2,774
Views
17
CrossRef citations to date
0
Altmetric
Articles

Probabilistic modeling of harvested GSM energy and its application in extending UHF RFID tags reading range

, &
Pages 473-484 | Received 10 Oct 2012, Accepted 09 Nov 2012, Published online: 03 Jan 2013

References

  • Polastre J, Hill J, Culler D. Versatile low power media access for wireless sensor networks, SenSys’04. In: Proceedings of the Second International Conference on Embedded Networked Sensor Systems; 2004; Baltimore, USA. p. 95–107..
  • Gu, L, and Stankovic, JA, 2004. Radio-triggered wake-up capability for sensor networks, Proc. – IEEE Real-time Embedded Technol. Appl. Symp. 10 (2004), pp. 27–36.
  • Ruzzelli, AG, O’Hare, GMP, and Jurdak, R, 2008. Merlin: cross-layer integration of MAC and routing for low duty-cycle sensor networks, Ad Hoc Networks. 6 (2008), pp. 1238–1257.
  • Papadimitriou, I, and Georgiadis, L, 2006. Energy-aware routing to maximize lifetime in wireless sensor networks with mobile sink, J. Commun. Software Syst. (JCOMSS). 2 (2006), pp. 141–151.
  • Vullers, RJM, van Schaijk, R, Doms, I, van Hoof, C, and Mertens, R, 2009. Micropower energy harvesting, Solid-State Electron. 53 (2009), pp. 684–693.
  • Nishimoto H, Kawahara Y, Asami T. Prototype implementation of ambient RF energy harvesting wireless sensor networks. In: Proc. IEEE Seasors. 2010; Kona, USA. p, 1282–1287..
  • Sample A, Smith JR. Experimental results with two wireless power transfer systems. In: Proc. IEEE Radio Wireless Symp. 2009. 2009: San Diego, USA. p. 16–18..
  • Arrawatia M, Baghini MS, Kumar G. RF energy harvesting system from cell towers in 900 MHz band. In: 2011 National Conference on Communications, NCC; 2011. p. 1–5..
  • Albasha L, Heydari Nasab S, Asefi M, Qaddoumi N. Investigation of RF signal energy harvesting. Active Passive Electron. Compon. 2010:1–6..
  • Yan H, Montero JM, Akhnoukh A, de Vreede L, Burghartz J. An integration scheme for RF power harvesting. In: Proc. STW Annual Workshop on Semiconductor Advances for Future Electronics and Sensors; 2005. p. 64–66..
  • Xie, K, Liu, Y-M, Zhang, H-L, and Fu, L-Z, 2011. Harvest the ambient AM broadcast radio energy for wireless sensors, J. Electromagn. Waves Appl. 25 (2011), pp. 2054–2065.
  • Dobkin, D, 2008. The RF in RFID. Burlington: Elsevier; 2008.
  • Michael K, McCathie L. The pros and cons of RFID in supply chain management. In: Proceedings of the International Conference on Mobile, Business (ICMB05); 2005. p. 623–629..
  • Buettner M, Greenstein B, Wetherall D, Smith JR. Revisiting smart dust with RFID sensor networks. Proceedings of the 7th ACM Workshop on Hot Topics in Networks; 2008 Oct; Calgary, Canada..
  • Roy, S, Jandhyala, V, Smith, JR, Wetherall, DJ, Otis, BP, Chakraborty, R, Buettner, M, Yeager, DJ, Ko, Y, and Sample, AP, 2010. RFID: From supply chains to sensor nets, Proc. IEEE. 98 (2010), pp. 1583–1592.
  • Rabaey JM. The swarm at the edge of the cloud a new perspective on wireless. In: 2011 Symposium on VLSI Circuits Digest (VLSIC); 2011. p. 6–8..
  • Marrocco, G, 2010. Pervasive electromagnetics: Sensing paradigms by passive RFID technology, IEEE Wireless Commun. 17 (2010), pp. 10–17.
  • Souryal MR, Novotny DR, Kuester DG, Guerrieri JR, Remley KA. Impact of RF interference between a passive RFID system and a frequency hopping communications system in the 900 MHz ISM band. In: IEEE International Symposium on Electromagnetic Compatibility; 2010. p. 495–500..
  • Dimitriou AG, Bletsas A, Polycarpou AC, Sahalos JN. Theoretical findings and measurements on planning a UHF RFID system inside a room. Radioengineering. 2011;20:387–397..
  • Landt, J, 2005. The history of RFID, IEEE Potentials. 24 (2005), pp. 8–11.
  • EPCglobalInc. Class 1 generation 2 UHF air interface protocol standard “gen 2”, v1.2.0. Tech. Rep., October 2008..
  • Lazaro, A, Girbau, D, and Villarino, R, 2009. Effects of interferences in UHF RFID systems, Prog. Electromagn. Res. 98 (2009), pp. 425–443.
  • Solic P, Radic J, Rozic N. Software defined radio based implementation of RFID tag in next generation mobiles. IEEE Trans. Consumer Electron. 2012;58:1051–1055..
  • ETSI TR 145 903 V11.0.0. Digital cellular telecommunications system (phase 2+). Technical Report; October 2012. Available from: http://www.etsi.org/deliver/etsi_tr/145900_145999/145903/11.00.00_60/tr_145903v110000p.pdf.
  • Nikitin PV, Rao K. Performance limitations of passive UHF RFID systems. In: IEEE Antennas and Propagation Society International Symposium; 2006. p. 1011–1014..
  • Nikitin, PV, and Rao, K, 2006. Theory and measurement of backscattering from RFID tags, IEEE Antennas Propagat. Mag. 48 (2006), pp. 212–218.
  • Karthaus, U, 2003. Fully integrated passive UHF RFID transponder IC with 16.7 μW minimum RF input power, IEEE J. Solid-State Circuits 38 (2003), pp. 1602–1608.
  • NXP Semiconductors. UCODE G2iL(+) series tag ICs. Available from: http://www.nxp.com/products/identification_and_security/smar-t_label_and_tag_ics/ucode/..
  • Impinj. Monza 5 series tag ICs. Available from: http://www.impinj.com/support/downloadable_documents.aspx..
  • Alien Technology. Higgs 4 series tag ICs. Available from: http://www.ali-entechnology.com/tags/rfid_ic.php..
  • Sasaki A.Differential-drive CMOS rectifier for UHF RFIDs with 66% PCE at 12 dBm Input. In: IEEE Asian Solid-State Circuits Conference; 2008. p. 105–108..
  • Rabaey JM. Powering and communicating with mm-size implants. In: Design, Automation & Test in Europe Conference & Exhibition; 2011. p. 1–6..
  • Wong, S-Y, and Chen, C, 2011. Power efficient multi-stage CMOS rectifier design for UHF RFID tags, Integration, VLSI J. 44 (2011), pp. 242–255.
  • Monti, G, Congedo, F, de Donno, D, and Tarricone, L, 2012. Monopole-based rectenna for microwave energy harvesting of UHF RFID systems, Prog. Electromagn. Res. C 31 (2012), pp. 109–121.
  • Kamalinejad P, Mirabbasi S, Leung VCM. An efficient CMOS rectifier with low-voltage operation for RFID tags. In: Proceedings of the 2011 International Green Computing Conference and Workshops; 2011. p. 1–6..
  • Bakhtiar AS. An efficient CMOS RF power extraction circuit for long-range passive RFID tags [Master of Science Thesis]. University of British Columbia; 2011..
  • Din, NM, Chakrabarty, CK, Bin Ismail, A, Devi, KKA, and Chen, W-Y, 2012. Design of RF energy harvesting system for energizing low power devices, Prog. Electromagn. Res. 132 (2012), pp. 49–69.