References
- Hu Y, Geng W, You H, et al. Modification of a phenolic resin with epoxy-and methacrylate-functionalized silica sols to improve the ablation resistance of their glass fiber-reinforced composites. Polymers. 2014;6:105–113.
- Takahashi J, Kemmochi K, Watanabe J, et al. Development of ultra-high temperature testing equipment and some mechanical and thermal properties of advanced carbon/carbon composites. Adv Compos Mater. 1995;5:73–86.
- Kubota Y, Fukuda K, Hatta H, et al. Comparison of thermal deformations of carbon fiber-reinforced phenolic matrix ablators by arc-plasma wind tunnel heating and quasi-static heating. Adv Compos Mater. 2015;24:179–195.
- Hirai K, Matsuura Y, Kinefuchi K, et al. Experimental investigation on thermochemical phenomena in SiFRP. Adv Compos Mater. 2012;21:459–475.
- Elwan I, Jabra R, Arafeh MH. Preparation and ablation performance of lightweight phenolic composite material under oxyacetylene torch environment. J Aerosp Technol Manage. 2018;10.
- Bessire BK, Minton TK. Decomposition of phenolic impregnated carbon ablator (PICA) as a function of temperature and heating rate. ACS Appl Mater Interfaces. 2017;9:21422–21437.
- Bessire BK, Lahankar SA, Minton TK. Pyrolysis of phenolic impregnated carbon ablator (PICA). ACS Appl Mater Interfaces. 2014;7:1383–1395.
- Ma Y, Yang Y, Lu C, et al. Extraordinary improvement of ablation resistance of carbon/phenolic composites reinforced with low loading of graphene oxide. Compos Sci Technol. 2018;167:53–61.
- Chen Y-K, Milos FS. Ablation and thermal response program for spacecraft heatshield analysis. J Spacecraft Rockets. 1999;36:475–483.
- Sabagh S, Azar AA, Bahramian AR. High temperature ablation and thermo-physical properties improvement of carbon fiber reinforced composite using graphene oxide nanopowder. Compos Part A Appl Sci Manuf. 2017;101:326–333.
- Natali M, Monti M, Kenny JM, et al. A nanostructured ablative bulk molding compound: development and characterization. Compos Part A Appl Sci Manuf. 2011;42:1197–1204.
- Ding J, Huang Z, Qin Y, et al. Improved ablation resistance of carbon–phenolic composites by introducing zirconium silicide particles. Compos Part B Eng. 2015;82:100–107.
- Chen Y, Chen P, Hong C, et al. Improved ablation resistance of carbon–phenolic composites by introducing zirconium diboride particles. Compos Part B Eng. 2013;47:320–325.
- Eslami Z, Yazdani F, Mirzapour MA. Thermal and mechanical properties of phenolic-based composites reinforced by carbon fibres and multiwall carbon nanotubes. Compos Part A Appl Sci Manuf. 2015;72:22–31.
- Wang Z-J, Kwon D-J, Gu G-Y, et al. Ablative and mechanical evaluation of CNT/phenolic composites by thermal and microstructural analyses. Compos Part B Eng. 2014;60:597–602.
- Subha S, Singh D, Saikiran P, et al. Ablation and mechanical characterization of carbon-phenolic nano composites. Mater Today Proc. 2018;5:24448–24456.
- Yum SH, Kim SH, Lee WI, et al. Improvement of ablation resistance of phenolic composites reinforced with low concentrations of carbon nanotubes. Compos Sci Technol. 2015;121:16–24.
- Ko SJ, Lee GH, Shin YC, et al. Improvement of ablation resistance of epoxy composites reinforced with low concentrations of multi walled carbon nanotubes. Compos Part A Appl Sci Manuf. 2019;124:105471.
- Kim JH, Pham TV, Hwang JH, et al. Boron nitride nanotubes: synthesis and applications. Nano Convergence. 2018;5:17.
- Ahmad MS, Farooq U, Subhani T. Effect of multiwall carbon nanotubes on the ablative properties of carbon fiber-reinforced epoxy matrix composites. Arab J Sci Eng. 2015;40:1529–1538.
- Tzeng -S-S, Lin Y-H. Formation of graphitic rods in carbon/carbon composites reinforced with carbon nanotubes. Carbon. 2013;52:617–620.
- Laušević Z, Marinković S. Mechanical properties and chemistry of carbonization of phenol formaldehyde resin. Carbon. 1986;24:575–580.
- Lanticse-Diaz LJ, Tanabe Y, Enami T, et al. The effect of nanotube alignment on stress graphitization of carbon/carbon nanotube composites. Carbon. 2009;47:974–980.
- Kumar N, Pandian R, Das P, et al. High-temperature phase transformation and low friction behaviour in highly disordered turbostratic graphite. J Phys D Appl Phys. 2013;46:395305.