406
Views
12
CrossRef citations to date
0
Altmetric
Original Articles

A structured overview on the use of computational simulators for teaching statistical methods

ORCID Icon & ORCID Icon

References

  • Anderson-Cook, M., and S. Dorai-Raj. 2001. “An active learning in-class demonstration of good experimental design”. Journal of Statistics Education 9:1–8.
  • Antony, J. 2002. “Training for design of experiments using a catapult”. Quality and Reliability Engineering International 18:29–35.
  • Arzarello, F., et al. 2015. “Teaching and assessing with new methodological tools (Merlo): A new pedagogy?”. In First IMA International Conference on Barriers and Enablers to Learning Maths: Enhancing Learning and Teaching for All Learners, Glasgow, Scotland.
  • Birol, G., C. Ündey, and A. Çinar. 2002. “A modular simulation package for fed-batch fermentation: Penicillin production”. Computers & Chemical Engineering 26:1553–65.
  • Birol, I., C. Ündey, G. Birol, and A. Çinar. 2001. “Pensim: A web-based simulator for penicillin production”. International Journal of Engineering Simulation 2. http://www.intjes.co.uk/vol2num1/vol2num1.html#
  • Bloom, B. S., M. D. Engelhart, E. J. Furst, W. H. Hill, and D. R. Krathwohl. 1956. Taxonomy of educational objectives: The classification of educational goals. Handbook I: Cognitive domain, New York: David McKay.
  • Boon, M. A. A., A. Di Bucchianico, J. J. M. Rijpkema, and E. E. M. van Berkum. 2010. “Statlab: An interactive teaching tool for DoE”. In Progress in Industrial Mathematics at ECMI 2008, ed. A.D. Fitt, J. Norbury, H. Ockendon, E. Wilson, 663–8. Berlin: Springer.
  • Box, G. E. P. 1979. “Some problems of statistics and everyday life”. Journal of the American Statistical Association 74:1–4.
  • Box, G. E. P. 1991. “Teaching engineers experimental design with a paper helicopter”. Technical, Center for Quality and Productivity Improvement, University of Wisconsin-Madison.
  • Box, G. E. P. 1997. “Scientific method: The generation of knowledge and quality”. Quality Progress 30:47–50.
  • Burnham, A. J., J. F. MacGregor, and R. Viveros. 1999. “Latent variable multivariate regression modeling”. Chemometrics and Intelligent Laboratory Systems 48:167–180.
  • Carvalho, M. G. V., A. A. Martins, and M. M. L. Figueiredo. 2003. “Kraft pulpling of portuguese eucalyptus globulus: Effect of process conditions on yield and pulp properties”. Appita 56:267–274.
  • Castro, J. J., and F. J. Doyle III. 2004. “A pulp mill benchmark problem for control: Problem description”. Journal of Process Control 14:17–29.
  • Catapult: Using Computers to Solve Seemingly Simple Problems [Online]. Available: http://www.lcse.umn.edu/ specs/labs/catapult/index.html [Accessed March 2 2016].
  • Chien, I. L., and B. A. Ogunnaike. 1992. “Modeling and control of high-purity distillation columns”. In Preprints of the 1992 Annual AIChE Meeting, Miami Beach, p. Paper 2a.
  • Cintas, P. G., L. M. Almargo, and X. T. M. Llabrés. 2012. Industrial statistics with minitab. West Sussex, UK: John Wiley and Sons.
  • Darius, P., et al. 2003. “Using web-based tools for teaching statistical concepts and experimentation skills”. In IASE/ISI Satellite.
  • Darius, P. L., et al. 2000. “A collection of applets for visualizing statistical concepts”. In Proceedings in Computational Statistics 2000, Physica Verlag.
  • Darius, P. L., J. P. Ottoy, O. S. M. Thas, and B. Raeymaekers. 2002. “Applets for experimenting with statistical concepts”. In ICOTS 6 Proceedings.
  • De Ketelaere, B., K. Siebertz, D. van Bebber, and K. Rutten. 2014. “The garden sprinkler: An interactive web-based application for teaching design of experiments”. In ICOTS9 Proceedings.
  • Downs, J. J., and E. Vogel. 1993. “A plant-wide industrial process control problem”. Computers & Chemical Engineering 17:245–255.
  • Env2exp [Online]. Available: http://lstat.kuleuven.be/env2exp/ DOE/index.html [Accessed March 3 2016].
  • Etkind, M., R. S. Kenett, and U. Shafrir. 2010. “The evidence-based management of learning: diagnosis and development of conceptual thinking with meaning equivalence reusable learning objects (Merlo)”. In 8th International Conference on Teaching Statistics (ICOTS8), Ljubljana, Slovenia.
  • Garden Sprinkler Simulation [Online]. Available: https://pers-www. kuleuven.be/∼u0059569/doe/sprinkler/default.php [Accessed March 2 2016].
  • Gins, G., J. Vanlaer, P. Van den Kerkhof, and J. F. M. Van Impe. 2014. “The raymond simulation package - generating raypresentative monitoring data to design process monitoring and control algorithms”. Computers & Chemical Engineering 69:108–118.
  • Greenfield Research [Online]. Available: http://www.greenfieldresearch.co.uk/sim.html [Accessed March 3 2016].
  • Greenfield, T., and A. V. Metcalfe. 2007. Design and analyze your experiment using minitab. Milton Park, UK: Hodder Arnold.
  • Hahn, J., and T. F. Edgar. 2001. “A gramian based approach to nonlinearity quantification and model classification”. Industrial & Engineering Chemistry Research 40:5724–31.
  • Hunter, W. G. 1977. “Some ideas about teaching design of experiments, with 25 examples of experiments conducted by students”. The American Statistician 31: 12–17.
  • Ingham, J., I. J. Dunn, E. Heinzle, and J. E. Přenosil. 1994. Chemical engineering dynamics - Modelling with pc simulation. Weinheim [etc.]: VCH.
  • Kenett, R. S., and D. Steinberg. 1987. “Some experiences teaching factorial designs in introductory statistics courses”. Journal of Applied Statistics 14:219–228.
  • Kenett, R. S., and S. Zacks. 1998. Modern industrial statistics - Design and control of quality and reliability. Pacific Grove: Duxbury Press.
  • Kenett, R. S., and S. Zacks. 2014. Modern industrial statistics: With applications in R, Minitab and Jmp (2nd ed.). West Sussex, UK: John Wiley & Sons.
  • Knogler, M. 2014. Investigating student interest in the context of problem-based learning a design-based research Study. Technische Universität München (TUM), School of Education.
  • Kopas, D. A., and P. R. McAllister. 1992. “Process improvement exercises for the chemical industry”. American Statistician 46:34–41.
  • Ku, W., R. H. Storer, and C. Georgakis. 1995. “Disturbance detection and isolation by dynamic principal component analysis”. Chemometrics and Intelligent Laboratory Systems 30:179–196.
  • Luyben, W. L. 1990. Process modeling, simulation and control for chemical engineering (2nd ed.). New York: McGraw-Hill.
  • Montgomery, D. C., G. C. Runger, and N. F. Hubele. 2011. Engineering statistics. Hoboken, NJ: John Wiley and Sons.
  • Moon, H. 2010. Design and analysis of computer experiments for screening input variables. The Ohio State University, Graduate Program in Statistics.
  • Morrison, J. 2009. Statistics for engineers: An introduction. West Sussex, UK: John Wiley and Sons.
  • Pensim - a Web Based Program for Dynamic Simulation of Fed-Batch Penicillin Production [Online]. Available: http://simulator.iit.edu/web/pensim/ [Accessed March 3 2016].
  • Ragasa, C. Y. 2008. “A comparison of computer-assisted instruction and the traditional method of teaching basic statistics”. Journal of Statistics Education 16:1–9.
  • Rato, T. J., and M. S. Reis. 2011. “Statistical process control of multivariate systems with autocorrelation”. In Computer-aided chemical engineering (Vol. 29), eds. E. N. Pistikopoulos, M. C. Georgiadis, and A. Kokossis, pp. 497–501. Amsterdam: Elsevier.
  • Rato, T. J., and M. S. Reis. 2013a. “Advantage of using decorrelated residuals in dynamic principal component analysis for monitoring large-scale systems”. Industrial & Engineering Chemistry Research 52:13685–698.
  • Rato, T. J., and M. S. Reis. 2013b. “Fault detection in the tennessee eastman process using dynamic principal components analysis with decorrelated residuals (Dpca-Dr)”. Chemometrics and Intelligent Laboratory Systems 125:101–8.
  • Rato, T. J., and M. S. Reis. 2014. “Non-causal data-driven monitoring of the process correlation structure: A comparison study with new methods”. Computers & Chemical Engineering 71:307–322.
  • Rato, T. J., and M. S. Reis. 2015a. “On-line process monitoring using local measures of association. Part I: Detection performance”. Chemometrics and Intelligent Laboratory Systems 142:255–264.
  • Rato, T. J., and M. S. Reis. 2015b. “On-line process monitoring using local measures of association. Part II: Design issues and fault diagnosis”. Chemometrics and Intelligent Laboratory Systems 142:265–275.
  • Raymond [Online]. Available: http://cit.kuleuven.be/ biotec/ raymond.php [Accessed March 3 2016].
  • Reis, M. S., and P. M. Saraiva. 2001. “A structured approach for reducing paper curl: modelling strategies and simulation results”. In CHEMPOR'2001, 8th International Chemical Engineering Conference, Aveiro, Portugal.
  • Reis, M. S., and P. M. Saraiva. 2005. “Integration of data uncertainty in linear regression and process optimization”. AIChE Journal 51:3007–19.
  • Reis, M. S., and P. M. Saraiva. 2006a. “Heteroscedastic latent variable modelling with applications to multivariate statistical process control”. Chemometrics and Intelligent Laboratory Systems 80:57–66.
  • Reis, M. S., and P. M. Saraiva. 2006b. “Multiscale statistical process control with multiresolution data”. AIChE Journal 52:2107–19.
  • Reis, M. S., and P. M. Saraiva. 2008. “Multivariate and multiscale data analysis”. In Statistical practice in business and industry, eds. S. Coleman, T. Greenfield, D. Stewardson, and D. C. Montgomery, Chichester: Wiley, pp. 337–370.
  • Rice Virtual Lab in Statistics [Online]. Rice Virtual Lab. Available: http://onlinestatbook.com/rvls.html [Accessed March, 3 2016].
  • Rootzén, H. 2015. “Individualized learning through non-linear use of learning objects: With examples from math and stat”. In 14th European Conference on e-Learning (ECEL 2015), pp. 500–506.
  • Santy, W., and B. Einwalter. 1997. “Comparison of classroom toys for teaching experimental design”. Quality Engineering 10:75–83.
  • Schwarz, C. J. 2003. Online Experimental Design [Online]. Available: http://people.stat.sfu.ca/∼cschwarz/ExpDesign/ [Accessed August, 18 2016].
  • Shafrir, U., and R. S. Kenett. 2015. “Concept science evidence-based MERLO learning analytics”. In Handbook of applied learning theory and design in modern education. Hershey, PA: IGI Global.
  • Shi, R., and J. F. MacGregor. 2000. “Modeling of dynamic systems using latent variable and subspace methods”. Journal of Chemometrics 14:423–439.
  • Statlab - an Interactive Teaching Tool for Doe [Online]. Department of Mathematics and Computer Science, Eindhoven University of Technology. Available: http://www.win.tue.nl/statlab/ [Accessed March 7 2016].
  • Tennessee Eastman Challenge Archive [Online]. Available: http://depts.washington.edu/control/LARRY/TE/download.html [Accessed March 3 2016].
  • Textbooks for Learning Statistics - Public Cast E-Books [Online]. Massey University. Available: http://cast.massey.ac.nz [Accessed March 3 2016].
  • Virtual Bioreactor [Online]. Available: http://jimi.cbee. oregon-state. edu/virtual_bioreactor/bioreactor.php?goto=Home [Accessed March 2 2016].
  • Virtual Catapult [Online]. SigmaZone.com. Available: http:// www.sigmazone.com/SL/Catapult/ [Accessed March 2 2016].
  • Virtual Labs (in Portuguese) [Online]. Available: http:// labvirtual.eq.uc.pt/ [Accessed March 2 2016].
  • Virtual Labs at I.I.T. Delhi [Online]. Available: http:// iitd.vlab.co.in/index.php [Accessed March 7 2016].
  • Water Rocket Simulation [Online]. Available: http://cjh. polyplex. org/rockets/simulation/ [Accessed March 2 2016].
  • Williams, T. J., and R. E. Otto. 1960. “A generalized chemical processing model for the investigation of computer control”. Transactions of the American Institute of Electrical Engineers, Part I: Communication and Electronics 79:458– 473.
  • Wisnewski, P. A., F. J. Doyle III, and F. Kayihan. 1997. “Fundamental continuous-pulp-digester model for simulation and control”. AIChE Journal 43:3175–92.
  • Wood, R. K., and M. W. Berry. 1973. “Terminal composition of a binary distillation column”. Chemical Engineering Science 28:1707–17.
  • Ying, Y., M. Rao, and Y. Sun 1992. “Bilinear control strategy for paper-making process”. Chemical Engineering Communications 111:13–28.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.