References
- Tian X, Liu T, Yang C, et al. Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites. Compos Part A. 2016;88:198–205.
- Goh GD, Dikshit V, Nagalingam AP, et al. Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics. Mater Des. 2018;137:79–89.
- Klift F, Koga Y, Todoroki A, et al. 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens. Open J Compos Mater. 2016;6(1):18–27.
- Liu S, Li Y, Li N. A novel free-hanging 3D printing method for continuous carbon fiber reinforced thermoplastic lattice truss core structures. Mater Des. 2018;137:235–244.
- Yang C, Tian X, Liu T, et al. 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance. Rapid Prototyp J. 2017;23(1):209–215.
- Justo J, Távara L, García-Guzmán L, et al. Characterization of 3D printed long fibre reinforced composites. Compos. Struct. 2018;185:537–548.
- Koga. Y, Todoroki. A. Three-dimensionally printed joint for carbon fibre reinforced plastics. Adv Compos Mater. 2019;28(2):147–161.
- Yamawaki M, Kono Y. Fabrication and mechanical characterization of continuous carbon fiber-reinforced thermoplastic using a preform by three-dimensional printing and via hot-press molding. Adv Compos Mater. 2018;27(2):209–219.
- Sugiyama K, Matsuzaki R, Ueda M, et al. 3D printing of composite sandwich structures using continuous carbon fiber and fiber tension. Compos Part A. 2018;113:114–121.
- Yamanaka Y, Todoroki A, Ueda M, et al. Fiber line optimization in single ply for 3D printed composites. Open J Compos Mater. 2016;6(4):121–131.
- Matsuzaki R, Ueda M, Namiki M, et al. Effect of set curvature and fiber bundle size on the printed radius of curvature by a continuous carbon fiber composite 3D printer. Addit Manuf. 2018;24:93–102.
- Vijayaraghavan V, Garg A, Lam J, et al. Process characterisation of 3D printed FEM components using improved evolutionary computational approach. Int J Adv Manuf Technol. 2015;78(5–8):781–793.
- Matsuzaki R, Ueda M, Namiki M, et al. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Sci Rep. 2016;6:1–7.
- Zhang H, Yang D, Sheng Y. Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites: A preliminary numerical study. Compos. PartB, 2018;151:256–264.
- Fischer A, Rommel S, Bauernhansl T. New fiber matrix process with 3D fiber printer-A strategic in process integration of endless fibers using fused deposition modeling (FDM). Adv. Inf. Commun. Technol. 2013;411:167–175.
- Hou Z, Tian X, Zhang J, et al. 3D printed continuous fibre reinforced composite corrugated structure. Compos Struct. 2018;184:1005–1010.
- Tekinalp H, Kunc V, Velez-Garcia G, et al. Highly oriented carbon fiber-polymer composites via additive manufacturing. Compos Sci Technol. 2014;105:144–150.
- Ning F, Cong W, Hu Y, et al. Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: effects of process parameters on tensile properties. J Compos Mater. 2017;51(4):451–462.
- Li N, Li Y, Liu S. Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing. J Mater Process Technol. 2016;238:218–225.
- Ishii K, Todoroki A, Mizutani Y, et al. Bending fracture rule for 3D-printed curved continuous-fiber composite. Adv Compos Mater. 2019;28(4):383–395.
- Tohgo K, Hirako Y, Ishii H. Influence of resin on splitting fracture toughness in unidirectional CFRP. Transactions of the JSME. 1995;61(94):959–964.