References
- ASTM D 5961-08. Standard test method for bearing response of polymer matrix composite laminates. Annual Book of ASTM Standard, American Society for Testing and Materials.
- ASTM D 7332-07. Standard test method for measuring the fastener pull-through resistance of a fiber-reinforced polymer matrix composite. Annual Book of ASTM Standard, American Society for Testing and Materials.
- Hart-Smith LJ. Bolted joints in graphite-epoxy laminates, NASA CR-144899. Long Beach (CA): Douglas Aircraft Company; 1977 Jan.
- Chang F-K, Scott RA, Springer GS. Strength of mechanically fastened composite joints. J Compos Mater. 1982;16:470–494.10.1177/002199838201600603
- Chang F-K, Scott RA, Springer GS. Failure of composite laminates containing pin loaded holes – method of solution. J Compos Mater. 1984;18:255–278.10.1177/002199838401800305
- Aktas A, Lmrek H, Cunedioglu Y. Experimental and numerical failure analysis of pinned-joints in composite materials. Compos Struct. 2009;89:459–466.
- Miracle DB, Donaldson SL. ASM handbook. Composites. 2001;21:692–697.
- Ireman T. Three-dimensional stress analysis of bolted single-lap composite joints. Compos Struct. 1998;43:195–216.10.1016/S0263-8223(98)00103-2
- McCarthy CT, McCarthy MA. Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: Part II-effects of bolt-hole clearance. Compos Struct. 2005;71:159–175.10.1016/j.compstruct.2004.09.023
- Khashaba UA, Sallam HEM, Al-Shorbagy AE, et al. Effect of washer size and tightening torque on the performance of bolted joints in composite structures. Compos Struct. 2006;73:310–317.10.1016/j.compstruct.2005.02.004
- Soykok IF, Sayman O, Pasinli A. Effects of hot water aging on failure behaviour of mechanically fastened glass fiber/epoxy composite joints. Compos Part B. 2013;54:59–70.
- Hart-Smith LJ. Bolted joints in graphite-epoxy composites. NASA-CR-144899. Long Beach (CA): Douglas Aircraft Company; 1997 Jan. p. 16–20.
- McCarthy MA, McCarthy CT, Lawlor VP, et al. Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part I – model development and validation. Compos Struct. 2005;71:140–158.10.1016/j.compstruct.2004.09.024
- Egan B, McCarthy CT, McCarthy MA, et al. Modelling a single-bolt countersunk composite joint using implicit and explicit finite element analysis. Comput Mater Sci. 2012;64:203–208.10.1016/j.commatsci.2012.02.008
- Olmedo A, Santiuste C. On the prediction of bolted single-lap composite joints. Compos Struct. 2012;94:2110–2117.10.1016/j.compstruct.2012.01.016
- Warren KC, Lopez-Anido RA, Vel SS, et al. Progressive failure analysis of three-dimensional woven carbon composites in single-bolt, double-shear bearing. Compos Part B Eng. 2016;84:266–276.10.1016/j.compositesb.2015.08.082
- MSC. Nastran 2014 nonlinear user’s guide SOL 400. Newport Beach (CA): MSC Software Corporation.
- Dano M-L, Kamal E, Gendron G. Analysis of bolted joints in composite laminates: strain and bearing stiffness predictions. Compos Struct. 2007;79:562–570.10.1016/j.compstruct.2006.02.024
- Girard C, Dano M-L, Picard A, et al. Bearing behavior of mechanically fastened joints in composite laminates – part I: strength and local strains. Mech Adv Mater Struct. 2003;10:1–21.10.1080/15376490306740
- CYCOM® 5276-1 Technical Data Sheet. Available from: https://www.cytec.com/
- HL12, 97 specifications. Available from: http://www.lisi-aerospace.com
- Qin T, Zhao L, Zhang J. Fastener effects on mechanical behaviors of double-lap composite joints. Compos Struct. 2013;100:413–423.10.1016/j.compstruct.2013.01.008
- Steeve BE, Wingate RJ. Aerospace threaded fastener strength in combined shear and tension loading. NASA/TM-2012-217454. Huntsville (AL): Marshall Space Flight Center; 2012 Mar.
- Du A, Liu Y, Xin H, et al. Progressive damage analysis of PFRP double-lap bolted joints using explicit finite element method. Compos Struct. 2016;152:860–869.