References
- Lukaszewicz H, Ward C, Potter D. The engineering aspects of automated prepreg layup: history, present and future. Compos Part B. 2012;43:997–1009.10.1016/j.compositesb.2011.12.003
- Tanabe D, Imamura S, Nishiyabu K, et al. Effects of near-infrared heating and high frequency induction roller heating in continuous tape layup molding of CFRTP. Trans JSME (in Japanese). 2016;82(843):16-00115.
- Mark Forged Company, US. 2016. Available from: https://markforged.com/
- Klift F, Koga Y, Todoroki A, et al. 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens. Open J Compos Mater. 2016;6:18–27.10.4236/ojcm.2016.61003
- Namiki M, Ueda M, Todoroki A, et al. 3D printing of continuous fiber reinforced plastic. In: Proceedings of the society of the advancement of material and process engineering; 2014 Jun 2–5. Seattle; 2014, p. 6.
- Matsuzaki R, Ueda M, Namiki M, et al. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Sci Rep. 2016;6:23058. Available from: http://www.nature.com/articles/srep2305810.1038/srep23058
- Li N, Li Y, Liu S. Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing. J Mater Process Technol. 2016;238:218–225.10.1016/j.jmatprotec.2016.07.025
- Mitsubishi Gas Chemical Company. Technical Report. Available from: https://www.mgc.co.jp/seihin/a/nmxd6/crystallization.html
- Hirooka N, Yamawaki M, Kouno Y. Molded products of mechanical properties using the preform by 3D printer. In 61st FRP CON-EX 2016 A-13. Hiroshima, Japan. pp. 157–158.
- Ueda M, Miura K, Jeong T. In situ observation of kink-band formation in a unidirectional carbon fiber reinforced plastic by X-ray computed tomography imaging. Adv Compos Mater. 2016;25(1):31–43.10.1080/09243046.2014.973173
- Takeuchi K, Matsuzaki R, Okabe T, et al. Process design for heat fusion of thermoplastic composites using molecular dynamics and a response surface method. Adv Compos Mater. 2016;25(Suppl 1):33–49.10.1080/09243046.2016.1216726
- Yamanaka Y, Todoroki A, Ueda M, et al. Fiber line optimization in single ply for 3D printed composites. Open J Compos Mater. 2016;6(4):121–131.10.4236/ojcm.2016.64012