Microstructure and mechanical properties of copper surface composite layers reinforced by nano and microscale SiC particles via friction stir processing

References

• Pezeshkian M, Ebrahimzadeh I, Gharavi F. Fabrication of Cu surface composite reinforced by Ni particles via friction stir processing: microstructure and tribology behaviors. J Tribol. 2018;140:011607–011607-8.
   Web of Science ®Google Scholar
• Suvarna Raju L, Kumar A. A novel approach for fabrication of Cu-Al2O3 surface composites by friction stir processing. Procedia Mate Sci. 2014;5:434–443.
   Google Scholar
• Barmouz M, Besharati Givi MK, Asadi P. Production of Cu/SiC nanocomposite layers by friction stir processing. Defect Diffus Forum. 2011;312:319–324.
   Google Scholar
• Cartigueyen S, Mahadevan K. Wear characteristics of copper-based surface-level microcomposites and nanocomposites prepared by friction stir processing. Friction. 2016;4:39–49.
   Web of Science ®Google Scholar
• Khosravi J, Besharati Givi MK, Barmouz M, et al. Microstructural, mechanical, and thermophysical characterization of Cu/WC composite layers fabricated via friction stir processing. Int J Adv Manuf Technol. 2014;74:1087–1096.
   Web of Science ®Google Scholar
• Attia AN. Surface metal matrix composites. Mater Des. 2001;22:451–457.
   Web of Science ®Google Scholar
• Romankov S, Hayasaka Y, Shchetinin IV, et al. Fabrication of Cu–siC surface composite under ball collisions. Appl Surf Sci. 2011;257:5032–5036.
   Web of Science ®Google Scholar
• Rajkumar K, Aravindan S. Microwave sintering of copper–graphite composites. J Mater Process Tech. 2009;209:5601–5605.
   Web of Science ®Google Scholar
• Kestursatya M, Kim JK, Rohatgi PK. Wear performance of copper-graphite composite and a leaded copper alloy. Mater Sci Eng A. 2003;339:150–158.
   Web of Science ®Google Scholar
• Roy P, Singh S, Pal K. Enhancement of mechanical and tribological properties of SiC- and CB-reinforced aluminium 7075 hybrid composites through friction stir processing. Adv Compos Mater. 2017;In Press:1–18. doi:10.1080/09243046.2017.1405596
   Web of Science ®Google Scholar
• Dai FZ, Lu JZ, Zhang YK, et al. Effect of submicron SiC particle on friction and wear properties of copper matrix composites under oil-lubricated condition. Adv Compos Mater. 2013;22:191–202.
   Web of Science ®Google Scholar
• Shamsipur A, Kashani-Bozorg SF, Zarei-Hanzaki A. The effects of friction-stir process parameters on the fabrication of Ti/SiC nano-composite surface layer. Surf Coat Technol. 2011;206:1372–1381.
   Web of Science ®Google Scholar
• Zener C. Grains, phases and interfaces: an interpretation of microstructure. Trans AIME. 1948;175:15–51.
   Google Scholar
• Rios PR. Overview no. 62: atheory for grain boundary pinning by particles. Acta Metall. 1987;35:2805–2814.
   Google Scholar
• Xing H, Cao X, Hu W, et al. Interfacial reactions in 3D-SiC network reinforced Cu-matrix composites prepared by squeeze casting. Mater Lett. 2005;59:1563–1566.
   Web of Science ®Google Scholar
• Zhu J, Liu L, Zhao H, et al. Microstructure and performance of electroformed Cu/nano-SiC composite. Mater Des. 2007;28:1958–1962.
   Web of Science ®Google Scholar
• Ling YH, Jt L, Ge CC, et al. Fabrication and evaluation of SiC/Cu functionally graded material used for plasma facing components in a fusion reactor. J Nucl Mater. 2002;303:188–195.
   Web of Science ®Google Scholar
• Schubert TH, Brendel A, Schmid K, et al. Interfacial design of Cu/SiC composites prepared by powder metallurgy for heat sink applications. Compos A. 2007;38:2398–2403.
   Web of Science ®Google Scholar
• Shabani MM, Paydar MH, Zamiri R, et al. Microstructural and sliding wear behavior of SiC-particle reinforced copper matrix composites fabricated by sintering and sinter-forging processes. J Mater Res Technol. 2016;5:5–12.
   Google Scholar
• Zhang YZ, Tu Y, Xi MZ. Characterization on laser clad nickel based alloy coating on pure copper. Surf Coat Technol. 2008;202:5924–5928.
   Web of Science ®Google Scholar
• Barmouz M, Besharati Givi MK, Seyfi J. On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: investigating microstructure, microhardness, wear and tensile behavior. Mater Character. 2011;62:108–117.
   Web of Science ®Google Scholar
• Sathiskumar R, Murugan N, Dinaharan I, et al. Characterization of boron carbide particulate reinforced in situ copper surface composites synthesized using friction stir processing. Mater Character. 2013;84:16–27.
   Web of Science ®Google Scholar
• Shamsipur A, Kashani-Bozorg SF, Zareie-Hanzaki A. Fabrication of Ti/SiC surface nano-composite layer by friction stir processing. Internat J Modern Phys CS. 2012;5:367–374.
   Google Scholar
• Shamsipur A, Kashani-Bozorg SF, Zareie-Hanzaki A. Wear assessment of Ti/SiC surface nano-composite layer and its associated CP-Ti substrate. Adv Mat Res. 2012;445:595–600.
   Google Scholar
• Shamsipur A, Kashani-Bozorg SF, Zareie-Hanzaki A. Surface modification of titanium by producing Ti/TiN surface composite layers via FSP. Acta Metall Sin-EngL. 2017;30:550–557.
   Web of Science ®Google Scholar
• Ghasemi-Kahrizsangi A, Kashani-Bozorg SF, Moshref-Javadi M. Effect of friction stir processing on the tribological performance of steel/Al2O3 nanocomposites. Surf Coat Tech. 2015;276:507–515.
   Web of Science ®Google Scholar
• Mishra RS, Ma ZY. Friction stir welding and processing. Mater Sci Eng R. 2005;50:1–78.
   Web of Science ®Google Scholar
• Sarmadi H, Kokabi AH, Seyed Reihani SM. Friction and wear performance of copper–graphite surface composites fabricated by friction stir processing (FSP). Wear. 2013;304:1–12.
   Web of Science ®Google Scholar
• Zoeram AS, Anijdan SHM, Jafarian HR, et al. Welding parameters analysis and microstructural evolution of dissimilar joints in Al/bronze processed by friction stir welding and their effect on engineering tensile behavior. Mater Sci Eng A. 2017;687:288–297.
   Web of Science ®Google Scholar
• Karami S, Jafarian H, Eivani AR, et al. Engineering tensile properties by controlling welding parameters and microstructure in a mild steel processed by friction stir welding. Mater Sci Eng A. 2016;670:68–74.
   Web of Science ®Google Scholar
• Lotfalian Saremi M, Mirsalehi SE, Shamsipur A. Investigation on metallurgical structure and mechanical properties of dissimilar Al 2024/Cu FSW T-joints. Trans Indian Inst Met. 2017;70:1869–1877.
   Web of Science ®Google Scholar
• Shamsipur A, Kashani-Bozorg SF, Zarei-Hanzaki A. Production of in-situ hard Ti/TiN composite surface layers on CP-Ti using reactive friction stir processing under nitrogen environment. Surf Coat Technol. 2013;218:62–70.
   Web of Science ®Google Scholar
• Humphreys FJ, Prangnell PB, Priestner R. Fine-grained alloys by thermomechanical processing. Curr Opin Solid State Mater Sci. 2001;5:15–21.
   Web of Science ®Google Scholar
• Rohrer GS. Introduction to grains, phases, and interfaces and interpretation of microstructure. Metall Mater Trans B. 2010;41:1061–1100.
   Web of Science ®Google Scholar
• Xia L, Jia B, Zeng J, et al. Wear and mechanical properties of carbon fiber reinforced copper alloy composites. Mater Character. 2009;60:363–369.
   Web of Science ®Google Scholar
• Rejil CM, Dinaharan I, Vijay SJ, et al. Microstructure and sliding wear behavior of AA6360/(TiC + B4C) hybrid surface composite layer synthesized by friction stir processing on aluminum substrate. Mater Sci Eng A. 2012;552:336–344.
   Web of Science ®Google Scholar
• Ramesh CS, Ahmed RN, Mujeebub MA, et al. Development and performance analysis of novel cast copper–siC–gr hybrid composites. Mater Des. 2009;30:1957–1967.
   Web of Science ®Google Scholar
• Raaft M, Mahmoud TS, Zakaria HM, et al. Microstructural, mechanical and wear behavior of A390/graphite and A390/Al2O3 surface composites fabricated using FSP. Mater Sci Eng A. 2011;528:5741–5746.
   Web of Science ®Google Scholar
• Mahmoud ERI, Takahash M, Shibayanagi T, et al. Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing. Wear. 2010;268:1111–1121.
   Web of Science ®Google Scholar
• Zhang YS, Han Z, Wang K, et al. Friction and wear behaviors of nanocrystal-line surface layer of pure copper. Wear. 2006;260:942–948.
   Web of Science ®Google Scholar
• Barmouz M, Asadi P, Basharati Givi MK, et al. Investigation of mechanical properties of Cu/SiC composite fabricated by FSP⁄⁄ effect of SiC particles size and volume fraction. Mater Sci Eng A. 2011;528:1740–1749.
   Web of Science ®Google Scholar
• Wang W, Shi QY, Liu P, et al. A novel way to produce bulk SiCp reinforced aluminum metal matrix composites by friction stir processing. J Mater Process Technol. 2009;209:2099–2103.
   Web of Science ®Google Scholar
• Barmouz M, Besharati Givi MK. Fabrication of in situ Cu/SiC composites using دmulti-pass friction stir processing: evaluation of micro structural, porosity, mechanical and electrical behavior. Appl Sci Manuf. 2011;42:1445–1453.
   Web of Science ®Google Scholar
• Kato H, Takama M, Iwai Y, et al. Wear and mechanical properties of sintered copper–tin composites containing graphite or molybdenum disulfide. Wear. 2003;255:573–578.
   Web of Science ®Google Scholar
• Jincheng X, Hui Y, Long X, et al. Effects of some factors on the tribological properties of the short carbon fiber-reinforced copper composite. Mater Des. 2004;25:489–493.
   Web of Science ®Google Scholar
• Jun Z, Jincheng X, Wei H, et al. Wear performance of the lead free tin bronze matrix composite reinforced by short carbon fibers. Appl Surf Sci. 2009;255:6647–6651.
   Web of Science ®Google Scholar
• Tang Y, Liu H, Zhao H, et al. Friction and wear properties of copper matrix composites reinforced with short carbon fibers. Mater Des. 2008;29:257–261.
   Web of Science ®Google Scholar
• Bajwa S, Rainforth WM, Lee WE. Sliding wear behaviour of SiC–al2O3 nanocomposites. Wear. 2005;259:553–561.
   Web of Science ®Google Scholar
• Aldajah SH, Ajayi OO, Fenske GR, et al. Effect of friction stir processing on the tribological performance of high carbon steel. Wear. 2009;267:350–355.
   Web of Science ®Google Scholar