References
- Mortazavian S, Fatemi, A. Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites. Compos Part B, 2015; 72:116–129.
- Kelly A, Tyson W. Tensile properties of fiber-reinforced metals: copper/tungsten and copper/molybdenum. J Mech Phys Solids. 1965;13:329–350.10.1016/0022-5096(65)90035-9
- Van Hattum FWJ, Bernardo CA. A study of the thermomechanical properties of carbon fiber-polypropylene composites. Polym Compos. 1999;20:683–688.10.1002/(ISSN)1548-0569
- Baxter WJ. The strength of metal matrix composites reinforced with randomly oriented discontinuous fibers. Metal Trans. 1998;23A:3045–3053.
- Kang G, Yang C, Zhang J. Tensile properties of randomly oriented short d-Al2O3 fiber reinforced aluminum alloy composites. I. Microstructure characteristics, fracture mechanisms and strength prediction. Compos Part A. 2002; 33:647–656.
- Fu SY, Lauke B. Effects of fiber length and fiber orientation distribution the tensile strength of short-fiber-reinforced polymers. Compos Sci Techol. 1996;56:1179–1190.10.1016/S0266-3538(96)00072-3
- Fu SY, Lauke B. The elastic modulus of misaligned short-fiber-reinforced polymers. Compos Sci Technol. 1998;58:389–400.10.1016/S0266-3538(97)00129-2
- Fu SY, Lauke B. An analytical characterization of the anisotropy of the elastic modulus of misaligned short-fiber-reinforced polymers. Compos Sci Technol. 1998;58:1961–1972.10.1016/S0266-3538(98)00033-5
- Scheider I, Chen Y, Hinz A, et al. Size effects in short fibre reinforced composites. Eng Frac Mech. 2013;100:17–27.10.1016/j.engfracmech.2012.05.005
- Sato Y, Okabe T, Higuchi R, et al. Multiscale approach to predict crack initiation in unidirectional off-axis laminates. Adv Compos Mater. 2014;23(5–6):461–475.10.1080/09243046.2014.915100
- Yoshimura A, Hosoya R, Koyanagi J, et al. X-ray computed tomography used to measure fiber orientation in CFRP laminates. Adv Compos Mater. 2016;25:19–30.10.1080/09243046.2014.959240
- Ueda M, Mimura K, Jeong TK. X-ray In situ observation of kink-band formation in a unidirectional carbon fiber reinforced plastic by X-ray computed tomography imaging. Adv Compos Mater. 2016;25:31–43.10.1080/09243046.2014.973173
- Weibull W. A statistical distribution function of wide applicability. J Appl Mech. 1951;18:293–305.
- Iarve EV, Kim R, Mollenhauer D. Three-dimensional stress analysis and Weibull statistics based strength prediction in open hole composites. Compos Part A. 2007; 38:174–185.
- Wisnom MR. Relationship between strength variability and size effect in unidirectional carbon fibre/epoxy. Composites 1991;22:47–52.10.1016/0010-4361(91)90102-M
- Wisnom MR. The relationship between tensile and flexural strength of unidirectional composites. J Compos Mater. 1992;26:1173–1180.10.1177/002199839202600805
- Wisnom MR, Atkinson JW. Reduction in tensile and flexural strength of unidirectional glass fibre-epoxy with increasing specimen size. Compos Struct. 1997;38:405–411.10.1016/S0263-8223(97)00075-5
- Wisnom MR. Size effects in the testing of fibre-composite materials. Compos Sci Technol. 1999;59:1937–1957.10.1016/S0266-3538(99)00053-6
- Higuchi R, Okabe T, Ohtake Y, et al. Numerical simulation of damage progression and fracture in structures made of 3D woven ceramic matrix composites. Adv Compos Mater. 2016;25:209–227.10.1080/09243046.2015.1075672
- Sutherland LS, Shenoi RA, Lewis SM. Size and scale effects in compos: I. Literature review. Compos Sci Technol. 1999; 59:209–220.
- Hashemi S, Khamsehnezhad A. Analysis of tensile and flexural strength of single and double gated injection moulded short glass fiber reinforced PBT/PC composites. Plast Rubber Compos. 2010;39:343–349.10.1179/174328910X12647080902934
- Wang ASD, Tung RW, Sanders BA. Size effect on strength and fatigue of a short fiber composite material. In: Vinson JR, editor. Emerging technologies in aerospace structures, design, structural dynamics and materials. New York (NY): ASME; 1980. p. 37–52.
- Sawada T, Aoyama H. Probabilistic strength estimation in consideration of size effects and load modes for glass-short-fiber-reinforced thermosetting plastics. In Proceedings of the 20th International Conference on Composite Materials (ICCM20); 2015: Copenhagen.
- Moosbrugger E, Demonte M. Multiaxial fatigue behavior of a short-fiber reinforced polyamide–experiments and calculations. Mat-wiss U Werkstofftech. 2011; 42:950–957.
- Tsai SW. Strength characteristics of composite materials. NASA CR-224. California (CA): Philco Corp Newport Beach; 1965.
- Adbin Y, Lomov SV, Jain A. Geometric characterization & micro-structural modelling of short steel fiber composites. Compos Part A. 2014; 67:171–180.
- Sakin R, Ay İrfan I. Statistical analysis of bending fatigue life data using Weibull distribution in glass-fiber reinforced polyester composites. Mater Des. 2008;29:1170–1181.10.1016/j.matdes.2007.05.005
- Fujisawa Y, Matsusue K, Takahara K. Torsional strength of pressureless-sintered silicon nitride. Japan: Technical Report of National Aerospace Lab; 1985. (TR-877).
- Hara E, Yokozeki T, Hatta H, et al. Out-of-plane tensile modulus of CFRP laminates by 3-point bending test. Adv Compos Mater. 2015;24(3):221–237.10.1080/09243046.2014.960145
- Hara E, Yokozeki T, Hatta H, et al. Comparison of out-o –plane tensile strength of aligned CFRP obtained by 3-point bending and direct loading tests. Compos Part A. 2012; 43:1828–1836.
- Pilkey WD. Formulas for stress, strain, and structural matrices. New Jersey (NJ): Wiley; 2005. p. 299–300.