Bending fracture rule for 3D-printed curved continuous-fiber composite

References

• Sachs E, Cima M, Comie J. Three-dimensional printing: rapid tooling and prototypes directly from a CAD model. CIRP Annals Manuf Technol. 1990;39:201–204.
   Google Scholar
• Berman B. 3-D printing: the new industrial revolution. Bus Horiz. 2012;55:155–162.
   Web of Science ®Google Scholar
• Guo N, Leu MC. Additive manufacturing: technology, applications and research needs. Front Mech Eng. 2013;8:215–243.
   Google Scholar
• Kumar S, Kruth J-P. Composites by rapid prototyping technology. Mater Des. 2010;31:850–856.
   Web of Science ®Google Scholar
• Berman B. 3D printing: the new industrial revolution. Bus Horiz. 2012;55:155–162.
   Web of Science ®Google Scholar
• Pham DT, Gault RS. A comparison of rapid prototyping technologies. Int J Mach Tools Manuf. 1998;38:1257–1287.
   Web of Science ®Google Scholar
• Thrimurthulu K, Pulak MP, Venkata N. Optimum part deposition orientation in fused deposition modeling. Int J Mach Tools Manuf. 2004;44:585–594.
   Web of Science ®Google Scholar
• Jones R, Haufe P, Sells E, et al. RepRap - the replicating rapid prototype. Robotica. 2011;29:177–191.
   Web of Science ®Google Scholar
• Anoop K, Ohdar RK, Mahapatra SS. Improving dimensional accuracy of fused deposition modelling processed part using grey Taguchi method. J Mater Des. 2009;30:4243–4252.
   Web of Science ®Google Scholar
• Ning H, Janowski GM, Vaidya UK, et al. Thermoplastic sandwich structure design and manufacturing for the body panel of mass transit vehicle. Compos Struct. 2007;80:82–91.
   Web of Science ®Google Scholar
• Love LJ, Kunc V, Rios O, et al. The importance of carbon fiber to polymer additive manufacturing. Mater Sci Addit Manuf. 2014;29:1893–1898.
   Google Scholar
• Fuda N, Weilong C, Junhua W, et al. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. J Compos Sci Technol. 2015;80:369–378.
   Google Scholar
• Suwanprateeb J, Sanngam R, Suvannapruk W, et al. Mechanical and in vitro performance of apatite-wollastonite glass ceramic reinforced hydroxyapatite composite fabricated by 3D-printing. J Mater Sci Mater Med. 2009;20:1281–1289.
   PubMed Web of Science ®Google Scholar
• Bakarich SE, Gorkin R 3rd, In Het Panhuis M, et al. Three-dimensional printing fiber reinforced hydrogel composites. ACS Appl Mater Interfaces. 2014;6:15998–16006.
   PubMed Web of Science ®Google Scholar
• Compton BG, Lewis JA. 3D-printing of lightweight cellular composites. Adv Mater. 2014;26:5930–5935.
   PubMed Web of Science ®Google Scholar
• Dimas LS, Buehler MJ. Modeling and additive manufacturing of bio-inspired composites with tunable fracture mechanical properties. Soft Matter. 2014;10:4436–4442.
   PubMed Web of Science ®Google Scholar
• Wang X, Jiangb M, Zhoub Z, et al. 3D printing of polymer matrix composites: A review and prospective. Compos Part B Eng. 2017;110:442–458.
   Web of Science ®Google Scholar
• Leigh SJ, Bradley RJ, Purssell CP, et al. A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One. 2012;7:e49365.
   PubMed Web of Science ®Google Scholar
• Tekinalp HL, Kunc V, Velez-Garcia GM, et al. Highly oriented carbon fiber–polymer composites via additive manufacturing. Compos Sci Technol. 2014;105:144–150.
   Web of Science ®Google Scholar
• Gray RW IV, Baird DG, Bohn JH. Thermoplastic composites reinforced with long fiber thermotropic liquid crystalline polymers for fused deposition modeling. Polym Compos. 1998;19:383–394.
   Web of Science ®Google Scholar
• Shofner ML, Lozano K, Rodriguez-Macias FJ, et al. Nanofiber-reinforced polymers prepared by fused deposition modeling. J Appl Polym Sci. 2003;89:3081–3090.
   Web of Science ®Google Scholar
• Pidcock GC, In Het Panhuis M. Extrusion printing of flexible electrically conducting carbon nanotube networks. Adv Funct Mater. 2012;22:4790–4800.
   Web of Science ®Google Scholar
• Zhong W, Li F, Zhang Z, et al. Short fiber reinforced composites for fused deposition modeling. Mater Sci Eng A. 2001;301:125–130.
   Web of Science ®Google Scholar
• Hsueh C-H. Young’s modulus of unidirectional discontinuous-fiber composites. Compos Sci Technol. 2000;60:2671–2680.
   Web of Science ®Google Scholar
• Tucker CL III, Liang E. Stiffness predictions for unidirectional short-fiber composites: review and evaluation. Compos Sci Technol. 1999;59:655–671.
   Web of Science ®Google Scholar
• Hine PJ, Lusti HR, Gusev AA. Numerical simulation of the effects of volume fraction, aspect ratio and fiber length distribution on the elastic and thermoelastic properties of short fiber composites. Compos Sci Technol. 2002;62:1445–1453.
   Web of Science ®Google Scholar
• Matsuzaki R, Ueda M, Namiki M, et al. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Sci Rep. 2016;6:23058.
   PubMed Web of Science ®Google Scholar
• Tian X, Liu T, Yang C, et al. Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites. Compos Part A Appl Sci Manuf. 2016;88:198–205.
   Web of Science ®Google Scholar
• Yang C, Tian X, Liu T, et al. 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance. Rapid Prototyping J. 2015;23:209–215.
   Web of Science ®Google Scholar
• Markforged Eiger/ Software. [ cited 2017May 14]. Available from: https://markforged.com/eiger/.
   Google Scholar
• Yamanaka Y, Todoroki A, Ueda M, et al. Fiber line optimization in single ply for 3D printed composites. Open J Compos Mater. 2016;6:121–131.
   Google Scholar
• Shahriar S, Mostafa MA, Zafer G. Design of variable-stiffness laminates using lamination parameters. Compos Part B Eng. 2006;37:301–309.
   Web of Science ®Google Scholar
• Parnas L, Oral S, Ceyhan U. Optimum design of composite structures with curved fiber courses. Compos Sci Technol. 2003;63:1071–1082.
   Web of Science ®Google Scholar
• Legranda X, Kellyb D, Croskyc A, et al. Optimisation of fiber steering in composite laminates using a genetic algorithm. Compos Struct. 2006;75:524–531.
   Web of Science ®Google Scholar
• Frank K, Koga Y, Todoroki A, et al. 3D printing of continuous carbon fiber reinforced thermo-plastic (CFRTP) tensile test specimens. Open J Compos Mater. 2016;6:18–27.
   Google Scholar
• Massey FJ. The Kolmogorov-Smirnov test for goodness of fit. J Am Stat Assoc. 1951;46:68–78.
   Web of Science ®Google Scholar
• MarthWorks Two-sample. F-test for equal variances; [ cited 2017 May 14]. Available from: https://www.mathworks.com/help/stats/vartest2.html.
   Google Scholar
• Toray, Technical Data Sheet. PD-YN4_01; [ cited 2017 May 14]. [accessed 2017 June 16] Available from: http://www.torayca.com/en/download/pdf/torayca.pdf.
   Google Scholar