Optimal fiber distribution for tensile properties of injection molded composite

References

• Termonia Y. Theoretical study of the stress transfer in single fiber composites. J Mater Sci. 1987;22:504–508.10.1007/BF01160761
   Web of Science ®Google Scholar
• Brockmuller KM, Friedrich K. Elastoplastic stress analysis of a short-fiber reinforced composites using a three-dimensional finite element model with several close to reality features. J Mater Sci. 1992;27:6506–6512.10.1007/BF00576304
   Web of Science ®Google Scholar
• Robinson IM. Review: the influence of fiber aspect ratio on the deformation of discontinuous fiber-reinforced composites. J Mater Sci. 1994;29:4663–4677.10.1007/BF00356507
   Web of Science ®Google Scholar
• Lee IS, Lee DJ. The fiber damage and mechanical properties of short-fiber reinforced composite depending on nozzle size variations in injection/mold sides. KSME J. 2001;25(4):564–573.
   Google Scholar
• Pyrz R. Recent trends in morphological characterization of micro structures in polymer composites. Proceedings of the 18th RISO International Symposium on Materials Science: Polymeric Composites; Copenhagen, Denmark: 1997. p. 81–99.
   Google Scholar
• Fu SY, Lauke B, Mäder E, et al. Tensile properties of short-glass-fiber and short-carbon-fiber-reinforced polypropylene composites. Composite Part A. 2000;31:1117–1125.10.1016/S1359-835X(00)00068-3
   Web of Science ®Google Scholar
• Hine PJ, Lusti HR, Gusev AA. Numerical simulation of the effects of volume fraction, aspect ratio and fiber length distribution on the elastic and thermoelastic properties of short fiber composites. Comp Sci Tech. 2002;62:1445–1453.10.1016/S0266-3538(02)00089-1
   Web of Science ®Google Scholar
• Norman DA, Robertson R. The effect of fiber orientation on the toughening of short fiber-reinforced polymers. J Appl Polym Sci. 2003;90:2740–2751.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Thomason JL. Structure-property relationships in glass reinforced polyamide, part 2: the effects of average fiber diameter and diameter distribution. Polym Comp. 2007;28:331–343.10.1002/(ISSN)1548-0569
   Web of Science ®Google Scholar
• Sanomura Y, Hayakawa K, Mizuno M, et al. Effects of process conditions on Young’s modulus and strength of extrudate in short-fiber reinforced polypropylene. Polym Comp. 2007;28:29–35.10.1002/(ISSN)1548-0569
   Web of Science ®Google Scholar
• Tucker CL, Liang E. Stiffness predictions for unidirectional short-fiber composites: review and evaluation. Compos Sci Tech. 1999;59:655–671.10.1016/S0266-3538(98)00120-1
   Web of Science ®Google Scholar
• Jiang B, Liu C, Zhang C, et al. The effect of non-symmetric distribution of fiber orientation and aspect ratio on elastic properties of composites. Composites Part B. 2007;38:24–34.10.1016/j.compositesb.2006.05.002
   Web of Science ®Google Scholar
• SG Advani. Molding: short-fiber composites. 2nd ed. Flow processing. New York (NY): Wiley Encyclopedia of Composites; 2012. p. 1–12.
   Google Scholar
• Liang S, Wang K, Yang H, et al. Crystal morphology and tensile properties of LLDPE containing PP fibers as obtained via dynamic packing injection molding. Polymer. 2006;47:7115–7122.10.1016/j.polymer.2006.08.021
   Web of Science ®Google Scholar
• Libanori R, Erb RM, Studart AR. Mechanics of platelet-reinforced composites assembled using mechanical and magnetic stimuli. ACS Appl Mater Interfaces. 2013;5(21):10794–10805.10.1021/am402975a
   PubMed Web of Science ®Google Scholar
• Silva CA, Viana JC, van Hattum FWJ, et al. Fiber orientation in injection molding with rotating flow. Polym Eng Sci. 2008;48(2):395–404.10.1002/(ISSN)1548-2634
   Web of Science ®Google Scholar
• Kimura T, Yoshino M, Yamane T, et al. Tobita, uniaxial alignment of the smallest diamagnetic susceptibility axis using time-depended magnetic fields. Langmuir. 2004;20:5669–5672.
   PubMed Web of Science ®Google Scholar
• Fratzl P. A composite matter of alignment. Science. 2012;335:177–178.10.1126/science.1215841
   PubMed Web of Science ®Google Scholar
• Watanabe Y. Evaluation of fiber orientation in ferromagnetic short-fiber reinforced composites by magnetic anisotropy. Science. 2012;335(6065):199–204.
   PubMedGoogle Scholar
• Papathanasiou TD. Flow-induced alignment in injection molding of fiber-reinforced polymer composites. In: Papathanasiou TD, Guell DC, editors. Flow-induced alignment in composite materials. Cambridge: Woodhead; 1997. p. 113–165.
   Google Scholar
• Gupta M, Wang KK. Fiber orientation and mechanical properties of short-fiber-reinforced injection-molded composites: Simulated and experimental results. Polym Compos. 1993;14(5):367–382.10.1002/(ISSN)1548-0569
   Web of Science ®Google Scholar
• Viana JC, Cunha AM, Billon N. The effect of the skin thickness and spherulite size on the mechanical properties of injection moldings. J Mater Sci. 2001;36(18):4411–4418.10.1023/A:1017970416968
   Web of Science ®Google Scholar
• Lee IS, Lee DJ. The fiber damage and mechanical properties of short-fiber reinforced composite depending on nozzle size variations in injection/mold sides. Trans Korean Soc Mech Eng. 2001;25(4):564–573.
   Google Scholar
• Fu SY, Hu X, Yue CY. Effects of fiber length and orientation distributions on the mechanical properties of short-fiber-reinforced polymers. J Soc Mater Sci Jpn. 1999;48(6):74–83.10.2472/jsms.48.6Appendix_74
   Google Scholar
• Kelly A, Tyson WR. Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum. J Mech Phys Solids. 1965;13:329–350.10.1016/0022-5096(65)90035-9
   Web of Science ®Google Scholar