https://orcid.org/0000-0002-1401-3297
References
- Felic G, Evans R. Study of heat sink EMI effects in SMPS circuits. IEEE EMC International Symposium; February 2001; Montreal, Canada, p. 254–259. doi:10.1109/ISEMC.2001.950623
- Kulanayagam J, Hagmann JH, Hoffmann KF, et al. New efficient filter design for a heat sink. Adv Radio Sci. 2011;9(1):317–321. doi:https://doi.org/10.24084/repqj09.395.
- Liu Q, Jiao X, Li J, et al. Modeling absorbing materials for EMI mitigation. IEEE EMC International Symposium, Dresden, Germany, 2015, p. 1548–1552. doi:10.1109/ISEMC.2015.7256405
- Georgerian R, Montrose M. Product safety and the heat sink dilemma of minimizing radiated emissions and maximizing thermal cooling. IEEE EMC International Symposium; September 2003; Istanbul, Turkey, p. 134–137. doi:10.1109/ISEMC.2003.1236578
- Chou HH, Lee YS. Experimental investigation and analysis of EMI in stacked I/O connectors of PCB. J Electromagn Waves Appl. 2016;30(2):195–206. doi:https://doi.org/10.1080/09205071.2015.1099477.
- Ho CY, Chen KS, Horng TS, et al. Prediction of radiated emissions from microstrip components for RF/microwave circuits using measurement of common-mode current. J Electromagn Waves Appl. 2013;27(18):2355–2365. doi:https://doi.org/10.1080/09205071.2013.849209.
- Basyigit IB, Dogan H, Helhel S. The effect of aperture shape, angle of incidence and polarization on shielding effectiveness of metallic enclosures. J Microwave Power Electromagn Energy. 2018;53(2):115–127. doi:https://doi.org/10.1080/08327823.2019.1607496.
- Ahn C, Oh J. Resistive grounding technique of the heat sink for reducing radiation noise. J Electr Eng Technol. 2014;9(5):1724–1728. doi:https://doi.org/10.5370/JEET.2014.9.5.1724.
- Chiappe J. Additional techniques to reduce heat sink emissions utilizing RF absorbers. IEEE EMC International Symposium, Pittsburg, PA, USA, 2012, p. 56–63. doi: 10.1109/ISEMC.2012.6351750
- Wang C, Drewniak JL, Knighten JL, et al. Grounding of heat pipe, heat spreader and heat sink structures for EMI mitigation. IEEE EMC International Symposium, Montreal, Canada, 2001, p. 916–920. doi: 10.1109/ISEMC.2001.950507
- Shen G, Yang S, Sun J, et al. Maximum radiated emissions evaluation for the heatsink/IC structure using the measured near electrical field. IEEE Trans Electromagn Compat. 2017;59(5):1408–1414.
- Lu J, Dawson F. EMC computer modeling techniques for CPU heat sink simulation. IEEE Trans Magn. 2006;42(10):3171–3173.
- Basyigit IB, Genc A, Helhel S. Effect of orientation within the enclosures on electrical shielding effectiveness performance. Turkish J Electr Eng Computer Sci. 2019;27(4):3088–3097. doi:https://doi.org/10.3906/elk-1902-68.
- Karaman AB, Kocakusak A, Genc A, et al. The effect of feeding point on electromagnetic emission due to heat sink. PIERS Photonics & Electromagnetics Research Symposium, Roma, Italy, 2019, p. 54.