidative stress. Environ Sci Tech. 41:4158–4163.
  • Maynard A, Kuempel E. (2005). Airborne nanostructured particles and occupational health. J Nanoparticle Res. 7:587–614.
  • Moroni B, Viti C. (2009). Grain size, chemistry, and structure of fine and ultrafine particles in stainless steel welding fumes. Aer Sci. 40:938–949.
  • Mukherjee T, Zuback J, Zhang W, DebRoy T. (2018). Residual stresses and distortion in additively manufactured compositionally graded and dissimilar joints. Comp Mats Sci. 143:325–337.
  • Murr L, Gaytan S, Ramirez D, et al. (2012). Metal fabrication by additive manufacturing using laser and electron beam melting technologies. J Mats Sci Tech. 28:1–14.
  • Oberdörster G, Oberdörster E, Oberdörster J. (2005). Nanotoxicology: an emerging discipline evolving from studies of ultrafine particles. Environ Health Perspect. 113:823–839.
  • Palanivel S, Nelaturu P, Glass B, Mishra R. (2015). Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy. Mats Des. 65:934–952.
  • Piotrowska G, Golimowski J, Urban P. (2009). Nanoparticles: their potential toxicity, waste and environmental management. Waste Manag. 29:2587–2595.
  • Schneider T, Brouwer D, Koponen I, et al. (2011). Conceptual model for assessment of inhalation exposure to manufactured nanoparticles. J Exp Sci Env Epidem. 21:450–463.
  • Seipenbusch M, Yu M, Asbach C, et al. (2014). Chapter 4-from source to dose: emission, transport, aerosol dynamics and dose assessment for workplace aerosol exposure. In: Savolainen, K., Wu, Q., Tongeren, M. V., Brouwer, D. & Berges, M. (eds.) Handbook of nanosafety. San Diego: Academic Press.
  • Seaton A, Tran L, Aitken R. Donaldson K. (2010). Nanoparticles, human health hazard and regulation. J R Soc Interface. 7(1):S119–S129.
  • Sharma A, Vijendra B, Ito K, et al. (2017). A new process for design and manufacture of tailor-made functionally graded composites through friction stir additive manufacturing. J Manuf Proc. 26:122–130.
  • Sjögren B, Hansen KS, Kjuus H, Persson PG. (1994). Exposure to stainless steel welding fumes and lung cancer: a meta-analysis. Occup Environ Med. 51:335–336.
  • Tang Y, Mak K, Zhao Y. (2016). A framework to reduce product environmental impact through design optimization for additive manufacturing. J Clean Prod. 137:1560–1572.
  • Yampolskiy M, Schutzle L, Vaidya U, Yasinsac A. (2015). Security challenges of additive manufacturing with metals and alloys Proceedings from the International Conference on Critical Infrastructure Protection; Mar 16; Arlington, VA, USA. p. 169–83.
  • Zhao C, Fezzaa K, Cunningham R, et al. (2017). Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction. Sci Rep. 7:3602.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.