165
Views
3
CrossRef citations to date
0
Altmetric
Articles

Experimental investigation of vibration monitoring technique for online detection of bearing fault in induction motors

, , &
Pages 496-506 | Received 30 Sep 2012, Accepted 07 Nov 2012, Published online: 18 Dec 2012

References

  • Dente JA, da Costa Branco PJ. A simple pattern recognition approach for monitoring incipient stator faults in salient-pole synchronous generators. Prog. Electromagn. Res. B. 2012;39:163–178..
  • Rezig, A, Mekideche, MR, and Djerdir, A, 2010. Effect of rotor eccentricity faults on noise generation in permanent magnet synchronous motors, Prog. Electromagn. Res. C. 15 (2010), pp. 117–132.
  • Akbari, H, 2012. Analytical computation of reluctance synchronous machine inductances under different eccentricity faults, Prog. Electromagn. Res. M. 24 (2012), pp. 29–44.
  • Kuptsov, VV, Sarvarov, AS, and Petushkov, MY, 2012. A new approach to analysis of induction motors with rotor faults during startup based on the finite element method, Prog. Electromagn. Res. B. 45 (2012), pp. 269–290.
  • Akbari, H, Meshgin-Kelk, H, and Milimonfared, J, 2011. Extension of winding function theory for radial and axial nonuniform air gap in salient pole synchronous machines, Prog. Electromagn. Res. 114 (2011), pp. 407–428.
  • Verucchi, CJ, Acosta, G, and Benger, F, 2008. A review on fault diagnosis of induction machines, Latin Am. Appl. Res. 38 (2008), pp. 113–121.
  • Blödt, M, Granjon, P, Raison, B, and Rostaing, G, 2008. Models for bearing damage detection in induction motors using stator current monitoring, IEEE Trans. Indus. Electron. 55 (2008), pp. 1813–1822.
  • Torkaman, H, and Afjei, E, 2010. FEM analysis of angular misalignment fault in SRM magnetostatic characteristics, Prog. Electromagn. Res. 104 (2010), pp. 31–48.
  • Cabanas MF, Pedrayes González F, Melero MG, Rojas Garca CH, Orcajo GA, Cano Rodrguez JM, Norniella JG. Insulation fault diagnosis in high voltage power transformers by means of leakage flux analysis. Prog. Electromagn. Res. 2011;114:211–234..
  • Harris T. Bearing analysis. 4th ed. New York: Wiley-Interscience; 2001..
  • Thorsen, OV, and Dalva, M, 1999. Failure identification and analysis for high-voltage induction motors in the petrochemical industry, IEEE Trans. Ind. Appl. 35 (1999), pp. 810–818.
  • Touati, S, Ibtiouen, R, Touhami, O, and Djerdir, A, 2011. Experimental investigation and optimization of permanent magnet motor based on coupling boundary element method with permeances network, Prog. Electromagn. Res. 111 (2011), pp. 71–90.
  • Rezig A. Analyse tridimensionnel des phénomènes vibratoires dans les machines électriques [Three-dimensional analysis of vibration phenomena in electrical machines] [PhD thesis]. University of Batna, Algeria; May 2011..
  • Lecointe, J-P, Cassoret, B, and Brudny, J-F, 2011. Distinction of toothing and saturation effects on magnetic noise of induction motors, Prog. Electromagn. Res. 112 (2011), pp. 125–137.
  • MacFadden, P, and Smith, J, 1984. Model for the vibration produced by a single point defect in rolling element bearing, J. Sound Vib. 96 (1984), pp. 69–82.
  • Sawalhi N, Randall RB. Simulating gear and bearing interactions in the presence of faults Part I. The combined gear bearing dynamic model and the simulation of localised bearing faults. Mech. Syst. Signal Process. 2008:22:1924–1951..
  • Thomson W, Glimore R. Motor current signature analysis to detect fault in induction motors drives-fundamental, data interpretation and industrial cases histories. Proceeding of 32nd Turbomachinery Symposium; 2003; TX, USA..
  • Riley, CM, Lin, BK, Habetler, TG, and Kliman, GB, 1999. Stator current harmonics and their causal vibration: A preliminary investigation of sensorless vibration monitoring applications, IEEE Trans. Ind. Appl. 35 (1999), pp. 94–99.
  • Obaid R, Habetler T. Current-based algorithm for mechanical fault detection in induction motors with arbitrary load condition. In: IEEE Industry Applications Conferences, 38th IAS Annual Meeting; 2003 Oct 12–16; USA. p. 1347–1351..

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.