References
- Pervaiz M, Panthapulakkal S, Birat KC, et al. Emerging trends in automotive lightweighting through novel composite materials. Mater Sci Appl. 2016;7(01):26.
- Cheah LW: Cars on a diet: the material and energy impacts of passenger vehicle weight reduction in the US. Doctoral dissertation, Massachusetts Institute of Technology (2010)
- Joost WJ. Reducing vehicle weight and improving US energy efficiency using integrated computational materials engineering. Jom. 2012;64(9):1032–1038.
- Holbery J, Houston D. Natural-fiber-reinforced polymer composites in automotive applications. Jom. 2006;58(11):80–86.
- Ashori A. Wood–plastic composites as promising green-composites for automotive industries. Bioresour Technol. 2008;99(11):4661–4667.
- Liu Z, Lu J, Zhu P. Lightweight design of automotive composite bumper system using modified particle swarm optimizer. Compos Struct. 2016;140:630–643.
- Ahmed A, Wei L. Introducing CFRP as an alternative material for engine hood to achieve better pedestrian safety using finite element modeling. Thin-Wall Struct. 2016;99:97–108.
- Kumar N, Das D. Fibrous biocomposites from nettle (Girardinia diversifolia) and poly (lactic acid) fibers for automotive dashboard panel application. Compos Part A. 2017;130:54–63.
- Mangino E, Carruthers J, Pitarresi G. The future use of structural composite materials in the automotive industry. Int J Veh Des. 2007;44(3–4):211–232.
- Feraboli P, Masini A, Bonfatti A. Advanced composites for the body and chassis of a production high performance car. Int J Veh Des. 2007;44(3–4):233–246.
- Al-Qureshi HA. Automobile leaf springs from composite materials. J Mater Process Technol. 2001;118(1–3):58–61.
- Talib ARA, Ali A, Goudah G, et al. Developing a composite based elliptic spring for automotive applications. Mater Des. 2010;31(1):475–484.
- Rajendran I, Vijayarangan S. Optimal design of a composite leaf spring using genetic algorithms. Comput Struct. 2001;79(11):1121–1129.
- Hufenbach WA, Kostka P, Maron B, et al. Development and investigation of a textile-reinforced thermoplastic leaf spring with integrated sensor networks. Proc Mater Sci. 2013;2:173–180.
- Ashwini K, Rao CM. Design and analysis of leaf spring using various composites–an overview. Mater Today Proc. 2018;5(2):5716–5721.
- Yinhuan Z, Ka X, Zhigao H: Finite element analysis of composite leaf spring. In Computer Science & Education (ICCSE), 6th Int. Conf. on 316–319 (2011) Singapore: IEEE.
- Subramanian C, Senthilvelan S. Short‐term flexural creep behavior and model analysis of a glass‐fiber‐reinforced thermoplastic composite leaf spring. J Appl Poly Sci. 2011;120(6):3679–3686.
- Singh H, Brar GS. Characterization and investigation of mechanical properties of composite materials used for leaf spring. Mater Today Proc. 2018;5(2):5857–5863.
- Kong YS, Abdullah S, Omar MZ, et al. Failure assessment of a leaf spring eye design under various load cases. Eng Fail Anal. 2016;63:146–159.
- Kong YS, Omar MZ, Chua LB, et al. Fatigue life prediction of parabolic leaf spring under various road conditions. Eng Fail Anal. 2014;46:92–103.
- Kumar K, Aggarwal M. Fatigue life prediction: A comparative study for a three layer EN45A parabolic leaf spring. Eng Solid Mech. 2015;3(3):157–166.
- Duruş M, Kırkayak L, Ceyhan A, et al. Fatigue life prediction of Z type leaf spring and new approach to verification method. Proc Eng. 2015;101:143–150.
- Černý I, Mayer RM. Fatigue of selected GRP composite components and joints with damage evaluation. Compos Struct. 2012;94(2):664–670.
- Qian C, Shi W, Chen Z, et al. Fatigue reliability design of composite leaf springs based on ply scheme optimization. Compos Struct. 2017;168:40–46.
- Roy DK, Saha KN. Nonlinear analysis of leaf springs of functionally graded materials. Proc Eng. 2013;51:538–543.
- Venkatesan M, Gandhi VS, Janarthan E. Performance analysis of composite leaf spring in a defense sumo vehicle. J Eng Sci Technol. 2015;10(5):680–691.
- Mukhopadhyay NK, Das SK, Ravikumar B, et al. Premature failure of a leaf spring due to improper materials processing. Eng Fail Anal. 1997;4(3):161–170.
- Fuentes JJ, Aguilar HJ, Rodríguez JA, et al. Premature fracture in automobile leaf springs. Eng Fail Anal. 2009;16(2):648–655.
- Shokrieh MM, Rezaei D. Analysis and optimization of a composite leaf spring. Compos Struct. 2003;60(3):317–325.
- Yu WJ, Kim HC. Double tapered FRP beam for automotive suspension leaf spring. Compos Struct. 1988;9(4):279–300.
- Beardmore P. Composite structures for automobiles. Compos Struct. 1986;5(3):163–176.
- ASTM International. ASTM D3039/3039M standard test method for tensile properties of polymer matrix composite materials. 2008. United States.
- Beardmore P, Johnson CF. The potential for composites in structural automotive applications. Compos Sci Technol. 1986;26(4):251–281.
- SAE Spring Committee. Spring design manual. USA: Society of Automotive Engines; 1990. p. 356–362.
- Subramanian C, Senthilvelan S. Development and preliminary performance evaluation of discontinuous fibre reinforced thermoplastic leaf spring. Proceedings of the Institution of Mechanical Engineers, Part L. J Mater Des Appl. 2009;223(3):131–142.
- Behera BK, Dash BP. Mechanical behavior of 3D woven composites. Mater Des. 2015;67:261–271.
- Saleh MN, Yudhanto A, Potluri P, et al. Characterising the loading direction sensitivity of 3D woven composites: effect of z-binder architecture. Compos Part A Appl Sci Manuf. 2016;90:577–588.
- Dai S, Cunningham PR, Marshall S, et al. Influence of fibre architecture on the tensile, compressive and flexural behaviour of 3D woven composites. Compos Part A Appl Sci Manuf. 2015;69:195–207.
- Tong L, Mouritz AP, Bannister MK. Manufacture of 3D fibre preforms. 1st. 3D Fibre Reinf. Polym. Compos. 2009. 13–46. Elsevier, Netherlands.
- Stig F, Hallström S. Influence of crimp on 3D-woven fibre reinforced composites. Compos Struct. 2013;95:114–122.