345
Views
7
CrossRef citations to date
0
Altmetric
Articles

An experimental study on tensile and bending properties of biaxial warp knitted textile composites

, , &
Pages 73-88 | Received 30 Oct 2016, Accepted 29 Jun 2019, Published online: 08 Jul 2019

References

  • Khondker OA, Fukui T, Nakai A, et al. Initial fracture of the welt weft-knitted textile composites. Compos Pt A. 2004;35:1185–1194.
  • Asp LE, Edgren F, Sjögren A, Effects of stitch pattern on the mechanical properties of non-crimp fabric composites, 11th European Conference on Composite Materials (11th ECCM), Rhodes, Greece, pp.1–6, (2004).
  • Sugie T, Nakai A, Hamada H. Effect of CF/GF fibre hybrid on impact properties of multi-axial warp knitted fabric composite materials. Compos Pt A. 2009;40:1982–1990.
  • Arteiro A, Catalanotti G, Xavier J, et al. Notched response of non-crimp fabric thin-ply laminates. Compos Sci Tech. 2013;79:97–114.
  • Kazemahvazi S, Zenkert D, Burman M. Notch and strain rate sensitivity of non-crimp fabric composites. Compos Sci Tech. 2009;69:793–800.
  • Asp LE, Juntikka R. High velocity impact on NCF reinforced composites. Compos Sci Technol. 2009;69:1478–1482.
  • Truong TC, Vettori M, Lomov S, et al. Carbon composites based on multi-axial multi-ply stitched preforms. Part 4. Mechanical properties of composites and damage observation. Compos Pt A. 2005;36:1207–1221.
  • Mattsson D, Joffe R, Varna J. Damage in NCF composites under tension: effect of layer stacking sequence. Eng Fract Mecha. 2008;75:2666–2682.
  • Aktas M, Atas C, Icten BM, et al. An experimental investigation of the impact response of composite laminates. Comp Struct. 2009;87:307–313.
  • Khashaba UA, Sebaey TA, Alnefaie KA. Failure and reliability analysis of pinned-joints composite laminates: effects of stacking sequences. Compos Pt B. 2013;45:1694–1703.
  • Aktas A, Dirikolu MH. The effect of stacking sequence of carbon epoxy composite laminates on pinned-joint strength. Compos Struct. 2003;62:107–111.
  • Hu Y, Yang M, Zhang J, et al. Effect of stacking sequence on the torsional stiffness of the composite drive shaft. Adv Compos Mate. 2017;26:537–552.
  • Sarvestani HY. Effects of layup sequences on stresses of thick composite cantilever tubes. Adv Compos Mate. 2017;26:273–294.
  • Park HJ. Effect of stacking sequence and clamping force on the bearing strengths of mechanically fastened joints in composite laminates. Compos Struct. 2001;53:213–221.
  • Sikarwar RS, Velmurugan R, Gupta NK. Influence of fiber orientation and thickness on the response of glass/epoxy composites subjected to impact loading. Compos Pt B. 2014;60:627–636.
  • Esfahania MT, Kabirb MZ, Raranic MH. An analytical approach for local buckling analysis of initially delaminated composite thin-walled columns with open and closed sections. Adv Compos Mate. 2018;27:85–105.
  • Kim KY, Chun HJ, Kang KT, et al. Thermal residual stresses in FSS layer-embedded composite plates in co-cure bonding. Adv Compos Mate. 2017;26:511–536.
  • Ogasawara T, Hanamitsu S, Ogawa T, et al. Mechanical properties of cross-ply and quasiisotropic composite laminates processed using aligned multi-walled carbon nanotube/epoxy prepreg. Adv Compos Mate. 2017;26:157–168.
  • Yokozeki T, Aoki Y, Ogasawara T. Experimental characterization of strength and damage resistance properties of thin-ply carbon fiber/toughened epoxy laminates. Compos Struct. 2008;82:382–389.
  • Guillamet G, Turon A, Costa J, et al. Damage occurrence at edges of non-crimp-fabric thin-ply laminates under off-axis uniaxial loading. Compos Sci Tech. 2014;98:44–50.
  • Tsai SW, Sihn S, Kim RY. Thin-ply composites, 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Austin, Texas, USA, pp. 1–5, (2005).
  • Lee J, Soutis C. A study on the compressive strength of thick carbon fibre epoxy laminates. Compos Sci Tech. 2007;67:2015–2026.
  • Tan KT, Yoshimura A, Watanabe N, et al. Effect of stitch density and stitch thread thickness on damage progression and failure characteristics of stitched composites under out-of-plane loading. Compos Sci Tech. 2013;74:194–204.
  • Sihn S, Kim RY, Kawabe K, et al. Experimental studies on thin-ply laminated composites. Compos Sci Tech. 2007;67:996–1008.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.