References
- Hunter , W. G. and Kartha , C. P. , Determining the Most Profitable Target Value for a Production Process , J. Qual. Technol. , 9 , 176 – 181 ( 1977 ).
- Bisgaard , S. , Hunter , W. G. , and Pallesen , L. , Economic Selection of Quality of Manufactured Product , Technometries 26 , 9 – 18 ( 1984 ).
- Golhar , D. Y. , Determination of Best Mean Contents for a Canning Problem , J. Quat. Technol. , 19 , 82 – 84 ( 1987 ).
- Golhar , D. Y. and Pollock , S. M. , Determination of the Optimal Process Mean and the Upper Limit for a Canning Problem , J. Qual. Technol. , 20 , 188 – 192 ( 1988 ).
- Dodson , B. L. , Determining the Optimal Target Value for a Process with Upper and Lower Specifications , Qual. Eng. , 5 , 393 – 402 ( 1993 ).
- Schmidt , R. L. and Pfeifer , P. E. , Economic Selection of the Mean and Upper Limit for a Canning Problem with Limited Capacity, J. Qual. Technol. , 23, 312–317 (1991).
- Pollock , S. M. and Golhar , D. Y. , The Canning Problem Revisited The Case of Capacitated Production and Fixed Demand , Eur. J. Open Res. , 105 , 475 – 482 ( 1998 ).
- Usher , J. S. , Alexander , S. M. , and Duggins , D. C. , III , The Filling Problem Revisited , Qual. Eng. , 9 , 35 – 44 ( 1996 ).
- Boucher , T. O. and Jafari , M. A. , The Optimum Target Value for Single Filling Operations with Quality Sampling Plan , J. Qual. Technol. , 23 , 44 – 47 ( 1991 ).
- Al-Sultan , K. S. , An Algorithm for the Determination of the Optimal Target Value for Two Machines in Series with Quality Sampling Plan , Int. J. Product. Res. , 12 , 37 – 45 ( 1994 ).
- Tang , K. and Lo , J. , Determination of the Process Mean When Inspection Is Based on a Correlated Variable , IIE Trans. , 25 , 66 – 72 ( 1993 ).
- Lee , M. K. and Kim , G. S. , Determination of the Optimal Target Values for a Filling Process When Inspection Is Based on a Correlated Variable , Int. J. Product. Econ. , 37 , 205 – 213 ( 1994 ).
- Lee , M. K. and Jang , J. S. , The Optimum Target Values for a Production Process with Three-Class Screening , Int. J. Product. Econ. , 49 , 91 – 99 ( 1997 ).
- Hong , S. H. , Elsayed , E. A. , and Lee , M. K. , Optimum Mean Value and Screening Limits for Production Processes with Multi-Class Screening , Int. J. Product. Res. , 37 , 155 – 163 ( 1999 ).
- Montgomery , D. C. , Introduction to Statistical Quality Control , John Wiley & Sons , New York , 1997 .
- Quensenberry , C. P. , SPC Methods for Quality Improvement , John Wiley & Sons , New York , 1997 .
- Modi , A. , Six-Sigma Process Quality , Qual. Forum , 18 , 145 – 149 ( 1992 ).
- Kapur , K. , and Cho , B. R. , Economic Design of Specifications , Qual. Eng. , 6 , 410 – 417 ( 1994 ).
- Kapur , K. , and Cho , B. R. , Economic Design of the Specification Region for Multiple Quality Characteristics , IIE Trans. , 28 , 237 – 248 ( 1996 ).
- Cho , B. R. and Phillips , M. D. , Design of the Optimum Product Specifications for S-type Quality Characteristics , Int. J. Product. Res. , 36 , 459 – 474 ( 1998 ).
- Phillips , M. D. and Cho , B. R. , An Empirical Approach to Designing Product Specifications A Case Study , Qual. Eng. , 11 , 91 – 100 ( 1998 ).
- Phillips , M. D. and Cho , B. R. , Quality Improvement for Processes with Circular and Spherical Specification Regions , Qual. Eng. , 11 , 235 – 243 ( 1998 ).
- Dong , Z. , Tolerance Synthesis by Manufacturing Cost Modeling and Design Optimization , in Advanced Tolerancing Techniques , edited by H. C. Zhang , John Wiley & Sons , New York , 1997 , pp. 233 – 260 .
- Chase , K. W. , Greenwood , W. H. , Loosli , B. G. , and Haug-lund , L. F. , Least Cost Tolerance Allocation for Mechanical Assemblies with Automated Process Selection , Manuf. Rev. , 3 , 49 – 59 ( 1990 ).
- Pinel , J. F. and Roberts , K. A. , Tolerance Assignment in Linear Networks Using Nonlinear Programming , IEEE Trans. Circuit Theory , CT-19 , 475 – 479 ( 1972 ).
- Hillier , M. J. , A Systematic Approach to the Cost Optimization of Tolerances in Complex Assemblies , Bull. Mech. Eng. , 5 , 157 – 161 ( 1966 ).
- Spotts , M. F. , Allocation of Tolerances to Minimize Cost of Assembly , J. Eng. Ind. , 95 , 762 – 764 ( 1973 ).
- Parkinson , D. B. , Assessment and Optimization of Dimensional Tolerances , Computer-Aided Design , 17 , 191 – 199 ( 1985 ).
- Bennett , G. , Gupta , L. C. , Least Cost Tolerances—I , Int. J. Product. Res. , 8 , 65 – 74 ( 1970 ).
- Sutherland , G. H. and Roth , B. , Mechanism Design Accounting for Manufacturing Tolerances and Costs in Function Generating Problems , J. Eng. Ind. , 98 , 283 – 286 ( 1975 ).
- Lee , W. J. and Woo , T. C. , Tolerancing Its Distribution, Analysis, and Synthesis , Technical Report No. 86-30 , University of Michigan , Ann Arbor ( 1986 ).
- Peters , J. , Tolerancing the Components of an Assembly for Minimum Cost , J. Eng. Ind. , 92 , 677 – 682 ( 1970 ).
- Speckhart , F. H. , Calculation of Tolerance Based on a Minimum Cost Approach , J. Eng. Ind. , 94 , 447 – 453 ( 1972 ).
- Wilde , D. and Prentice , E. , Minimum Exponential Cost Allocation of Sure-Fit Tolerances , J. Eng. Ind. , 97 , 1395 – 1398 ( 1975 ).
- Michael , W. and Siddall , J. N. , The Optimization Problem with Optimal Tolerance Assignment and Full Acceptance , J. Mech. Design , 103 , 842 – 848 ( 1981 ).
- Michael , W. and Siddall , J. N. , The Optimal Tolerance Assignment with Less Than Full Acceptance , J. Mech. Design , 104 , 855 – 860 ( 1982 ).
- Dong , Z. , Hu , W. , and Xue , D. , New Production Cost-Tolerance Models for Tolerance Synthesis , J. Eng. Ind. , 116 , 199 – 206 ( 1994 ).