References
- Guha D, Antar YMM. Microstrip and printed antennas. Chichester, United Kingdom: Wiley; 2017.
- Li Z, Haigh A, Soutis C, et al. Principles and applications of microwave testing for woven and non-woven carbon fibre-reinforced polymer composites: a topical review. Appl Compos Mater. 2018;25:965–982. doi: 10.1007/s10443-018-9733-x
- Moulart A, Marrett C, Colton J. Polymeric composites for use in electronic and microwave devices. Polym Eng Sci. 2004;44:588–597. doi: 10.1002/pen.20053
- Deb K, Bera A, Bhowmik KL, et al. Conductive polyaniline on paper as a flexible electronic material with controlled physical properties through vapor phase polymerization. Polym Eng Sci. 2018;58:2249–2255. doi: 10.1002/pen.24845
- Manzari S, Occhiuzzi C, Nawale S, et al. Humidity sensing by polymer-loaded UHF RFID antennas. IEEE Sensors J. 2012;12:2851–2858. doi: 10.1109/JSEN.2012.2202897
- Feili D, Pagel N, Ngo VL, et al. Cu based patch antenna on polymer substrate for flexible wireless sensor systems applications. Proc Eurosensors XXIV. 2010;5:890–893.
- Liyakath RA, Takshi A, Mumcu G. Multilayer stretchable conductors on polymer substrates for conformal and reconfigurable antennas. IEEE Antennas Wireless Propag Lett. 2013;12:603–606. doi: 10.1109/LAWP.2013.2260123
- Koulouridis S, Kiziltas G, Zhou Y, et al. Polymer–ceramic composites for microwave applications: fabrication and performance assessment. IEEE Trans Microw Theory Tech. 2007;54:4202–4208. doi: 10.1109/TMTT.2006.885887
- Geetha S, Satheesh Kumar KK, Rao CRK, et al. EMI shielding: methods and materials-a review. J. Appl Polym Sci. 2009;112:2073–2086. doi: 10.1002/app.29812
- Bancroft R. Microstrip and printed antenna design. New York, United States: Scitech; 2009.
- Yao L, Wang X, Xu F, et al. Effect of wire space and weaving pattern on performance of microstrip antennas integrated in the three dimensional orthogonal woven composites. Appl Compos Mater. 2012;19:21–30. doi: 10.1007/s10443-010-9177-4
- Xu F, Yao L, Zhao D, et al. Effect of weaving direction of conductive yarns on electromagnetic performance of 3D integrated microstrip antenna. Appl Compos Mater. 2013;20:827–838. doi: 10.1007/s10443-012-9302-7
- Mazar H. Human radio frequency exposure limits: an update of reference levels in Europe USA, Canada, China, Japan and Korea. International symposium on electromagnetic compatibility; 2016. p. 467–473.
- Colom X, Rahalli A, Cañavate J, et al. Properties and optimal manufacturing conditions of chicken feathers thermoplastic biocomposites. J Compo Mater. 2015;49(3):295–308. doi: 10.1177/0021998313518569
- Avaialble from: https://www.cst.com/
- IEEE recommended practice for measurements and computations of radio frequency electromagnetic fields with respect to human exposure to such fields, 100 kHz 300 GHz, IEEE Std C95.3-2002 (Revision of IEEE Std C95.3-1991), no. 4, pp. 1–126, IEEE-SA Standards Board, 2002.
- IEC/IEEE draft standard for determining the peak spatial average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz–6 GHz. Part 1: general requirements for using the finite difference time domain (FDTD) method for SAR calculations, P62704-1/D2, Oct 2013.
- Bayram Y, Zhou Y, Shim BS, et al. E-Textile conductors and polymer composites for conformal lightweight antennas. IEEE Trans Ant Prop. 2010;58:2732–2736. doi: 10.1109/TAP.2010.2050439
- Pavuluri SK, Wang CH, Sangster AJ. A high-performance aperture-coupled patch antenna supported by a micromachined polymer ring. IEEE Antennas Wireless Propag Lett. 2008;7:283–286. doi: 10.1109/LAWP.2008.928468
- Ehteshami N, Sathi V, Ehteshami M. Experimental investigation of a circularly polarised flexible polymer/composite microstrip antenna for wearable applications. IET Microw Ant Propag. 2012;6:1681–1686. doi: 10.1049/iet-map.2012.0395